Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-12-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-12-2025 |
| Sl. No. | Item Description |
| 1 | Provn of rifile racks and personal lockers and allied works for guard rest rooms at various locationsat HQ SAC (U). |
| 2 | S&F MS lockers/Gun Storage Cabinet including rifle rack made from 16 guage powder coated MS galvanised steel sheet (Approx size - 48\" x 36\" x 18\") with approx weight of about 110-120 Kg per cabinet fitted to wall/floor with PCC & nuts/bolts embedded in wall/floor complete all as specified and as directed. Note i)The colour and size should be as specified and as approved by Engr-in-Charge. II) The compartment/Patition/Holding racks etc all as specified and shown on Drg attached. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed. |
| 4 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 5 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 6 | M&L for chequered cement concrete tiles 300x300x20mm thick set and jointed and pointed in neat cement slurry in floor with grey cement and no pigment complete all as specified and directed. |
| 7 | M&L for 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed. |
| 8 | M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 9 | M&L PCC 1:2:4 type B0 (12.5mm graded aggregate) 25mm thick as in floor subbase for receving of floor tiles complete all as specified and directed. |
| 10 | M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed |
| 11 | M&L for rendering 10mm thick on fair faces of brick work in CM 1:4 as backing coat to receive tiles complete all as specified and directed. |
| 12 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/blankets, any thickness, including any type frame work and cover fillets etc, complete all as specified and directed |
| 13 | M&L for false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595x595mm of approved texture, design and patterns, to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams per sqm per including both sides) comprising of main -T runners of size 24 x 38 mm of length 3000mm, cross -T of size 24x32mm length 1200mm and secondary intermediate cross -T of size 24x32mm of length 600mm to form grid moduled of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80grams per sqm) i.e. 12x50mm long dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm lenth and L-Shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25 mm flange to pierce into 12x50mm or even bigger size dash fasterner if require, fixed with galvanised iron perimeter wall angle or size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall S.S screws.With 15mm thick tegular/butt edged without perfoation plain/designer light weight calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles confirming to JIS-Z 2801 and ASTM G-21, complete all as specified and directed. |
| 14 | Taking down cement plaster including existing roof treatment or fillets on roof surfaces and wall surfaces complete, racking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance exc 250m and not exc 500m, complete all as specified and as directed. |
| 15 | Demolition ofCement Concrete of any description and in anyposition not otherwise specifically provided for complete all as specified and as directed. |
| 16 | M&L for 15 mm thick rendering in cement mortar 1:4 on fair surfaces of brick masonry or concrete surface, finished the surface even and smooth with using extra cement incl using WPC as per manufacturers instructions, complete all as specified and directed. Note : WPC shall be measured and paid separately. |
| 17 | Supply only liquid waterproofing compound (ISI grade only) |
| 18 | M&L PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in padding concrete for roof, plinth courses,haunching, string courses, water troughs and the like finished even and smooth including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 19 | Protection Screed - Horizontal:Fixing 3mm diameter, 50mm square weld mesh over the geo textile surface followed by providing and laying screed concrete of M20 grade of average 75mm thickness with a minimum thickness of 50mm at drain points anda slope of 1:150 or required as per the site condition at all levels by admixing necessary admixtures Conplast WL Xtra @ 200ml per bag of cement of Fosroc Chemicals or approved equivalent and mixing Graded fibrillated 100% virgin poly propylene fibres in concrete at the rate of 0.90 kg/cum as per manufacturers specifications. Treatment to continue along the vertical surface for 300mm height in shape of round Chamfering, curing etc. The concrete shall be provided with groove cutting of 6mm x 10mm at every 5m x 5m area, the joints shall be treated with elastomeric sealants Nitoseal PU 50all as specified and directed. |
