|
| 1 | Taking down of existing Water Proofing treatment of any type (APP Membrane,Cement or earthen tile,Mud phuska or lime concrete) including cement plaster of any thickness and removing bitumen coating/mud pushka dirts etc over original RCC roof slab to providing water prooling treatment complete all as specified & directedNote : Quoted Rate deemed to be includedfor removing debris outside defence land exc 500m but n.exc 1000m |
| 2 | M & L for demolition & removal of cement concrete/padding concrete of any description and in anypositionnot otherwise specifically provided for complete all as specified and as directedNote : Quoted Rate deemed to be includedfor removing debris outside defence land exc 500m but n.exc 1000m |
| 3 | M&L forPlain cement concrete (1:2:4) type B-0 using 12.50mm graded stone aggregate as in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating with necessary formworkcomplete all as specified and as directed. |
| 4 | M & L forwater proofing treatment over RCC roof slab with following specification complete all as specified & directed :-(i)Removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth (ii) Screed bed/rendering 10mm thick in cement mortar (1:3) mixed with and including liquidwater proofing compound as per manufacturers instructions(iii) Applying compatible primer/bonding bitumen @ 0.40 Litre/Sq m (iv) Applying APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.80kg/Sq m reinforced with non woven polyster/HMHDPE matt black finished overand torch applications of membrane with 75mm side overlap and 100mm end lap (v) Applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sq m |
| 5 | Disconnecting existing water tanksexc 250litres & not exc 500 litres capacity, setting aside including necessary connections (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified & directed.(Note : Cleaning repairing etc. measured & paid separately) |
| 6 | Disconnecting existing water tanksexc 500 litres & not exc 1000 litres capacity, setting aside including necessary connections (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified & directed.(Note : Cleaning repairing etc. measured & paid separately) |
| 7 | Taking down cement plaster of any description including racking out joints, hacking for key and disposal of debris to out side MD land all as specified and as directed. |
| 8 | M&L for Rendering 15mm thickcement mortar (1:6) on brick or concrete surfacesfinished even and smooth without using extra cement all as specified and as directed. |
| 9 | M&L for rendering 15 mm thickcement mortar(1:4) on other than fair faces of brick work or concrete surfacesmixedwith WPC,finished plastered surface even and smooth without using extra cement all as specified and as directed.(Note :- WPC will be measured and paid separately) |
| 10 | Supply only liquid water proofing compound, ISI marked, complete all specified and as directed. |
| 11 | M&L for Rendering 5 mm thick cement mortar (1:3) on ceiling surfaces finished even and smooth without using extra cementcomplete all specified and as directed. |
| 12 | M&L for Preparation of new plastered ceiling surfaces and applying three coats ofwhite wash etc complete all specified and as directed. |
| 13 | M&L for Preparation of newly plastered wall surfaces narrow widths/ bands etcand applying twocoats of cement base paint over one coat of primer complete all specified and as directed. |
| 14 | M&L forPreparation of newly plastered wall surfaces and applying two coats of Acrylic emulsion distemper overone coat ofprimer etc complete all as specified and as directed. |
| 15 | M&L for Plaincement concrete ( 1:5:10) type E-2using 40mm graded stone aggregateinfoundations, filling and mass concrete for sunken floor including demolition of existing cement concrete complete all as specified and as directed. |
| 16 | M & L for water proofing to sunken portions of WCs, bathroom and kitchen etc by applying water based, cold applied, single component, elastomeric in-situ seamless monolithic coating ready to use acrylic modified bituminous liquid membrance with the procedure in sequence all as specified and as directed.SURFACE PREPARATION (i) Removing all loose gravel, dirt, oil, grease and foreign matter by jet of dry air andcleaning the surface mechanically or by grinding to make it smooth before application. (ii) Repairing all cracks by cutting “V” groove and fill with PMC mortar prepared in theratio of Shalicrete : cement : sand = 1:2:5or equivalent. (iii) Providing 50 mm x 50 mm coving made out of PMCmortar as above.MATERIAL PREPARATION (i) Stir TarFelt® LM or equivalent by a slow speed mixture (approx. 400 rpm) fitted witha suitable mixing paddle to ensure a homogenous mix. (ii) After stirring, wait for the product to settle in order to let entrapped air escape. |
