|
| 1 | Repairing of Almirah Large Steel with shelves (FD-67 / 1031) including rectifying the dents & bends,straightening of doors, re-aligning hinges and carrying out necessary welding works whatever required to make the almirah serviceable and Preparing the surfaces by removing rust and cleaning with sand paper and applying two coats of synthetic enamel spray painting, olive green / smoke grey colour, both internally and externally (includes legs, shelves etc), complete all asspecified and directed. |
| 2 | All as per item No 1.00 but of Almirah Med Steel with shelves (FD-243 /1032). |
| 3 | Taking down old and unserviceable locks and provision of new locks of6-levers of approved quality to suit the existing for Almirah large / medium steel with shelves (FD-67/1031 & FD-243 / 1032 ), complete all as specified in the drawing and as directed. |
| 4 | Taking down old and unserviceablehandle and provision of new chromium plated handle of approved quality to suit the existing for Almirah large / medium steel with shelves (FD-67 / 1031 & FD-243 / 1032), complete all as shown in drawing and all as specified and directed. |
| 5 | Removing old and damaged seat and back ofChair CBA steel with or without arms ( FD-75(M)) and provision of new seat and back of size 450 mm x 410 mm , with frame size of 40 x 25 mm made of second class hardwood, to existing shape and duly canned with 0.40 mm thick and 2 mm wide plastic cane, laid in approved pattern (i.e., Godrej pattern) , the seatshall be fitted to the steel frame with 6 mm dia 75 mm long bolts, nuts and washers,including painting the wooden surfaces and tublar pipe frame,two coats of synthetic enamel paintcomplete all as specified in the drawing and as directed. |
| 6 | Removing old and damaged arms rest ofChair CBA steel with arms ( FD-75(M) ) and provision ofnew arm rests made of second class hardwood,to existing shape including painting the wooden surfaces two coats of synthetic enamel paintcomplete all as specified in the drawing and as directed. |
| 7 | Removal of old and unserviceable fabricand foam from the seat and back of Chair revolving low Back (Trade Pattern) and replacing with new approved quality fabric (cost not less than Rs 350/- Metre) and 50mm thick cushion of 32 density, quality and design, forcompleteall as specified in the drawing and as directed. |
| 8 | All as per item No 7.00 but of Chair Revolving Medium Back with Arms (TP). |
| 9 | All as per item No 7.00 but of Chair executive revolving High Back(TP). |
| 10 | All as per item No 7.00 but of Chair computer (FD/E6/MAP/01) |
| 11 | Replacing old and damaged hand rest of chair RevolvingLow, Medium and High Backs (Trade Pattern) withnew hand rest made of polyurethane material to suit the existing size and design, completeall as specified in the drawing and as directed. |
| 12 | Replacing old, damaged and unserviceablehydraulic steel assembly of approvedquality to suit the existing size and design of chair revolving/executivelow,high and medium backs (Trade Pattern)and chair computer complete all as specified in the drawing and as directed. |
| 13 | Replacing old, damaged base platform withnew base platform made of hard PVC of good quality to suit the existing size and design of chair revolving low, high and medium backs (Trade Pattern) and Chair Computer all as specified in the drawing and as directed. |
| 14 | Replacing old, damaged and unserviceable tiling bolt assembly (Base plate)with new tiling service assembly of approvedquality to suit the existing size and design of chair revolving low, high and medium backs (Trade Pattern)complete all as specified in the drawing and as directed. |
| 15 | Replacing old, damaged and unserviceable caster wheel 50mm dia from Chairs Revolving all type (Trade Pattern) andChair computer complete all as specified in the drawing and as directed. |
| 16 | Removing unserviceable plywood from Charpoy GI Pipe with plywood top (FD-220) and supply and fix plywood 12mm thick, 7 ply,BWR grade, commercial face with ISI markedof size 1980mm x 900mm with edges rounded and fixed to charpoy using 8 Nos of 6mm dia, 75mm long bolt and nuts with plate washers, carrying out necessary welding works if required, welding of 2 Nos of MS flat iron 40 mm x 5 mm complete all as specified in the drawing and as directed. |
