|
| 1 | Dismantling of brick work built in cement mortarincluding all quoins,pillars etc but excl ashlar facing,dressed work and precast concrete complete all as specified and directed by Engr-in-Charge. |
| 2 | Taking down cement plasterincluding raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified and directed by Engr-in-Charge. |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L forbrick work with Sub class \"B\"bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L for 15mm thick rendering in cement mortar(1:4) finished even & smooth without using extra cement on brick/concrete surfaces complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for applyingtwo coats of weather proof exterior emulsion paint over priming coat of exterior primer on new or untreated plastered surfacesusing brush for priming coat and 1st coat and 2nd/ final coat with Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressurecomplete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for framed work such as gate(any size), grills,gratings,etc with ends of bars shouldered and/or riveted,or forged into spikes framed guard bars barred iron doors ladders framed balusters,walk ways,railing,framework of water tank,Y-shape angle iron and similar work con-forming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for preparation of old steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 10 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engr-in-Charge. |
| 11 | S&F of pre-painted galvalume aluminium sheet zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L for 20 mm thick granite ( of any type ) work (table rounded and polished) in steps, coloumn,jambs, brick pillars, window-cills, cooking platforms and like in 15mm thick cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixer of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge. |
| 13 | S&F in repair concertina coil with punched tape concertina coil 600mm dia 10 mtr openable length having 50 Nos rounds per 6 mtr length, spring core wire (2.5mm thick) of high tensile strength of 165kg/Sqmm with tape (0.52 mm thick and weight 43.478 gm/metre and fixing the same with Y- shape angle iron with 06 horizontal R.B.T (Reinforced Barbed Tape) wire, stud tied with GI staple and GI clips to retain horizontal complete all as specified and directed by Engr-in-Charge. |
| 14 | Dismantaling bricks (laid flat or on edge) or brick tiles in floor, interlocking tiles, kerbs aprons,etc (each layer) description or thickness in floor and disposing the rubbish out of Defence land complete all as specified and directed by Engr-in-Charge. |
| 15 | Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish out of Defence land complete all as specified and directed by Engr-in-Charge. |
| 16 | M&L for 75 mm thick cement concrete type D-2 1:4:8 ( 40mm graded aggregate) as in sub basecomplete all as specified and directed by Engr-in-Charge. |
| 17 | M&L for 75 mm thick cement concrete type C-2 1:3:6 ( 40mm graded aggregate) as in plinth protection and mass concrete complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L for machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade fixed with grey cement and pigment complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L for machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade fixed with grey cement and no pigment but except tiles complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L for sand filling under floors or in foundations,watering and consolidation complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L for preparation of new or previously untreated surface of any description over 10cm girth or width, and applying two coats of synthetic enamel paint over a coat of priming paints over brick/concrete surfaces not otherwise described complete all as specified and directed by Engr-in-Charge. |
| 22 | M&L for preparation of old or previously untreated surface of any description over 10cm girth or width, and applying two coats of synthetic enamel paint over a coat of priming paints over brick/concrete surfaces not otherwise described complete all as specified and directed by Engr-in-Charge. |
| 23 | M&L for concrete glossychequered tile 30cm x 30cm x 25mm thick, with grey pigment cement and pigments set jointed and pointed in neat cement slurry in floors, over 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. |
| 24 | M& L for PCC 1:2:4 type B-1 (using 20 mm graded agg) in kerbs , rounded or chamfered on edges including necessary form work complete all as specified and directed by Engr-in-Charge. |