| 20 | Providing and applying 2 coats of Brushbond Roofguard Premium, single component Acrylic based modified Polyurethane elastomeric Solar Reflective cum waterproofing coating at 0.5mm thickness over the primer layer of Nitoproof WB mixed with water in ratio 1:2 and applied at coverage of 8 - 10 sqm / litre (diluted with water) after thorough surface preparation of surfaces of roof/chajjas/canopies etc and allowed to dry.The single component coating shall be applied in 2 coats using roller or brush or aqueegee or airless spray at wet film thickness of 0.5mm per coat at coverage of 0.5 litre / sqm over the designated area and over the chajja, wall above chajja for a height of 900 mm and up to 600 mm on either side of chajja.Laying 200gsm non woven geo textile membrane over Brushbond roofguard premium coating with overlap sealed using synthetic rubber adhesive before providing screed concreteTheproduct shall have a solid content of 50%, Tensile strength >2Mpa (ASTM D412), Elongation >250% (ASTM D412), Shore A Hardness : 75 (ASTM D2240), Tear Strength : 13 N/mm (ASTM D624), Adhesion to substrate : 2 Mpa concrete failure (ASTM D4541), Crack bridging : 2mm ( ASTM C 836), UV resistance 1000 hours : Pass ( ASTM D4587) , Service Temperature : -10°C to +60°C ,SRI- 100% .The coating shall be extended to the parapet wall total height as per manufacturer\"s specificationall as specified and directed. |
| 21 | Taking down chowkhats or frames (without taking off shutter from the frame) notexc 1.5 sq. meach complete all as specified and directed. |
| 22 | Taking down chowkhats or frames (without taking off shutter from the frame) exc 1.5 sq. m but n exc 4 sq. m eachcomplete all as specified and directed. |
| 23 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and all as specified and directed. |
| 24 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. Note:- Rate inclusive of glass pane/PVC Sheet as per direction by Engr-in-Charge.Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made all as specified and directed. |
| 25 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge.(Glass or wiremesh shall be paid separately). Note : For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 26 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be madeall as specified and directed. |
| 27 | S&F plain sheet glass 5.50 mm thick ordinary quality and glazing with oil putty/beading etcexc 0.50 Sqm each all as specified. |
| 28 | S&F plain sheet glass 5.50 mm thick ordinary quality and glazing with oil putty/beading etc n. exc 0.50 Sqm each all as specified including removal of old broken glass, complete all as specified and directed. |
| 29 | S & F stainless steel of 0.36 mm nominal dia of wire and average width of aperature 1.4 mm, fixed with aluminum wire staples complete all as specified and directed. |
| 30 | S & F alumimum extruded section body door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 801 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 31 | S&F floor door stopper of anodised aluminium alloy body and tongue, with hard drawn steel pring, end fitted with rubber bush (folding type), 140mm overall length of cover plate complete all as specified and directed. |
| 32 | S&F venetian blind using cotton/Nylon fabric of size as required for windows/ Ventilators horizontally rolling up and down with double layer cloth including rolling device on top and power coated aluminium double layer pipe at bottom, incl operating rope etc all as specified and directed. |
| 33 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etcall as specified and directed. |
| 34 | M&L for Rendering 15mm thick on fair faces of block masonsry work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 35 | M&L for Rendering 15mm thick on fair faces of block masonsry work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 36 | M&Lfor preparation of new treated wall surface and finishing walls with two coats of exterior emulsion (Apex) of required shade, over and including priming coat of exterior primer of required shade and colour complete all as specified and directed. |
| 37 | M&Lfor preparation of new treated wall surface and applying plaster of paris putty of 1 mm thickness over plastered surface and applying two or more coats of 1st quality acrylic distemper (ready mixed) , of approved manufacturer over a coat of primer, of required shade and colour complete all as specified and directed. |
| 38 | M&Lfor prepration of old decorated surface of walls/ceiling and applying plaster of paris putty of 1 mm thickness over plastered surface and applying two or more coats of 1st quality acrylic distemper (ready mixed), of approved manufacturer over a coat of primer, of required shade and colour complete all as specified and directed. |
| 39 | M&Lfor preparation of old decorated wall surface and finishing walls with two coats of exterior emulsion (Apex) of required shade, over and including priming coat of exterior primer of required shade and colour complete all as specified and directed. |