| 17 | Taking down unserviceableofLegs (Threads wornout) of GI Charpoy and provisioning with suitable 32 mm GI pipe legscomplete all as specified in the drawing and as directed. |
| 18 | Taking down unserviceableAngle Elbowof GI Charpoy and provisioning with suitable 32 mm GIAngle Elbowcomplete all as specified in the drawing and as directed. |
| 19 | Repairs and maintenance ofTable office Clerksteel(FD-84(M)/1004) by taking out drawer, greasing drawer channels, refixing the drawer without any damage after painting the entire steel surfaces with two coats of synthetic enamel spray paint (Olive green / smoke grey colour) after preparation of surfaces,including carrying out necessary welding works if required and providingPVC / rubber shoe / bush to legs etc., completeall as specified in the drawing and as directed. |
| 20 | All as per item No 19.00but of TableOffice Officer steel (FD-84(M)) |
| 21 | Removingthe existing unserviceable table tops ofTable office Clerksteel(FD-84(M)/1004) and fixing newtable topswith 19mm thickpre-laminated particle boardexterior grade, ISI marked with natural teak shade on one side and white shade of approved quality on the other side. Border with 4mm thick teak wood beading all around the top duly french polished all as specified in the drawing and as directed. |
| 22 | All as per item No 21.00but of TableOffice Officer steel (FD-84(M)) |
| 23 | All as per item No 3.00but of Table office Clerk, TableOffice Officer steel (FD-84(M)/1004) |
| 24 | Repairs and maintenance of TABLE COMPUTER (FD-E/06/MAP/03) and removingthe existing unserviceable Table topofand fixing of new top made outof pre-laminated particle board 18 mm thick, exterior grade with natural teak shade on one side and white shadeon the other side of approved quality. Border with 4mm thick teak wood beading all around the top duly french polished all as specified in the drawing and as directed.. |
| 25 | Removingthe existing unserviceable Bottom shelf of TABLE COMPUTER and fixing shelf made outof pre-laminated particle board 18 mm thick exterior grade with natural teak shade on one side and white shadeon the other side of approved quality. Border with 4mm thick teak wood beading all around the shelf duly french polished all as specified in the drawing and as directed. |
| 26 | Removingthe existing unserviceable Key board tray of TABLE COMPUTER and fixing newKey board tray made outof pre-laminated particle board 18 mm thick, exterior grade with natural teak shade on one side and white shade of approved quality on the other side. Border with 4mm thick teak wood beading all around the key board duly french polished all as specified in the drawing and as directed. |
| 27 | Removingthe existing unserviceable Pull out tray (Mouse tray)of TABLE COMPUTER and fixing newPull out traymade outof pre-laminated particle board 18 mm thick, exterior grade with natural teak shade on one side and white shade of approved quality on the other side. Border with 4mm thick teak wood beading all around the top duly french polished as specified in the drawing and as directed. |
| 28 | Removingthe existing unserviceable drawerof TABLE COMPUTER and fixing new Drawer 75mm deep made of pre-laminated particle board 18 mm thick, exterior grade with natural teak shade on one side and white shadeon the other side of approved quality and providing suitable knobfor the drawer as specified in the drawing and as directed. |
| 29 | Removingthe existing unserviceable Telescopic channelsof TABLE COMPUTER and fixing newfor key board tray, pull out tray and drawer of suitable size and of approved quality as specified in the drawing and as directed. |
| 30 | Repairing of Rack shoe steel (FD/E6/MAP/02(R)) and Preparing the surfaces by removing rust and cleaning with sand paper and applying two coats of synthetic enamel spray painting, black colour, completeall as specified in the drawing and as directed. |
