|
| 1 | SCHEDULE \"A\" PART IComprehensive Maintenance of Lifts including out daily check and periodical services of fully automatic electrical Lift with, Renewing all wire ropes and chains (where fitted) as often as required to maintain an adequate factor of safety, to equalize the tension on all hoisting ropes, repair or replacement of conductor cables and hoist way and machine room elevator wing, Systematically examining and adjusting the mechanism worm gear, thrust bearing, drive sheave, drive sheave bearing, brake contact, lining and components, motor, motor generator, motor winding, rotating elements, commutator, brushes, brush holders, bearings, coils, Resistance for operating and motor circuits, magnet frames and other mechanical parts.Systematically examining and adjusting the mechanism worm gear, thrust bearing, drive sheave, drive sheave bearing, brake contact, lining and components, motor, motor generator, motor winding, rotating elements, commutator, brushes, brush holders, bearings, coils, Resistance for operating and motor circuits, magnet frames and other mechanical parts. Systematically examine the controller, selector, leveling devices, cams, relays, solid state components e.g PCBs, transducers, resistors, condensors, power amplifiers, transformers, contacts, leads, dashpots, timing devices, steel selector tapes and mechanical and electrical driving equipment, governor, governor sheave, shaft assembly, bearings, contacts and governor jaws, Repair to car and hall mechanical buttons, car and hall position indicators, hall lanterns, car direction indicators and all other car and landing signal fixtures as installed by OTIS/Thyssenkrupp. Repair/Servicing of deflector or secondary sheave, bearings, car and counterweight guide rail and buffers, top and bottom limit switches, governor tension sheave assembly, compensating sheave assembly, car, counterweight, and counterweight guide shoes including roller or grib. Examining and repair to interlocks on hoist door, hoist way door hangers, guides, automatic power operated door operated operator, car door hanger, car door contact, safety shoes, load weighing equipment, car frame, car safety mechanism and platform. |
| 2 | 06 PS Lift (408 Kg)capacity (G+5 Storey) in bldg No Asha-2(N) , Asha-4(N), (Total 02 Nos of Lift) |
| 3 | 08 PS (544 Kg) capacity in bldg (G+14)in bldg No R- 6, R-8, R-14, R-23, R-24, R-26 (Total 06 Nos lift). |
| 4 | 13 PS lifts (884 Kgs) capacity (G+14) in bldgR- 8, R-18, R-19,R-29, R-31, Mesh (Total 06 Nos lift). |
| 5 | Goods Lift29 PS ( 2000 Kgs)capacity ( G+14) in Bldg NoR- 4, R-5, R-6, R-07, R-12, R-13, R-14,R-15, R-23,R-24, R-26, R-27( Total 12 Nos lift) |
| 6 | SCHEDULE \"A\" PART IIComprehensive Maintenance of Lifts including out daily check and periodical services of fully automatic electrical Lift with, Renewing all wire ropes and chains (where fitted) as often as required to maintain an adequate factor of safety, to equalize the tension on all hoisting ropes, repair or replacement of conductor cables and hoist way and machine room elevator wing, Systematically examining and adjusting the mechanism worm gear, thrust bearing, drive sheave, drive sheave bearing, brake contact, lining and components, motor, motor generator, motor winding, rotating elements, commutator, brushes, brush holders, bearings, coils, Resistance for operating and motor circuits, magnet frames and other mechanical parts.Systematically examining and adjusting the mechanism worm gear, thrust bearing, drive sheave, drive sheave bearing, brake contact, lining and components, motor, motor generator, motor winding, rotating elements, commutator, brushes, brush holders, bearings, coils, Resistance for operating and motor circuits, magnet frames and other mechanical parts. Systematically examine the controller, selector, leveling devices, cams, relays, solid state components e.g PCBs, transducers, resistors, condensors, power amplifiers, transformers, contacts, leads, dashpots, timing devices, steel selector tapes and mechanical and electrical driving equipment, governor, governor sheave, shaft assembly, bearings, contacts and governor jaws, Repair to car and hall mechanical buttons, car and hall position indicators, hall lanterns, car direction indicators and all other car and landing signal fixtures as installed by Schindler. Repair/Servicing of deflector or secondary sheave, bearings, car and counterweight guide rail and buffers, top and bottom limit switches, governor tension sheave assembly, compensating sheave assembly, car, counterweight, and counterweight guide shoes including roller or grib. Examining and repair to interlocks on hoist door, hoist way door hangers, guides, automatic power operated door operated operator, car door hanger, car door contact, safety shoes, load weighing equipment, car frame, car safety mechanism and platform. |