| 17 | WATERPROOFING APPLICATION(i) Slightly damp the surface. Avoid standing water / ponding.(ii) Prime the surface with a mixture of TarFelt® LM or equivalent and potable water inthe ratio of 50:50 and apply @400 grm / m2 of the mixture and allow it to touch dry.(iii) Apply first coat of TarFwlt® LM @ 0.70 kg / m2 by brush / roller / airless spray whilethe primed surface is tracky, For faster and smoother application, airless spray is preferred.(iv) Spread fiber glass net of 45 gsm with overlap of 50 mm in both directions when thesurface is till tackty.(v) Allow 1st coat to dry for 10-12 hrs.(vi) Apply second coat of TarFelt® LM @ 0.70 kg m2 by brush / roller / airless spray forfinal DFT of 1000 micron in two coats inclusive of fibre glass of 45 gsm (theoreticalcoverage depending on surface conditions).(vii) Sprinkle sand @ 200 grm / m2 over the final vertical coating when the surface is stilltackty to facilitate plastering.(viii) Ensure final curing time of 36 hrs before allowing / carrying out any further work.(ix) Conduct ponding test after 7 days of curing at ambient temperature. |
| 18 | Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm and Re-fixing in same opening complete all as specified and directed |
| 19 | Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed |
| 20 | Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3and finish to match with adjoining surfaces all as specified and directed |
| 21 | Taking down chowkat (without taking of shutter from the frame) of area exc 1.5sqm but not exc 4 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3and finish to match with adjoining surfaces all as specified and directed |
| 22 | Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each all as specified and as directed |
| 23 | M & L for Solid PVC door frame (Single rebated) of size 60 mm x 30 mm made out of solid foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 24 | M & L for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPSsupplying & fixing in frame at site as per specification and directed |
| 25 | M & L for Factory Made Solid Panel PVC Door Shutter30mm thick stiles, consisting of frame made of M.S tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with stuck with solvent bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,supplying & fixing in frame at siteall as specified and as directed |
| 26 | S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, frame rebeated on the solid, rounded or chamfered, put tegether with glue pinned at joints etc complete all as specified and as directed |
| 27 | S&FPressed steel frames made of 1.25mm thick MS sheet of profile 105mm x 60mmfor door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified. |
| 28 | S&FPressed steel frames made of 1.25mm thick MS sheet of profile 105mm x 60mmfor door and window frames with one or more rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified. |
| 29 | S&FFlush door shutters 35mm thick, factory made as per IS:2202 (Part-I 1999) solid core construction, with block board core with decorative face veneer both faces with lipping/frame to match, fixed to chowkhats all as speified and directed |
| 30 | S&Fsecond class hard wood 35 mm thick glazed and skeleton shuttersopen rebated and prepared to receive glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as specified in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and as directed (Note: Supply & fixing of 4 mm thick sheet glass &wire mesh be measured and paid separately). |
| 31 | S & F Plain framed, panelled shutter (two panel) of 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm venereed particle board with commercial veneering on both faces, rail and style are ofsecond class hardwood & the size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treateds fixed to chowkhat all as specified and as directed. |
| 32 | S&F for Mild steel work as in hold fast, Bands, straps, supports or staysfor rainwater made with flat ironconforming to Fe-290 Gde-E-165 all as specified & directed |
| 33 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed |
| 34 | M & L for Powder coated aluminium (minimum thickness of powder coating 50 micron)shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete all as specified & directed.(Note: Supply & fixing of 4 mm thick sheet glass or wire mesh be measured and paid separately). |
| 35 | S&FPowder coated (of any shade/colour as approved by GE ) Aluminum ventilators of size 500mm x 850 mm, with adjustable 4mm thick figured glass louvers, fixed in half portion, without sash bars, aluminum section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, including stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed. |
| 36 | M & L for powder coatedaluminium grill ( powder coated or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, weight not less than 2.507kg/sqm,including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement all as specified and as directed. |
| 37 | S&F Box type Steel Windows/Ventilators double side shutters (Windows side hung type , Ventilators top hung)pressed steel frames made out CRC Sheet of 80mm x 60mm x 1.25mm double rebated, Shutters box type made out of CRC Sheet of 40mm x 20mm x 1.0mm , windows & ventilator shutter fixed made of glass andgauge fixed with box type hinges, Aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, Telescopic stays, including 12mm square guard bars / grill welded with steel frame (100c/c horizontically) etc complete all as specified and directed.(NOTE: (i) Quoted rate deemed to be included steel frames, steel shutters, Guard bard/Grill, beading, fittings such as handles,hinges,Telescopic stays, locking arrangements and fixing of glass and wiremesh etc. (ii) Supply & fixing of 4 mm thick sheet glass or wire mesh be measured and paid separately. (Note : All Windows/Vent design as per CECZ TD drg No 539) |
| 38 | M & L for plain cement concrete (1:3:6) type C0using 12.50mm grade stone aggregatefor filling of steel door frame/box type steel window/vent complete all as specified and directed. |
| 39 | Supply & fix Sheet glass 4mm thick ordinary quality and glazing with oil putty or in wooden /steel /aluminium /rubber beading in square not exceeding 0.5 Sqm in each pane and all as specified. |
| 40 | Supply & fix Sheet glass 4mm thick ordinary quality and glazing with oil or in wooden /steel /aluminium /rubber beadingputty in square exceeding 0.5 Sqm in each pane and all as specified. |
| 41 | Supply & fix stainless steel wire cloth 0.36mm nominaldia and average width of aperture 1.40mm and fixed with tinned tack or galvanized wire staple all as directed fixed. |
| 42 | Dismantling of structural steel work including doors, gates but excluding framed truss etcall as specified & directed |
| 43 | S&FMild steelframed work as in doors or gates of angle or other sections with gusset plates, rails braces, etc complete drilled for fixing of steel sheeting or other covering, doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging ; also fastening and fixing complete including painted with one shop coat of zinc chromate primer paint (including preparation of surface) at contractors workshop/factory before fabrication complete all as specied and directed |
| 44 | S & F Mild steel, plain, black sheet 1.25 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specied and directed |
| 45 | M&L for Preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed |
| 46 | M & L for Preparing new steel or iron surfacesof any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 47 | S & F Butt hinges 100mm size,stainless steel, fixedto door frame and shutterduly welded/screwed complete all as specified and as directed |
| 48 | S & F Butt hinges 100mm size medium weight, cold rolled mild steeland fixedto door frame and shutterduly welded/screwed complete all as specified and as directed |
| 49 | S&F Aluminium anodised towerbolt 150mm long of extruded section etc complete all as specified and as directed |
| 50 | S&F Aluminium anodised towerbolt 200 mm long of extruded section etc complete all as specified and as directed |
| 51 | S&FAluminium handle 125 mm size, cast type, anodised etc complete all as specified and as directed |
| 52 | S&FAluminium handle150 mm long, cast type, anodised etc complete all as specified and as directed |
| 53 | S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed |
| 54 | S & FFloor door stopper of aluminium alloy powder coated, with hard down steel spring 140 mm long cover plateall as specified and as directed. |
| 55 | S&F Mild steel 300mm long ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed. |