| 31 | Removingthe existing unserviceabletopof teapoy verandah MAP (FD/E6/MAP/17) and fixing newtop made of pre-laminated particle board 18 mm thick, exterior grade with natural teak shade on one side and white shade on the other sideof approved quality. Border with 4mm thick teak wood beading all around the top duly french polished as specified in the drawing and as directed. |
| 32 | Repairing ofteapoy verandah MAP (FD/E6/MAP/17) and preparing the surfaces by removing rust and cleaning with sand paper and applying two coats of synthetic enamel spray painting, black colour, complete all as specified in the drawing and as directed. |
| 33 | Renewal of top of table bed side(FD/E6/Map/15 (R)with prelaminated particle board of size 450x450mm 19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edgingalroundall as specified in the drawing and as directed. |
| 34 | Renewal of upper drawer of table bed side (FD/E6/Map/15 (R)of size 450x100x19 with prelaminated particle board,BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edgingalround all as specified in the drawing and as directed. |
| 35 | Renewal of bottom drawer of table bed side (FD/E6/Map/15 (R))of size 450x350x19 with prelaminated particle board, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edgingalroundall as shown on drawings. |
| 36 | Renewal of Handle for drawer of table bed side (FD/E6/Map/15 (R)) with handle 100mm chromium plated and all as specified in the drawing and as directed. |
| 37 | Renewal oftopof Table 3 \"x 2\" steel with drawer (FD-1008) with pre-laminated particle board 18 mm thick, exterior grade with natural teak shade on one side and white shade on the other side of approved quality. Border with 4mm thick teak wood beading all around the top duly french polished as specified in the drawing and as directed. |
| 38 | Repair and maintenance of Bed plywood top (FD-246) and renewal ofplywood topwith Plywood 12mm thick BWR quality, IS grade of size 1860mm x 900mm including fixing of 4 Nos MS Clamp 6mm thick of suitable size between horizontal members and legs all as specified in the drawing and as directed. |
| 39 | Renewal of Head board of Bed plywood top with both sides teak veneered plywood and teak woodlipping 4mm alround of size 900mm x 450mm all as specified in the drawing and as directed. |
| 40 | Renewal of Foot board of Bed plywood topwith both sides teak veneered plywood and teak wood lipping 4mm alround of size 900mm x 300mm all as specified in the drawing and as directed. |
| 41 | Renewal ofbottom stiffeners ofBed plywood top (FD-246) with 1st Class Hardwood all as specified in the drawing and as directed. |
| 42 | Renewal of teakwood arms of Chair Writing (FD-20/250/280) all as specified in the drawing and as directed. |
| 43 | Renewal of teakwood stiffeners of Chair Writing Chair Writing (FD-20/250/280)all as specified in the drawing and as directed. |
| 44 | Renewal of teakwood front legs of Chair Writing Chair Writing (FD-20/250/280)all as specified in the drawing and as directed. |
| 45 | Renewal of teakwood rear legs of Chair Writing Chair Writing (FD-20/250/280)all as specified in the drawing and as directed. |
| 46 | Renewal of teakwood rails (front, back & sides) of Chair Writing Chair Writing (FD-20/250/280)all as specified in the drawing and as directed. |
| 47 | Renewal of teakwood front legs of Chair Dining (FD-228/279)all as specified in the drawing and as directed. |
| 48 | Renewal of teakwood rear legs of Chair Dining (FD-228/279))all as specified in the drawing and as directed. |
| 49 | Renewal of teakwood rails (front, back & sides) of Chair Dining (FD-228/279) all as specified in the drawing and as directed. |
| 50 | Renewal of teakwood stiffeners of Chair Dining (FD-228/279) all as specified in the drawing and as directed. |
| 51 | Repair ofChair DiningOfficers (FD/E6/MAP/10, FD/E6/MAP/16, FD/MAP-II/04) and removal of oldunserviceable fabric and cushionand providing new fabric of approved quality, design and colour costing not less than Rs.350 per metre with cushion 75 mm thick 32 density provied tothe existing shapecomplete all as specified in the drawing and as directed. |
| 52 | Renewal of teakwood front legs of Chair diningOfficersall as specified in the drawing and as directed. |