| 7 | Notes for item No 2.00: (i) The Contractor has to carry out the AMC of the Lifts through OEM only (ii) The AMC should cover any/all parts of Lifts if its fucntions found defective the same should be repaired or replaced by the OEM as per the timeline covered under norms.(iii) One mechanic shall be available round the clock at lift complaintcell for safe & smooth functioning of the lift.(iv)Rewinding of motor if required will be done by the contractor and no extra cost will be given by the department.(v) The detailed lift mechanics of the firm shall report to the JE Concerned at the Lift complaint cellfor receiving the complaints at round the clock daily including sunday and holiday.(vi) The detailed lift mechanics shall sign ( Their shift wise) in the attendence register kept with lift cell.(vii) Cost of minor spare parts / routine material required for above mentioned maintenance is deemed to be included in the quoted rate except items mentioned here-in-after. No additional cost of spares is admissible for the above maintenance. Decision of the Accepting Officer shall be final & binding regarding minor spares/ routine material(viii) Monthly schedule for proper maintenance of lift and necessary documentation including all spare parts required to be replaced during the period shall be as directed by Engineer-in-Charge.(ix)All minor spare parts and partsrequired for repair / replacement for maintenance of lifts to be replaced during AMC at no extra payment.(x) Bidders are to submit license from Govt. of maharashtra for maintenace & erection of lifts issued by chief electrical inspector. |
| 8 | 08 Ps Lift ( 544 Kgs)(G+6 Storey) in building AQ & AR Bldg (Schiendler) Total 02 Nos of Lift |
| 9 | 08 Ps Lift ( 544 Kgs)(G+21Storey) in R- 41 & 42 building (Schiendler) Total 04 Nos of Lift |
| 10 | 13 Ps Lift ( 544 Kgs)(G+21Storey) in R- 41 & 42 building (Schiendler) Total 02 Nos of Lift |
| 11 | 13 Ps Lift (884Kg) (G+6 Storey) in Buildings AQ & AR Bldg (Schiendler) Total 02 Nos of Lifts |
| 12 | SCH \"A\" PART IISupply and fixing in repairs main steel wire rope 13mm dia, ungalvanised, 8/19 construction in and including necessary connection with counter weight, pulley & car cabin with clamps, nuts, bolts & washer etc complete all as directed by Engineer-in-Charge. |
| 13 | Supply and fixing in repairs Governer rope of size 8 mm dia (8/19 Construction) ungalvanised including necessary connection with pulley in machine room and shaft pit complete with clamps, nuts, boltsand washers etc, for high rise building for 8/13/Goods lifts complete all as specified and directed by Engr-in-Charge. |
| 14 | Supply and fixing in repairs cabin fan, non-oscillating type, axial flow, single speed 300mm sweep, 240 volts ISI marked with grill complete all as directed by Engineer-in-charge. |
| 15 | Supply and fixing in repairs travelling cable PVC Insulated 16 Core with stranded copper conductor, 1100 volts grade of size 0.75 Sqmm conforming to relevant IS including suitable size copper criping with lugs,thimples etc.complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supply and fixing in repairs full beam infrared sensor upto full length of car doors not less than 2.00 mtr complete all as specified and directed by the Engineer-in-Charge. |
| 17 | Supply and fixing in repairsautomatic door drive unit with motor on car top with VVVF of 1 HP capaicity as per existing complete all as specified anddirected by Engineer-in-Charge. |
| 18 | Supply and fixing in repairs main drive (any type) from existing control panel and supply and fixing CAN BAS Integrtaed drive suitable for 8/13 Ps lift G+14 storey building including making all electric connections complete all as specified anddirected by Engineer-in-Charge. |
| 19 | Supply and fixingin repairslanding push button box complete with stainsless steel face plate 1.5mm thick having 02 push button and combined digital position indicator witharrow indicator complete including cutting walls for fixing of push button unit including making good disturbed wall surfaces as per existingcomplete all as directed by Engineer-in-Charge. |
| 20 | Supply and fixing in repairsautomatic door drive unit with motor on car top with VVVF of 1 HP capaicity as per existing complete all as specified anddirected by Engineer-in-Charge. |
| 21 | Supply and fixing in repairs hooter with emergency call announciator working on 12 Volts with audibility 90DB @ 1M distance with complete accessories like push button switches,alongwith box including connecting with copper conductor cables all as specified and directed by Engineer-in-Charge, |
| 22 | Material and labour for 18 mm thick machine cut granite stone slab fixed with appropriate adhesive/ glue and pointed with white cement mixed with admixture of pigment to match the shade of granite stone including necessary grinding and polishing grooving and rounding edges etc in any type of work and any position over a backing coat of 10 mm thick in CM 1:3 including dismantling existing granite slab and removing debris outside MD land complete all as specified and directed by Engr-in-Charge. |
| 23 | Material and labour for Breaking, chipping of loose concrete / plaster, cleaning of the existing surface of lift pits and repair to cracks in concrete after opening in V groove and filling with polymer modified concrete (1:3) with admixture. Injection grouting to be done at30 cm c/c with cement slurry with admixture @ 1kg per 50kg bag of cement .Application of primer & 2 coats of ShaliCem-EWP as per manufacturers instructions and making the lift well completely seepage and dampness free complete all as specified and directed by Engr-in-Charge. |
| 24 | Disconnecting and taking out unserviceable ARD and repair of ARD for proper operation including necessary wiring with machine and controller consisting of the following :- |
| 25 | Supply and fixing PCB Card, relay with control wiring as per existing for G+14 storey building. |
| 26 | Supply and fixing sealed maintenance free batteries ( Set of Four) each of 12 volts, 18 AH ( Two year maintenance free)complete all as specified. |