| 40 | M&L one coat of exterior emulsion weather coat terracotta paint over wall or floor/ MP tiles surfaces including the preparation of the surfaces, complete all as specified and directed. |
| 41 | M&L Second class hard-wood clean sawn, frame and fixed as in scantling/frame complete all as specified and as directed. |
| 42 | M & L 12mm thick Prelaminated plywood, prelaminatedon both sides with decorative choice laminations, fixed with screws to timber frame work as incupboards, warddrobes, covered cabinetetc including teak wood beading around the plywood/ teakwood lipping shall be finished with two coats of French polish. Note :- The rate shall be inclusive of all fittings required at site and as approved to the entire satisfaction of Engr-in-Charge/GE. |
| 43 | M & L 18/19mm thick Prelaminated plywood, prelaminatedon both sides with decorative choice laminations, fixed with screws to timber frame work as in cupboards, warddrobes, covered cabinet, etc including teak wood beading around the plywood/ teakwood lipping shall be finished with two coats of French polish. Note :- The rate shall be inclusive of all fittings required at site and as approved to the entire satisfaction of Engr-in-Charge/GE. |
| 44 | S&F 75mm long half folded auto close hingescomplete all as specified and directed. Make : Hettich or equivalent |
| 45 | S&F magnetic catcher fixed with screws including striking plate complete all as specified and as directed. |
| 46 | S&F decorative type handles brass, chromium plated for cabinet, drawers etc complete all as specified and as directed. |
| 47 | S & F mild steel 4 lever mortice lock, vertical type 100 mm size complete all as specified and directed. |
| 48 | Dismantling single layer mangalore pattern or similar tiles in roofing incl ridge tiles complete all as specified and directed. |
| 49 | M&L for cement mortar fillets of 40 mm wide and 20 mm thick for laying mangalore pattern tile on roof, in cement mortar 1:4, complete all as specified and directed. |
| 50 | M&L for Roof tiles Mangalore pattern inter locking at side joints, laid dry, complete all as specified and directed. |
| 51 | All as per item No 50 above but except tiles |
| 52 | M&L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and pointed in cement mortar 1:6. |
| 53 | All as per item No: 52 above but except tiles |
| 54 | S&F in repair Vitreous China Wash down water closetpan (Pedestal pattern), white incl plastic water closetseat and cover closed pattern with flat bottom and mild steel chromium plated or aluminised hingingdevice & incl P or S trap and connection totrap andto theflushing system anti syphonage pipe etc(excluding flushing cistern and flush pipe) complete all as specified and as directed |
| 55 | S&F in repairs vitreous china squatting pan \"Orissa\" pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and as directed |
| 56 | S&F in repair PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr capwhite with flush pipe & all fittingcomplete all as specified. |
| 57 | S&F in repairs Pillar taps,fancy type,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixedto pipe complete all as specified and directed. |
| 58 | S&F in repairs Stop valve/angle vavles, cast copper alloy, fancy type chromium plated, screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed for 15mm dia pipe complete all as specified and directed. |
| 59 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed. |
| 60 | S&F in repairs fancy type Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm bore or for brass ferrule and fixed complete all as specified and directed. |
| 61 | S&F fancy type two way Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm bore or for brass ferrule and fixed complete all as specified and directed. Make : Jaquar or equivalet |
| 62 | S&FHealth faucet (ABS Body) premium quality mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Health faucet with 1meter long easy flex tube in chrome finish and wall hook with NRV (Back Flow Preventer), complete all as specified anddirected.Make: Jaquar/CERA/Prayag |
| 63 | S&F in repairs concealed Stop valve/angle vavles, cast copper alloy, fancy type chromium plated with long shank & cup, screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed for 15mm dia pipe complete all as specified and directed. |
| 64 | S&F in repairs chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 65 | S&F brass chrominium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge. |
| 66 | S&F glass cornershelf made out of 5 mm thick glass guarded with CP brass guards complete all as specified and directed. |
| 67 | S&F stainless steel soap tray fixed with brass screws complete all as specified and directed. |
| 68 | S&F CP Grating doom 100 mm dia with waste hole of PTMT (minimum weight 40 grms) complete all as specified and directed. |
| 69 | S&F 75 PVC (SWR) multi floor trap with grating including jointing with solvent cementcomplete all as specified and directed. |
