Tender For Repair And Re-Carpeting Road Of Switchyard Area Upto Power House Intake And Bhopal Approach Road Under Indira Sagar Power Station, Narmada Nagar, Distt. Khandwa (M.P.)., Sagar-Madhya Pradesh
TDR : 52565185
Tender Notice
BOQ
Expired
Sagar
Madhya Pradesh
Tender For Repair And Re-Carpeting Road Of Switchyard Area Upto Power House Intake And Bhopal Approach Road Under Indira Sagar Power Station, Narmada Nagar, Distt. Khandwa (M.P.).
Name of Work: Repair and re-carpeting road of Switchyard area upto Power House Intake & Bhopal approach road under Indira Sagar Power Station, Narmada Nagar, Distt. Khandwa (M.P.).
Sl. No.
Item Description
1
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead up to 1000 meters.
2
Providing and applying tack coat with low viscosity bitumen of VG 10 grade using bitumen pressure sprayer on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications. (i) @ 0.25 kg per sqm (normal bituminous surfaces)
3
Providing and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with Electronic Sensor paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction and as a) Using Batch Mix Plant of appropriate capacity and Hydraustatic Paver finisher with Sensor. for Grading II (19 mm nominal size) bitumen content 3.5% with bitumen 60/70 (VG 30)
4
Close Graded Premix Surfacing/Mixed Seal Surfacing (Mechanical means using HMP of appropriate capacity not less than 75 tones /hour.) Type BProviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) or 13.2 mm to 0.09 mm (Type-B) aggregates using penetration grade bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity & finishing to required level and grade all complete as per clause 508 of specifications.with 60/70 butumen (VG-30)
5
Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beeds on Bituminous surface.Providing and applying (Cleaning of Bituminous surface) thermoplastic compound having composition of binder (Resin) minimum 18 %, titanium dioxide minimum 10 % and intermixed glass beed, minimum 30% of brand like Asian, Burger or equivalent make of 2.5 mm thick including drop down reflectorizing, glass beeds @ 250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beeds as per IRC:35.The finished surface to be level, uniform and free from streaks and holes, all complete as per clause 803 of specifications. Note: - The guarantee of Thermoplastic should be minimum 3 Years.
6
Deduction for not using Electronic Sensor Paver for the relevant item
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