| 53 | Renewal of teakwood rear legs of Chair diningOfficers all as specified in the drawing and as directed. |
| 54 | Renewal of teakwood rails (front, back & sides) of Chair diningOfficersall as specified in the drawing and as directed. |
| 55 | Renewal of teakwood bottom stiffeners of Chair dining Officersall as specified in the drawing and as directed. |
| 56 | Renewal of teakwood back stiffeners of Chair diningOfficersandall as specified in the drawing and as directed. |
| 57 | Renewal of teakwood rails (front, back & sides) of Chair Easy (FD-229/17(M))all as specified in the drawing and as directed. |
| 58 | Renewal of teakwood front legs of Chair Easy (FD-229/17(M))all as specified in the drawing and as directed. |
| 59 | Renewal of teakwood rear legs of Chair Easy (FD-229/17(M)) all as specified in the drawing and as directed. |
| 60 | Renewal of teakwood arms of Chair Easy (FD-229/17(M))all as specified in the drawing and as directed. |
| 61 | Removal of old and unserviceable fabric/Rexene and rubber foam etc.,of Sofa Set Five Seater (Trade Pattern) and providing new fabric/Rexene of approved quality, design and colour costing not less than Rs 380 per metre (approx. area 8 sqm),stitched to existing shape and design with 20 mm thick foam to arm rest and 100 mm thick PU foam of 40 density to rest of the areas, underneath of seat covered with approved black cloth and and carrying out necessary repair works if required and polishing the wooden parts with french polish completeall as specified in the drawing and as directed. |
| 62 | Removal of old and unserviceable foam cushion with cover from seat and back of Sofa set 5 Seater (FD 373/281) and providingnew foam cushionof size 550 x 530 x 100 mm , 40 Kg/cumdensity ,covered with tapestry cloth of best quality and colourcosting not less than Rs. 350 per metre, with zips of size 560mm long matching with colour of cloth complete all as specified in the drawing and as directed.Note:- Set of 10 Nos. i.e 5 nos seat and 5 nos back will be measured as one set. |
| 63 | Repair and maintenance ofSide board (FD-26(M)/241) and renewal of top of with pre-laminated particle board 18 mm thick, exterior grade with natural teak shade on one side and white shade on the other side of approved quality . Border with 4mm thick teak wood beading all aroundall as specified in the drawing and as directed. |
| 64 | Renewal of Door shutter of Side board (FD-26(M)/241) in two parts of size 655mm x 835mm made outof pre-laminated particle board 18 mm thick, exterior grade with natural teak shade on one side and white shade on the other side of approved quality . Border with 4mm thick teak wood beading all around including piano hinges, knobsetc all as specified in the drawing and as directed..Note:- Double leaf shutter will be measured as single unit. |
| 65 | Renewal of Side portion of Side board (FD-26(M)/241)withpre-laminated particle board of size 455mm x 625mm18 mm thick, exterior grade with natural teak shade on one side and white shade of approved quality on the other side. Border with 4mm thick teak wood beading all around all as specified in the drawing and as directed.. |
| 66 | Renewal of Back sideof Side board (FD-26(M)/241) with plywood of size 625mm x 1100mm using 6mm commercial plywood. |
| 67 | Renewal of Leg with Frame of Side board (FD-26(M)/241) of size 1050mm x 360mmwith teak wood scantling of size 25mm x 45mm alround with legs four Nos made out of teak wood of size 45mm x 45mm x 125mm on top and 25mm x 25mm x 125mm at bottom all as specified in the drawing and as directed.. |
| 68 | Renewal of drawersof Side board (FD-26(M)/241) with new Drawer alongwith with chromium plated knobs complete all as specified in the drawing and as directed. |
| 69 | Repair and maintenance of Table Dining 8 persons (FD-239/273) and renewal of top of Table Dining 8 persons (FD-239/273)with prelaminated particle board, 19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edgingalround all as specified in the drawing and as directed. |
| 70 | All as per item No 69.00 but of Table Dining 6 persons (FD-239/273) |
| 71 | Renewal of teakwood legsof Table Dining 6 to 8 persons (FD-239/273) all as specified in the drawing and as directed. |