| 70 | S&F CP toilet paper holder, brass, brass fitted to wall complete all as specified and directed by Engr-in-Charge. Make : Jaquar or equivalet |
| 71 | Taking up or down 15mm dia steel tubing and connections , including cleaning for re-fixing or removal from storecomplete all as specified and directed. |
| 72 | Taking up or down 20mm dia steel tubing and connections , including cleaning for re-fixing or removal from storecomplete all as specified and directed. |
| 73 | S&F 15mm bore pipe Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., |
| 74 | S&F 20mm bore pipe Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., |
| 75 | S&F 20mm bore CPVC pipe with SDR 11& plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as specified and directed. |
| 76 | Taking up or down 25 - 32mm dia steel tubing and connections , including cleaning for re-fixing or removal from storecomplete all as specified and directed. |
| 77 | S&F 32 mm bore pipe Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., |
| 78 | M&L for Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20cm girth |
| 79 | S&F in repair 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of water tank and removing to store exc 500 ltr and n.exc 500 ltr all as specified in SSR Partcomplete all as specified and directed. |
| 80 | S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends complete. |
| 81 | S&F 20mm bore ball valves, high pressure,with polythene float and flynut complete. |
| 82 | Dismantling of rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and as directed. |
| 83 | S&F 110mm diaPVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls |
| 84 | S&F 75mm diaPVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches |
| 85 | S&F PVC (SWR) bends any radius, 110mm bore, fitted with oval access door |
| 86 | S & F bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and as directed |
| 87 | S&F PVC (SWR) bends any radius, 75mm bore, fitted with oval access door |
| 88 | S&F PVC (SWR) reducers any radius 110mm bore |
| 89 | S&F 110mm bore PVC (SWR) junction, single (single T) equal or unequal with door access |
| 90 | S&F 110mm bore PVC (SWR) junction, single (single Y) equal or unequal with door access |
| 91 | PVC (SWR) vent cowl 75mm dia |
| 92 | S&F in repair PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 93 | Demolition of cement conc (reinforced ) in ground floors and pavings n exc. 15cm thick.(Below or above ground level). |
| 94 | M&L Precast Cement Concrete (1:2:4) type B1 using 20mm gdd agg as in landings,cover slab(for manhole etc),chullah hoods,chajjas,water troughs,shelves and similar articles with plain faces set in CM (1:6) complete all as specified. |
| 95 | Mild steel TMT bars of 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm die or securing with clips quality . |
| 96 | M&L for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and as directed. |
| 97 | M&L for point wiring complete with 1.5 Sqmmsingle core FRLSHPVC insulated unsheathed cable 1100 V grade multi stranded copper conductor drawn through and including non metallic rigid PVC conduit and accessoriesconcealed in walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 1.22 mmthick modular metal flush box and suitable modular white cover plate with frame etc all as specified and directed.(a) One light /bell / fanpoint controlled by one switch/bell push |
| 98 | all as per above iten No 97 but for One switch socket outlet 5 Amps on same board |
| 99 | all as per above iten No 97One switch socket outlet 5 Amps on independent board |
| 100 | All as per item No all as per above iten No 97above but with copper conductor cable FRLSH 2.5 sqmm for one 3 pin socket outlet, 16 Amps concealed in wall/ ceiling and including provision of 2.5 sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board |
| 101 | M&L for submain wiringwith 2 Runs 4 Sq mm for phase and neutraland 1 runs of4 Sqmm earth continuity conductor 1100 v grade PVC insulated unsheathed FRLSHgrade copper conductor cable single core multistranded ISI marked drawn through PVC rigid conduit and aqccesssories and concealed in walls / ceilingall as specified. |
| 102 | Supply and fixModular switch 1 way 6A 1 module |
| 103 | Supply and fixModular socket 6A2/3 pin combined 2 module |
| 104 | Supply and fixModular switch 1way16 A 1 module |
| 105 | Supply and fixModular socket 6A /16A2/3 pin combined 2 module |
| 106 | Supply and fix Modular regulator , 120 w - 2 module |
| 107 | S&F surface mounting rail for 20 watt LED tube with Special intergral lamp holder and bracket including 20- watt LED tube complete with accessories internally , pre-wired connecting up with twin core flexible copper conductor cable of suitable size. Make CG/Wipro/Havells |
| 108 | S&F surface mounting LED battern with Nano diffuer technivally to ensure minimum loss in light transmitted 10 Watt LED fittings including 10 watt tube rod complete with all accessories internally , pre-wired connecting up with twin core flexible copper conductor cable of suitable size. Make :CG/Havells/Wipro/Luker |