| 56 | S&F Rubber door buffer 125mm size fixed with brass screws complete all as specified and directed |
| 57 | S&F Eye doors viewer(Magic eye) made of stainless steel complete all as specified and directed |
| 58 | M & L forFigured glass4 mm thick, pin head type and glazing with oil putty/wooden or steel beading in squares not exc 0.5 Sqm in each paneincluding hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed. |
| 59 | M&L forSheet glass 3mm thick, ordinary quality and glazing withoil putty / wooden or steel beading in squares not exc 0.5 sqm in each pane including hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed. |
| 60 | S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm fixed with MS screw or nut bolts with or without wooden or steel beading all as specified and as directed. |
| 61 | S & F in repairs Aluminium anodised barrel towel bolts 150 mm long of extruded section all as specified and as directed. |
| 62 | S & F in repairsAluminium anodised barrel towel bolts 200 mm long of extruded section all as specified and as directed. |
| 63 | S & F in repairs Aluminium alloy anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections all as specified and as directed. |
| 64 | S & F in repairs Extruded alloy handles 125 mm size fabricated type anodisedall as specified and as directed. |
| 65 | S & F in repairs Extruded alloy handles 150mm size fabricated type anodised all as specified and as directed. |
| 66 | S&F in repairs Butt hinges 100mm size,medium weight cold rolled mild steelall as specified and as directed. |
| 67 | S&F in repairs stainless steel decorative curtain rod of 20 mm bore with wood finishes (weight not less 300 gms per running meter) includingfancy finale caps cap etc complete all as specified and as directed |
| 68 | S&F in repairs Bracket for curtain rod of dia 20 mm dia, made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long incl wooden base etc complete etc complete all as specified and as directed |
| 69 | S&FAluminium snap grid frame work of grid size 605 x 605mm for false ceiling including Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium frame work with screws including taking down old ceiling of any description complete all as specified and directed. |
| 70 | S&FPre- painted galvalume sheets aluminum zinc coating,150AZ,GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet of any type and any thickness complete all as specified and directed. |
| 71 | S&F Pre-painted galvalume aluminum zinc coating, 150AZ,GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet of any type and any thickness complete all as specified and directed. |
| 72 | M & L forGranite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite ,including cutting and polishing laid on screed bed 15 mm thick cement mortar (1:4) set and jointed including dismantling of old stone slabs laid bedded and pointed in any mortar complete all as specified |
| 73 | M & L for Providing edge moulding to 18-20mm thick granite stone any description of counters vanitiesetc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed |
| 74 | S & F in repairs kitchen sink with drainage board made of stainless steel 1mm thick kitchen or laborotry with plugs, washers and wastes including bedding in mortar on to dwarf wall or including fixing cantilever brackets and connecting union pipes, overall size 915x460mm, bowl size 410x330x160mm complete all as specified and as directed |
| 75 | S&F in repairs sinks made of stainless steel lmmthickkitchenorlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm,bowl size 410mm x 330mm x 160mm complete all as specified and as directed |
| 76 | S & F in repairs stainless steel plate rack fabricated with 0.63mm thick sheet, overall size 800mm x 600mm complete all as specified and as directed |
| 77 | S&F in repairs Vitreous China wash basin, white, flat back, size550x400mm including brackets with cutting for and pinning in ends of brackets or erecting stand with following accessories complete all as specified and directed :-(i)Brass CP waste coupling 32 mm dia (ii) Pillar taps, chromium plated brass fancy type, fitted to pipe 15mm dia(iii) waste pipe 600 mm long (iv) PVC connection 15mm dia 600mm long with PTMT nuts |
| 78 | S&F in repair Vitreous china wash down water closet pan (pedestral Pattern)white,including connection to drain or out going pipe and to flushing pipe, anti syphonage pipewith following accessories complete all as specified and directed :-(i)PVC valveless, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle including brackets(ii) Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device(iii) PVC connection 15mm dia 600mm long with PTMT nuts |