| 72 | Renewal of teakwoodside railsof Table Dining 6 to 8 persons (FD-239/273) all as specified in the drawing and as directed. |
| 73 | Renewal of teakwoodfront / back railsof Table Dining 6 to 8 persons (FD-239/273)all as specified in the drawing and as directed. |
| 74 | Repair and maintenance of Table Dining 4 persons (FD-88) and renewal of top of with prelaminated particle board, 19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edgingalroundall as specified in the drawing and as directed. |
| 75 | Renewal of teakwood legsof Table Dining 4 persons (FD-88)all as shown on drawings. |
| 76 | Renewal of teakwoodrailsof Table Dining 4 persons (FD-88) all as specified in the drawing and as directed. |
| 77 | Renewal ofbroken mirror of Table dressing gents with mirror (FD 230) with new mirror of size 760 mm x 380 mm, 5 mm thick sheet glassduly electro-copper plated and polished, complete all as specified in the drawing and as directed. |
| 78 | Renewal of unserviceable broken back side ply of Table dressing gents with mirror (FD 230) with new back side ply of size 760 mm x 380 mm made of 6mm thick plywood, commercial type, complete all as specified in the drawing and as directed. |
| 79 | Renewal of unserviceable broken drawer of Table dressing gents with mirror (FD 230) with new drawerof size 290 mm x 130 mm made of 12 mm thick prelaminated particle board with teak finish lamination on one side and the other side balancing white lamination, exterior grade, ISI marked, duly providing 20 mm dia powder coated aluminium knob , complete all as specified in the drawing and as directed. |
| 80 | Removing unserviceable broken top/Bottom of Table dressing gents with mirror (FD 230) and provision of new top of size 900 mm x 300 mm made of 12 mm thick prelaminated particle board with teak finish lamination on one side and the other side balancing white lamination, exterior grade, ISI marked, duly fixed with 4 mm thick teak wood edging, complete all as specified in the drawing and as directed. |
| 81 | Renewal of unserviceable broken back board of Table dressing gents with mirror (FD 230) with new back board of size 900 mm x 120 mm made of 12 mm thick particle board, commercial type, exterior grade, ISI marked, duly fixed with 4 mm thick teak wood edging, completeall as specified in the drawing and as directed. |
| 82 | Renewal ofunserviceable and broken mirror of Table dressing ladies with mirror (FD 251) with new mirror of size 1220 mm x 366 mm, 5 mm thick sheet glassduly electro-copper plated and polished, completeall as specified in the drawing and as directed. |
| 83 | Renewal ofunserviceable broken top/Bottom of Table dressing ladies with mirror (FD 251) with new top of size 900 mm x 380 mm made ofpre-laminated particle board 18 mm thick, exterior grade, ISI marked, with natural teak shade on one side and white shade on the other side of approved quality, duly fixed with 4 mm thick teak wood edging, completeall as specified in the drawing and as directed. |
| 84 | Removing unserviceable broken back side ply of Table dressing ladies with mirror (FD 251) and provision of new back side ply of size 1220 mm x 366 mm made of 6 mm thick plywood, commercial type, complete all as specified in the drawing and as directed. |
| 85 | Removing the unserviceable and broken glass shutter complete with alround aluminium double channel of Table dressing ladies with mirror (FD 251) and provision of new glass shutter with aluminium double channel, complete all as specified in the drawing and as directed. |
| 86 | Removing unserviceable broken back board of Table dressing ladies with mirror (FD 251) and provision of new back board of size 900 mm x 380 mm made of 12 mm thick particle board, commercial type, exterior grade, ISI marked, duly fixed with 4 mm thick teak wood edging, complete all as shown in drawing and all as specified and directed. |
| 87 | Removing unserviceable broken drawer of Table dressing ladies with mirror (FD 251) and provision of new drawerof size 290 mm x 130 mm made ofpre-laminated particle board 18 mm thick, exterior grade, ISI marked, with natural teak shade on one side and white shade on the other side of approved quality,duly providing 20 mm dia powder coated aluminium knob , complete all as specified in the drawing and as directed. |