| 109 | S&F of Ceiling rose, surface bakelite, 65x50mm, two to three terminals AC,230 V complete all as specified and as directed |
| 110 | S & F SPN 4 way of any size and capacity double door with suitable busbar including disconnecting from mains and making good the disturbed surfaces all as directed. |
| 111 | S & F SPN 12 way of any size and capacity double door with suitable busbar including disconnecting from mains and making good the disturbed surfaces all as directed. |
| 112 | S & F TPN4 way of any size and capacity double door with suitable busbar including disconnecting from mains and making good the disturbed surfaces all as directed. |
| 113 | Supply and fix ofMCB 230V,50Hz, \"C\" curve AC with repturing capacity 10kA of the following capacities all as specified and as directed. (a) SP 5 To 32 Amp |
| 114 | all as per above iten No 113 RCCB 40 amps sensitivity 100mA |
| 115 | Supply and fix of415V 10KA \"C\" curve miniature circuit breaker (MCB) TPN 63A and current carrying capacity in the DB complete with connection testing and commissioning. |
| 116 | Removing of exsitingCeiling fan 1200mmsweepfrom postion, painting with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc, kept in safe custodyand refixing after completion of work to postion, alongwith required accessoriesin new postion as directed |
| 117 | M&L for cutting & removing the burnt winding of ceiling fan of 1200 mm sweep and cleaning the slot,rewinding with super enamelled copper wire of suitable size ,varnishing heating and insulating and reassembling the spares complete all as specified. |
| 118 | M&L for cutting & removing the burnt winding of Exhuast fan of 300/450mm sweep and cleaning the slot,rewinding with super enamelled copper wire of suitable size ,varnishing heating and insulating and reassembling the spares complete all as specified. |
| 119 | Removing of exsitingExhaust fanup 300mm/450mmsweepfrom postion, painting with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc, kept in safe custodyand refixing after completion of work to postion, alongwith required accessoriesin new postion as directed |
| 120 | Earth continuity conductor or main earthing lead fixed to wall on battan or reccess or chases or buried in ground or drawn in conduit or pipe or fixed to a poles or any other indicated situation for loop earthing etc.as required 4 mm dia GI or steel wire complete all as specified and as dirtected . |
| 121 | M & L for Earthing complete with GI earth plate 60x60cm.x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate to a depth not less than 1.5m below ground level, connected to and including GI wire 4mm dia with GI protection pipe 15mm dia light grade connected upto DBs by means of bolts, nuts, check nuts and washers made of copper, galvanizediron pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC 1:2:4 cover slab 50mm thick with re-inforcement of 8 mm TMT bars @ 100mm c/c both directions and PCC chamber with PCC 1:3:6 type C2 including excavation and earth work, disposal of surplus soil to a distance not exceeding 50m, charcoal, lugs, common salt complete all as specified and as shown on plate No.3 of SSR Part-I |
| 122 | S&F Exhaust fan,steel body AC single phase 230 V of size 300mm sweep with blades and frame and louvers incl cutting suitable size hole as specified and directed. |
| 123 | M&L for cutting of hole on existing wall suitable size for fixing 300mm sweep exhaust fan and making good the disturbed surface incl plastering ,painting as per the existing colour all as specified and directed |
| 124 | Supply and FixWall fan 400 mm sweep 230 volts single phase suitable for wall mounting including fitting accessories all as specified.Make Havells/Bajaj/Crompton |
| 125 | Supply and fix recess mounting LEDlight fittings1 x 33 / 36 watts LED panel system efficiency 36 W LED 6500 K model suitable for fitting infalse ceiling complete all as specified and directed. Make : Havells/Wipro/Crompton |
| 126 | S&F building security light LED 25 watts complete with GI brakets not less than 1.2 Mtr made out of medium grade GI tubing complete all as specified and directed Make :Gold medal -GL9C0801424 or EquivalentHavells/Wipro/Crompton |
| 127 | Provn of Toilet for staff in Bldg No. P/117 at HQ SAC(U) |
| 128 | Excavating in trenches , n exc 1.5 m wide and n exc 1. 5 m in depth for foundation etcn exc 10 SqMon plan and n exc 1,5 m in depth and getting outHard/dense soil |
| 129 | M&L, for laying PCC 1:4:8 (40mm graded aggregate) type D-2Cement concrete in foundations, filling and mass concretecomplete all as specified and directed. |
| 130 | Removing excavated materialn exc 50 m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and dircted. |