| 79 | M & L for Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC (SWR) P trap including making good to floor, fixed in repairs with following accessories complete all as specified and directed :-(i)PVC valveless, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle including brackets(ii) PVC connection 15mm dia 600mm long with PTMT nuts |
| 80 | S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm (minimum), white, with grating and union for discharge pipe including following accessories complete all as specified and as directed :-(i) concussive push button taps of cast copper alloy,CPscrewed for iron pipe 15mm dia (ii) PTMT waste coupling (Minimum weight 32mm-45gms) (iii) Urinal spreader PTMT (iv)PVC connection 15mm dia 450 mm long with PTMT nuts (v)PVC urinal waste pipe |
| 81 | S&F in repairsFlushing cistern 10 ltrs capacity, PVC valveless, syphonic action type, low level, white colour, with inlet, ball valve, float and handle including brackets, flush pipe of polythelene of low or high density 32mm dia comlplete all as specified and directed. |
| 82 | S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified and directed. |
| 83 | S&F in repairswall mixer for mixing hot and cold water, Brass chromium plated, screwed down for iron pipe 15mm dia bore and fixed complete all as specified and directed. |
| 84 | S&F in repairs Pillar taps, fancy type, cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered `Hot\"or `Cold\"with long screwd shanks and fly-nuts, screwed for iron pipe 15mm dia bore and fixed complete all as specified and directed. |
| 85 | S&Fin repairsstop valves/ angle valves cast copper alloy, screwed down, high pressure, fancy type,chromium plated screwed both ends for iron pipe 15mm dia bore or for unions and fixed complete all as specified and directed. |
| 86 | S&Fin repairs Stop valves cast copper alloy, screwed down, high pressure, fancy type, chromium platedwith long shankandcup (concealed type) screwed both ends for iron pipe 15mm dia bore or for unions and fixed all as specified and directed. |
| 87 | S&Fin repairs Bib tapstandard,chromium plated fancy type, high pressure screwed for iron pipe 15mm dia bore and fixed all as specified and directed. |
| 88 | S&Fin repairs Bib cock two way with angle valve combination brass chromium plated, screwed for iron pipe 15mm dia bore all as specified and directed. |
| 89 | S & F in repairs Bib tap, long body brass chromium plated with CP flange,screwed for iron pipe 15mm dia boreall as specified and as directed. |
| 90 | S & F in repairsHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positioncomplete all as specified & directed. |
| 91 | S&F in repairs basin mixerfor mixing hot & cold water, Brass chromium plated, screwed down for iron pipe 15mm dia and fixed complete all as specified & directed. |
| 92 | S&F in repairs shower rose with swivel joints, 125mm dia, brass chromium plated fixed to 15mm dia bore complete all as specified & directed. |
| 93 | S&F in repairs concussive push button tapsof cast copper alloy, fixed to 15mm diapipe complete all as specified & directed. |
| 94 | M&L in repairs waste pipe40mm dia, 800mm long, corrugatedcomplete all as specified and as directed. |
| 95 | M&L in repairswaste pipe32mm dia, 800mm long corrugated waste pipe complete all as specified and as directed. |
| 96 | S&F in repair Bib tap PTMT fancy type any colour screwed for iron pipe 15mm dia all as specified and as directed. |
| 97 | S&F in repairs Pillar tap PTMT fancy type any colour screwed, for iron pipe 15mm dia and fixed all as specified and as directed. |
| 98 | S&F in repairs angle stop valve ofPTMT any colour pressed screwed, for iron pipe 15mm diaand fixed all as specified and as directed. |
| 99 | S & Fin repairsPVC cover suitable for PVC sintex tank 500/1000 litre capacity water tank complete all as specified and as directed. |
| 100 | S & F in repairs Towel rail stainless steel glossy finish complete all as specified and as directed. |
| 101 | S&F in repairs Soap dish chromium plated brass all as fixed as per manufacturers instruction all as specified and as directed. |
| 102 | S & F in repairsbevelled edge mirrorof size 600mmx450mm of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed |
| 103 | S&F in repairs PVC Mirror cabinet of size 400x500 mmcomplete all as specified and as directed. |