| 88 | Repair ofTable centre (FD-29(M)/235/274) and renewal of top with prelaminated particle board, 19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edgingalroundall as specified in the drawing and as directed. |
| 89 | Renewal of teakwoodside railsof Table centre (FD-29(M)/235/274) all as specified in the drawing and as directed. |
| 90 | Renewal of teakwood legsof Table centre (FD-29(M)/235/274)all as specified in the drawing and as directed. |
| 91 | Renewal of teakwoodfront / back railsof Table centre (FD-29(M)/235/274)all as specified in the drawing and as directed. |
| 92 | Renewal oftop of Table 900 x 600 mm with or without drawers (FD-231/284/41/224)with prelaminated particle board, 19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edgingalround all as shown on drawings. |
| 93 | Renewal of teakwood legs of Table 900 x 600 mm with or without drawers (FD-231/ 284/41/224)all as specified in the drawing and as directed. |
| 94 | Renewal of teakwood side rails of Table 900 x 600 mm with or without drawers (FD-231/ 284/41/224) all as specified in the drawing and as directed. |
| 95 | Renewal of teakwood horizontal/vertical stiffeners of Table 900 x 600 mm with or without drawers (FD-231/ 284/41/224) all as specified in the drawing and as directed. |
| 96 | Renewal ofFront drawer of Table 900 x 600 mm withdrawers (FD-231/ 284/41/224)with 12 mm thick commercial plywood and laminated with 1 mm thick decolam sheet (natural teak finish) on front exposed side of the drawerand fixing of drawer knobs, 40 mm round, chromium plated or brass coated, natural teak colour all as specified in the drawing and as directed. |
| 97 | Repair of Peg Table (FD-236/25(M)/277)and renewal of top ofwith prelaminated particle board, 19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edgingalroundall as specified in the drawing and as directed. |
| 98 | Renewal of teakwoodfront / back railsof Peg Table (FD-236/25(M)/277) all as specified in the drawing and as directed. |
| 99 | Renewal of teakwoodside railsof Peg Table(FD-236/25(M)/277) all as specified in the drawing and as directed. |
| 100 | Renewal of teakwood legsof Peg Table (FD-236/25(M)/277) all as specified in the drawing and as directed. |
| 101 | Repair ofTABLE BED SIDE (FD-276) and renewal of top ofwith prelaminated particle board of size 450mm x 230mm, 19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edgingalroundall as specified in the drawing and as directed. |
| 102 | Renewal of side of TABLE BED SIDE (FD-276)with prelaminated particle board of size 230mm x 510mm,18mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edgingalroundall as specified in the drawing and as directed. |
| 103 | Renewal of back side of TABLE BED SIDE (FD-276)with plywood6mm thick commercial of size 450mm x 410m all as specified in the drawing and as directed. |
| 104 | Renewal of shelf of TABLE BED SIDE (FD-276)with 12mm thick prelaminated particle board of size 450mm x 230mmwith natural teak shade on one side and white shade on the other side along with 4mm thick teak wood beading on the front side all as specified in the drawing and as directed. |
| 105 | Repair of Table writing(FD-249/275) and renewal of top oftop with prelaminated particle board, 19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edgingalround all as specified in the drawing and as directed. |
| 106 | Renewal ofFront drawer of Table writing(FD-249/275) with 12 mm thick commercial plywood and laminated with 1mm thick decolam sheet (natural teak finish) on front exposed side of the drawer and fixing drawer knobs, 40 mm round, chromium plated or brass coated, natural teak colour all as specified in the drawing and as directed. |
| 107 | Renewal oflegs ofTable writing(FD-249/275) with teakwood ofsize 55mm x 35mm x 760mm longall as specified in the drawing and as directed. |
| 108 | Renewal ofhorizontal stiffeners of Table writing(FD-249/275) with teakwood of size 50mm x 25mm x 1145mm all as specified in the drawing and as directed. |