| 131 | Returning filling in including spreadng levellin watering and well ramming in layers not exc 25 cm complete all as specified and directed |
| 132 | M&L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface 75 mm (Broken stone or boulders)PP |
| 133 | M&L, for Reinforced cement concrete (design mix) RCC M-30 (using 20 mm graded stone aggregate ) in foundation footing , plinth beams, base of column , under reamed piles and mass concrete, complete all as specified and directed. |
| 134 | M&L Reinforced cement concrete (design mix)M-30(using 20 mm graded stone aggregate ) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 135 | M&L for RCC M-30 design mix (20mm graded aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed. |
| 136 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick etc for fair finished surfaces, complete all as specified and directed. |
| 137 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bresummers, lintels over 1.5m span etc complete all as specified and directed |
| 138 | S&F mild steel TMT bar 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm including clips complete all as specified and directed. |
| 139 | S&F mild steel TMT bar 6mm to 8mm dia and over cut to length, bent to shape required including cranking, bending spirally for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm including clips complete all as specified and directed. |
| 140 | M&L for Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:6, complete all as specified and directed. |
| 141 | M&L rendering 10mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without usingextra cement |
| 142 | M&Lfor preparation of new treated wall surface and applying two coats of oil emulsion distemper over a coat ofalkali resisant primer complete all as specified and directed. |
| 143 | M&L for rendering 5mm thick on fair face of brick work or concrete surface in CM 1:3including finished the surface even and smooth with out using extra cement complete all as specified and directed. |
| 144 | M&L for preparing new plastered decorated surface of ceiling and applying one coat of white wash on ceiling all as specified and directed |
| 145 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 146 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 147 | S & F butt hinges medium weight cold rolled mild steel 100 mm long complete all as specified and directed. |
| 148 | S & F 200 mm long aluminium, anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed. |
| 149 | S & F 150 mm long extruded aluminium alloy handles, fabricated type, anodized, ISI marked complete all as specified anddirected. |
| 150 | S & F aluminium alloy anodised sliding door bolt with hasp and staple (bolt type), 250 mm long, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminum alloy complete all as specified and directed. |
| 151 | S&F multi Floor trap Plain with Grating 75 mm dia including jointing with solvent cement complete all as specified and directed. |
| 152 | S&F 20mm bore pipe (LEAD FREE), Unplasticised PVC pipes of pressure rating 10 kgf/cm2, fixed complete to walls, ceilings or in floors etc.,complete all as specified and directed. |
| 153 | S&F75 mm,bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floors etc and including necessary scafolding where is required, complete all as specified and directed. |
| 154 | S&F110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floors etc and including necessary scafolding where is required, complete all as specified and directed. |
| 155 | S & F110 mm bore PVC(SWR) bends of any radius etc, complete all as specified and directed . |
| 156 | S & F in75 mm bore PVC(SWR) bends of any radius etc, complete all as specified and directed . |
| 157 | M&L for applying 3mm wall care putty on wall surfaces, complete all as specified and directed. |
| 158 | S&F Vitreous China wash basin, white, flat back, size 550x400excluding taps, waste, chain and plug andporcelainstopper but including brackets complete all as specified and directed. |
| 159 | S&F32 mm dia waste coupling of PTMT half or full thread suitable for kitchen sink or wash hand basin (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed. |
| 160 | Supply only plastic water closet seat cover, closed pattern with flat bottom seat cover, mild steel chromium pated or aluminised hinging device and colour as approvedcomplete all as specified and directed. |
| 161 | S&F 32 mm dia waste pipe suitable for wash hand basin and sink complete all as specified and directed. |
| 162 | S&F 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 |
| 163 | S&F looking mirror 600x450 mm size fixed with aluminium frame with 6mm ply wood/black board/AC building board fixed with screw fixed repairs complete all as specified and directed by Engineer in charge. |
| 164 | S&F PTMT ballvalve, high pressure, with polyethene float and fly nut complete, screwed for iron pipe of brass ferrule of 25mm dia bore complete all as specified and direceted. |
