|
| 1 | Excavation in foundation in ordinary soil (Loam, clay or sand) including ift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplusearth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches (Where machine can not reach/move) PWD SOR 2022, Ch. 1, Item No.251(a) |
| 2 | Providing and laying in cement concrete in 6:4:1 (stone ballast 8 (40 mm nominal size) 4 approved coarse sand: 1 cement including supply of all material labour and T & P etc. required for proper completion of the work (sor S. No-281) 2022 |
| 3 | First class Brick Work in 14 one cement & four Coarse sand of 2:20 FM mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work. [305a 2022 |
| 4 | Coment Concrete with 2 cm gauge approved stone gritt, coarse sand & cament in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (279a-2022) |
| 5 | 12 mm thick cement plaster with cement and coarse sand mortar in 1:4 over brickwork minimum thickness not to be less than 1 cm, including supply of all matonal, Labour T&P etc. required for proper completion of work. (13:11-584 now itom) 2022 |
| 6 | Finishing wall with weather coat by premium acrylic exterior paint applied 3.28 lt/10 sqm (Asian or Berger Brand) of approved make and quality on wall with two or more coat to give an oven shade including a priming coat with coment primer of approved brand and manufacturer exterior primer applied @ 2.20kg/10 sqm after thoroughly brushing the surface free from mortar dropping and other foreign matters and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work UPPWD SOR 2022 SI No. 15.23 [New Item] |
| 7 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR2023(10.1] |
| 8 | Painting or vanishing work in small areas or new wood work with one coat (upto one square moter jof ready mix priming paint but for one coat after first coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-1950. (641+642/2022 |
| 9 | Supply and fixing of 80 mm thick gray colour precast cement concrete shape interlocking paver blocks with top layer of minimum 8 mm thickness having plan dimension 200*(160+120) of o.p. cement, smooth high gloss finish, skid resistant, manufactured from rubber moulds through vibro compression mechanism the compressive strength of concrete paver block shall not be less than 40 mpa (M-40) and weight 5kg per no. confirming to is: 15658-2006 and also including levelling and dressing of surface up to required levels and slopes, filling joints with local sand, including cost of material, labour, T&Petc. required for proper complition of the work as directed by engineer incharge (A.R) |
| 10 | Providing wall putty an new surface w approved quality material of Berget/JK/Birta or similar maxe 2 coats 8 No 15 26 New tem |
| 11 | Earth work in cutting 5km or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M in depth and earth work in embankment to be in 20 cm, layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M. distance as directed by the Engineer Incharge, excluding Royallity. Wherever applicable for small work or Abadi area. (Whore machine con not reach/move) SOR 231A +253A cartage of earth for filling from 5 km |
| 12 | First class Brick Work in 14 one cement & four Coarse sand of 2.20 FM. mortar in superstructure including supply of all materials, labour and T&P etc. requried for proper completion of the work (305a+309-31012022 one brick wall |
| 13 | R.C.C. work with Cement approved coarse sand and 2 cm. (3/4\") gauge approved stone ballast in the proportions of 1.1%.3 but in R.C.C. column in excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W. G.G.I., binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and T & P etc. required for proper completion of the work Excluding cost of Binding wire, sor 2022 [289] |
| 14 | Steel reinforcement for R.C.C. work including straightening. cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars dsr 2023 (5.22.1) |
| 15 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 DSR-2023, ANALYSIS RATE |
| 16 | Same as above item no. 253 (a) but mechanically compected to achieve 95% proctors density including arrange-ment of water, settlement and all T&P charges including roller and its fuel charges (Roller charges accounted for @ 1700.00 per day with diesel for output of 325 cum per day), Add extra to item no. 253 (a) Please Enable Macros to View BoQ information |