| 109 | Renewal ofbottom shutters of Table writing(FD-249/275) with prelaminated particle board ofsize 370mm x 470mm , 18 mm thick, exterior grade, of natural teak finish with 4 mm thick teak wood edgingalround all as specified in the drawing and as directed. |
| 110 | Renewal ofback sideof Table writing(FD-249/275) withplywood 6mm thick commercial grade of size 410mm x 610mm all as specified in the drawing and as directed. |
| 111 | Repair of Teapoy (FD-278) and renewal of top of with prelaminated particle board, 19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edgingalround all as specified in the drawing and as directed. |
| 112 | Renewal ofside railsof Teapoy (FD-278) with teakwood of size all as specified in the drawing and as directed. |
| 113 | Renewal offront / back railsof Teapoy (FD-278) with teakwood of size all as specified in the drawing and as directed. |
| 114 | Renewal oflegsof Teapoy (FD-278) with teakwood of sizeall as specified in the drawing and as directed. |
| 115 | Preparation of old wooden surfaces ofBedplywood top (FD-246) with suitable abrasive paper, removing dust, dirt, filling the chipped and loose holes with bees wax, including cleaning / scrapping off, carrying out necessary repair works,providing with suitable nylone buffers for the legs and applying French polish two or more coats (till the desired finish quality is achieved), complete all as specified in the drawing and as directed. |
| 116 | All as per item No 115.00 but ofChair Writing (FD 20, 280) |
| 117 | All as per item No 115.00 but ofChair Dining FD-16,279) |
| 118 | All as per item No 115.00 but ofChair DiningOfficers (FD/E6/MAP/10, FD/E6/MAP/16, FD/MAP-II/04) |
| 119 | All as per item No 115.00 but ofChair Easy (FD 229) |
| 120 | All as per item No 115.00but ofSofa set 5 seater (FD 373/281) |
| 121 | All as per item No 115.00 but ofSide board (FD-26(M)/241) |
| 122 | All as per item No 115.00 but ofTable dining 8 person (FD-239/273) |
| 123 | All as per item No 115.00 Table dining 6 person (FD-239/273) |
| 124 | All as per item No 115.00 but of Table dining 4 person (FD-88) |
| 125 | All as per item No 115.00 but of Table dressing gents with mirror(FD-230) |
| 126 | All as per item No 115.00 but ofTable dressing ladies with mirror (FD-251/378) |
| 127 | All as per item No 115.00 but ofTable centre (FD-29(M)/235/274) |
| 128 | All as per item No 115.00 but ofTable 900x600 w/o drawer (FD-284) |
| 129 | All as per item No 115.00 but ofTable 900x600 with drawer (FD-41/224) |
| 130 | All as per item No 115.00 but ofPeg Table (FD-25(M)/236/277) |
| 131 | All as per item No 115.00 but ofTable bed side (FD-28/276) |
| 132 | All as per item No 115.00 but ofTable writing FD 275/249 |
| 133 | All as per item No 115.00 but ofTeapoy (FD-278) |
| 134 | Removing the unserviceable cane plastic from vartious types of CHAIRS (FD 20/280/16/279/229) cleaning the rebated portion and smoothening with emery paper, carrying out necessary repair works andre-caning with plastic cane, white colour, 0.40 mm thick and 1.80 mm width for weaving and 2.80 mm width for borders, of approved make, completeall as specified in the drawing and as directed. |
| 135 | Removing existing unserviceable plastic cane from Chair verandah and preparing the surfaces with abrasive (emery) paper, re-caning with plastic cane, 0.40 mm thick and 3.80 mm width, of approved make and quality, including painting the frame with two coats of synthetic enamel paint white colour and providing PVC/ rubber shoe / bush to legs etc complete all as specified in the drawing and as directed. |
| 136 | Fixing of \"L\" Clamp 4mm thick made of made of GI / MSof suitable with wood screws size between horizontal members and legs of various types of wooden chairs, teapoy, table centre, table 900mm x 600mm with or without drawer etc all as specifiedand as directed by the engineer-in-charge. |
| 137 | Fixing of \"L\" Clamp 6mmthick made of made of GI /MS of suitable size with wood screws between horizontal members and legs ofsofa set 5 seater (FD-281/373),Table dining 6 to 8 person (FD-239/273), Table dinming 4 person (FD-88), Table writing (FD-249/275) etcall as specifiedand as directed by the engineer-in-charge. |