| 165 | M&L,ATT for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface |
| 166 | M&L, ATT for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area |
| 167 | M&L, 75mm thick pcc 1:3:6 type-C-2 in plinth protection 40mm graded aggregate with necessary form work |
| 168 | S& F PVC(SWR) Vent cowl of 110mm dia complete all as specified and directed |
| 169 | S& F PVC(SWR) Vent cowl of 75mm dia complete all as specified and directed |
| 170 | S&Ftank connector, PVC suitable for fixing to outlet pipe of any description and 32mm dia bore commplete all as specified and directed. |
| 171 | S&F PVC gate valve with handle, fixed both end for PVC pipe of 32mm dia bore complete all as specified and directed. |
| 172 | S&F straight glass shelf made out of 5 mm thick glass graded with CP brass guards complete all as specified and directed by Engr-in-Charge. |
| 173 | S&Ftoilet paper holder, brass, CP brass fitted to wall complete all as specified and directed by Engr-in-Charge.Make: Jaquar/CERA/Prayag or equivalent |
| 174 | M&Lfor provn of water proofing roof treatment to RCC roof with APP modified membrane with non woven polyster reinforced wt not less than 3 Kg/Sqm of thickness not less than 3 mm having thermalinsulation with white mineral/ gravel finish on upper side of membrane uniformely embedded during manufacturing process . All as per following specifications: |
| 175 | (a) The surface of the roof, parapet and gutters, drain mouths etc. over which water proofing treatment is to be applied shall be cleaned of all foreign matters such as fungus, mass, dust etc. by wire brushing and dusting. For cast iron drain outlets the grove shall be cut around to tuck in the treatment as pipes, chimneystacs etc. and other similar situations to ease up about corners. |
| 176 | (b)Bituminous primer conforming to IS : 3384-1965 oil bound bitumen primer @ 0.20kg per sqm and applying a coat blown grade hot bitumen 85/25 or 90/15 @ 1.20 kg/sqm to be applied an prepared surface till the surface is properlyimpregnated. |
| 177 | (c) APP modified water proofing membrene as specified shall be laid on the primer surface by torch application method as per manufacturers instructions, The overlaps while torching shall be 100 mm in both directions(longititudinal and transverse directions). All overlap joints shall be sealed throughly by thermofusing both the membrene layers and sealing it with the help of hot trowel. The overlap joints shall be made as monolithic layer. |
| 178 | (d) All joints& changes in direction should be curved with cement morar 1:3 mixed with SBR latex @ 200 ml per beg of cementand cured well before laying the membrane. |
| 179 | (e)Apply one coat of solar reflective bituminous aluminium paint @ 100 gm per sqm over a coat of aluminium red oxide primer on the APP membrane, complete all as specified and directed by Engr-in-Charge. |
| 180 | S&F of 1 X 11W/2X9 W Skecth fittingswith surface mounting LED battern with Nano diffuer technivally to ensure minimum loss in light transmitted 10 Watt LED fittings including 10 watt tube rod complete with all accessories internally , pre-wired connecting up with twin core flexible copper conductor cable of suitable size. |
| 181 | Supply and fix ofMCB 230V,50Hz, \"C\" curve AC with repturing capacity 10kA of the following capacities all as specified and as directed. (a) SP 5 To 32 Amp (SPN) |
| 182 | Supply and fixing of 200 mm sweep PVC Exhaust Fan (230V, single phase, lightweight rust-proof body) including suitable mounting frame, clamps/fasteners, necessary electrical connections, and making good the wall opening, tested and completed in all respects as directed by Engineer-in-Charge. |
| 183 | Material and labour for carefully cutting the existing 40mm GI pipeline at the desired location using a suitable pipe cutter, ensuring minimal damage to adjacent sections. After cutting, insert and fix a 32mm GI Tee-connector in line with the pipeline, making proper threaded joints with adequate sealing compound/teflon tape for leak-proof performance. Connect a 32mm UPVC pipe to the branch outlet of the Tee-connector using appropriate transition fittings (GI–UPVC adopter), solvent cement, and clamps wherever required. Ensure all connections are properly aligned, securely fixed, and tested under pressure for leakage. Complete the work in all respects including necessary tools, labour, and safety precautions as directed by the Engineer-in-Charge. |
| 184 | Provn of pump sets and allied works for various SWTs at HQ SAC (U) at Trivandrum |
| 185 | Supply and fix replacement 3-layer UPVC pipes of pressure rating 10 kgf/sqr cm having thermal stabilityincluding all UPVC plain and brass threaded polypropylene random fittings fixed for size 32mm dia bore complete to walls,ceillings or in floorscomplete all as specfied and directed |
| 186 | S & F in replacement of Gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe of size 32mm diabore and conforming to IS 778 of 1984 complete all as specified and directed.Make : Leader/Kirloskar/Zoloto |