| 104 | S & F in repairs PVC connection (Suitable for Hot / Cold Water Supply) 15 mm size with PTMT nuts of length 450 mm,all as specified and as directed. |
| 105 | S & F in repairsPVC(SWR) floor trap, plain with grating including jointing with solvent cement, 75mm dia outlet all as specified and as directed. |
| 106 | S&F in repairs Toilet paper holder with flat recessed type, stainless steel Complete all as specified and directed. |
| 107 | M&L forwaste fittings 32 mm dia, brass chromium plated for sinks, basins, etc with long screwed shanks and fly nuts, flange end fixed in repair complete all as specified and as directed |
| 108 | M&L forwaste fittings 40mm, brasschromium plated for sinks etc with long screwed shanks and fly nuts, flange end fixed in repair complete all as specified and as directed |
| 109 | Supply & layingCPVC pipes 20 mm outer dia SDR 11 (Plain CPVC SDR 11 fittings) on walls / ceiling or laying in floors including all fittings and specials including taking down 15 mm GI tubing and connections complete all as specified & directed. |
| 110 | Supply & layingCPVC pipes 25 mm outer diaSDR 11 ( Plain CPVC SDR 11 fittings) on walls/ceiling or laying in floors including all fittings and specials including taking down 20 mm GI tubing and connections complete all as specified & directed. |
| 111 | S&F in repairsCPVC gate valveswith lever,screwed both ends for iron pipe 20mmand fixed complete all as specified & directed. |
| 112 | S&F in repairsCPVC gate valves with lever, screwed both ends for iron pipe 25mm, and fixed complete all as specified & directed. |
| 113 | M & L forrotational moulded, triple layer polythene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisting and fixed in positionon roofs includingball valve 20 mm dia and fittings includingdismantling existing water storage tank, complete all as specified & directed |
| 114 | M & L forrotational moulded, triple layer polythene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisting and fixed in positionon roofs includingball valve 25 mm dia and fittings includingdismantling existing water storage tank, complete all as specified & directed |
| 115 | S & F in repairsFloat valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe 20mm dia bore and fixed all as specified & directed.(Minimum weight 2 0 m m - 2 1 0 g m s ) all as specified and as directed. |
| 116 | S & F in repairsBall valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe 25mm dia bore and fixed all as specified and as directed.(Minimum weight 25mm-455gms)all as specified and as directed. |
| 117 | Demolition of cement concreteand paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 118 | M & L for Plain cement concrete (1:2:4) type B-0using 12.5 mm graded stone aggregate as in25mm thicklevelling concrete for floor all as specified and as directed. |
| 119 | Dismantling of floor, hearth or wall tilling including cement mortar bedding (but not backing) and removing rubbish off from premises all as specified and as directed. |
| 120 | M&L for Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer 15 mm thick cement mortar (1:4) for laying floor finishes all as specified and as directed. |
| 121 | M&L for Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer 15mm thick cement mortar (1:4) for laying floor finishes all as specified and as directed. |
| 122 | M&L for Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer of 15 mm thick in cement mortar (1:4) for laying floor finishes all as specified and as directed. |
| 123 | M & L for Glazed ceramic tiles in vertical surfaces 350 x 250x 7 mm/ 450 x 350 x 7 mm/ 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaceover & including backing coat 10mm thick cement mortar (1:4)onbrick work or concrete surfaces to receivewall tiles all as specified and as directed. |
| 124 | S & F in repairsPVC (SWR) pipes 75 mm dia boresingle socketed in any length with rubber ring joints fixed to walls including necessary fittings all as specified and as directed. |
| 125 | All as per item No. 124 herein before110 mm dia . |
| 126 | S&F in repairPVC (SWR) Bends 75mm dia with access door of any radius all as specified and as directed. |
| 127 | All as per item No. 126 herein before110 mm dia . |
| 128 | S&F in repairPVC (SWR) junction single(single T) equal or unequal 75mm dia with access door all as specified and as directed. |
| 129 | All as per item No. 128 herein before110 mm dia . |