| 187 | Supply and laying and testing ofmedium grade galvanised iron steel tubing of 50mm, ISI marked, including GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tees, checknuts, caps, plugsetc complete laid in trenches/floors etc complete all as specified and directed. Make : Jindal/Tata/Prakash |
| 188 | S & F Gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe of 50mm size of bore and conforming to IS 778 of 1984 complete all as specified and directed.Make : Leader/Kirloskar/Zoloto |
| 189 | Supply Install testing and commissioning of Submersible pump Set of 2.2KW/3 HP , ModelJOS-326 65x50 3P CII ,2890 RPM,3 Phase Induction motor ,415 V ,50HZ of 15mtr headand 300 LPM, cast iron impeller and gland packing with necessary base plate duly grouted as recommended by OEM,pressure gaugees with control valves,provn for priming etc,foundation and connection from starter to motor using suitable size of copper cable drawm through suitable size concealed rigid PVC conduit pipe all complete all as directed. |
| 190 | Supply and install motor control panel board 3 phase ,4 wire 50 HZ 415 v ,Outdoor cubical type,dust and vermine proof ,Pedastal type including foundation and civil works, all prewired fabricated out of 3.15mm thick CRCA sheet duly pre treated and powder coated,factory fabricated panel incl cable glands of suitable sizes andconsisting (i) DOL Starters alongwith Relay of 10A Capacity -2 No(ii) Indicating lamps neon type for RYB phases(iii) suitable sizes ofDigital Voltmeters and Digital Ammeteralong with HRC fuse of suitable capacity(iv) MCCB 4 Pole 63A-1 No(v) MCB TP 32 A-2 No |
| 191 | S & F UPVC flat submersible, water proof cable, 3 core6 Sqmm copper conductor, multi stranded 1100V grade complete all as specified and directed.Make : Finolex/Plaza/ Polycap |
| 192 | Supply and lay cable XLPE insulated screened PVC bedded ,galvanized steel strip or armored ,electric powerf cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core with necessary terminal lugs and glands etc all as directed |
| 193 | M & L for Earthing complete with GI earth plate 60x60cm.x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate to a depth not less than 1.5m below ground level, connected to and including GI wire 4mm dia with GI protection pipe 15mm dia light grade connected upto DBs by means of bolts, nuts, check nuts and washers made of copper, galvanizediron pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC 1:2:4 cover slab 50mm thick with re-inforcement of 8 mm TMT bars @ 100mm c/c both directions and PCC chamber with PCC 1:3:6 type C2 including excavation and earth work, disposal of surplus soil to a distance not exceeding 50m, charcoal, lugs, common salt complete all as specified and as shown on plate No.3 of SSR Part-I |
| 194 | M&L for protection to cable with one layers of new bricks (old size) laid flat butting to each otherusing old size sub - class B bricks |
| 195 | Supply & Fix Fire Fighting Delivery Hoses Reinforced rubber lined type in 15M of length, 50mm dia, IS marked and tested to a bursting pressure of 32kg/sq.cm and with heavy quality SS/ aluminium metal couplings with IS mark. (IS 903) Make: Newage/ Kartar |
| 196 | Supply & Fix of Double Hose Cabinets to accommodate one pieces of hose pipes along with one pair of male and female coupling and one branch pipe. The cabinet is made up of MS sheet, glass fronted with hinged doors, painted with scarlet red outside and off white inside and with lock and key. Make: Friends Eng./ Kartar |
| 197 | M&L for provnof brick masonry Pedestal of size 0.345 x 0.345 x 1.1 m (0.7m above GL) incl PCC Foundation, plastering , white wash etc complete all as specified and as directed.The quoted rate of item shall include the following:-(a) Excavation in post hole (or similar holes) each n.exc 0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good in hard/dense soil.(b) 100mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate with 50mm offset on each side in foundation (c) Brick work in CM 1:6,Rendering 10 mm in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.incl three coat of white wash after preparation of surfaces all as specified |
| 198 | M&L for road cutting including excavation , returning filling in, spreading, levelling, well ramming in layers,hardcore with store aggregates received from dismantling the road for 100mm thick and finishing with PCC 1:2:4 with 20mm aggregate for 100mm thick and compacted complete all as directed and match to the existing finish at site. |
| 199 | M&L for cement concrete in foundations, surface drains,walls,mass concrete etc type B2(1:2:4) using 40 mm graded stone aggregate. |
| 200 | S & Fgun metal non return valve of 50 mm dia bore, screwed complete all as specified and directed.Make:leader/ Kirloskar/ Zoloto/Kartar |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