| 27 | Supply and fixing in repairs Aluminimum Chequered plate of 5mm thick duly fixed with nuts, bolts, screws and washers and aluminimum angle of size 40mm x 40mm x 4mm thick fixed on corner of cabin including platform base of 10mm thick plywood BWR grade suitable for 08/13 Ps lifts |
| 28 | Supply and fixing in repairs OSG Pulley both top and bottom for 8 & 13 Ps Lift as specified and directed by Engr-in-Charge. |
| 29 | Supply and fixing in repairs false ceiling made out of stainless steel hair line finish 1.2mm thick and fixed with necessary nuts, bolts washers etc including making provisions & including fixing of cabin fan of non oscillating type axial flow, single speed 300 mm sweep and six 10 watt LED luminous bulb for 08 PS lifts of any make |
| 30 | Supply and fixing in repairs false ceiling made out of stainless steel hair line finish 1.2mm thick and fixed with necessary nuts, bolts washers etc including making provisions & including fixing of cabin fan of non oscillating type axial flow, single speed 300 mm sweep and six 10 watt LED luminous bulb for 13 PS lifts of any make |
| 31 | Supply and fixing in repairs false ceiling made out of stainless steel hair line finish 1.2mm thick and fixed with necessary nuts, bolts washers etc including making provisions & including fixing of cabin fan of non oscillating type axial flow, single speed 300 mm sweep and six 10 watt LED luminous bulb for Goods lifts of any make |
| 32 | Supply and fixing in repairs MP3 voice announcement system in the controller and high quality speaker on car top, with necessary provision of shaft wires and travelling cable complete as specified. The audio indicator shall announce floor position, ARD made operation, overload announcement etc and continious mild music in hindi and can be programmable for more music. The announcement system shall be in hindi and english including testing after completion complete all as specified and directed by the Engineer-in-Charge.. |
| 33 | Supply and fixing in repairs shaft wiring in hoist way upto lower limit with PVC insulated copper conductor cable single core, 1100 Volts grade 0.75 Sqmm 24 Nos single core & 1.0 Sqmm for earth wire duly bunched with wire binding locking strip, drawing through in and including galvanised sheet metal trunking of 24 SWG up to ground floor in hoist for control to all functions including in built connection for control panel, PCB, Hall push button, fire switch and lower limit switch complete all as specified and directed by the Engineer-in-Charge. for G+14 Storey building. |
| 34 | Supply and fixing in repairs CAN BAS Integrated Drive based collective control panel in hinged MS powder coated cabinet with control wiring comprising with multiple microcontrolled programmed chip based controlled by pulse modulation, complete with all safties such as thermal overload protection, over current protection, auto phase reverse link to each other in net work and compitable to 11 KW/15HP capacity VVVF drive including proper connection with suitable size lugs, terminal connectors screws and motor connection with galvanised sheet trunking 24 SWG including wiring of main motor with suitable sizestranded copper cable etc complete all as specified and directed by Engineer-in-Charge for G+14 story. |
| 35 | Supply and fixing in repairs aluminium covered wire wound dynamic breaking resistor to absorb the reverse energy dissipation of motor during regeneration in control operation suitable for 11.0 KW/15 HP motor complete all as specified and directed by Engineer-in-Charge. |
| 36 | Supply & fixing in repairs ARD system suitable for upto 11 KW motor including wiring with connected items in existing G+14 Storey building 08/13 Passenger lifts 415V,50 Hz,3 phase with a speed of 1.2 mtr/sec comprising with maintenance free battery 12 V, 18 AH (04 Nos with five year Maintenance free battery) suitable for existing capacity motor and controller systemand testing after completion complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply and fixing in repairs car door from car cabin comprising of 02 Nos power operated auto tele/centre opening for 800/900 mm opening by horizontal sliding stainless steel panel 1.2 mm thick sheet, flush type complete with headers for 08 ps lift all as specified and directed by Engr-in-Charge. |
| 38 | Supply and fixing in repairs car door from car cabin comprising of 02 Nos power operated auto tele/side opening for 900/1000 mm opening by horizontal sliding stainless steel panel 1.2 mm thick sheet, flush type complete with headers for 13 Ps lift all as specified and directed by Engr-in-Charge. |
| 39 | Supply and fixing in repairs car door comprising of 02 Nos power operated auto tele/side opening for 1100/1200 mm opening by horizontal sliding stainless steel panel 1.2 mm thick sheet, flush type complete with headers for Goods lift all as specified and directed by Engr-in-Charge. |
| 40 | Disconnecting and taking out unserviceable COP assembly of Existing COP with Touch Screen COPfor G+5/G+14 storey building, supply and fixing new car operating panel assembly completed with illuminated Touch screen button for floor position alarm, non stop door open , door close, cabin fan, cabin light stop, attend out key etc with direction indicator,with LED Touch screen display with Glasscard of Touch screen plate in and including necessary wiring for laminating push button alongwith light connectionof each floors and cutting wall, making good disturbed surface with machinary work to completeall as specified and directed by Engineer-in-charge. Location: CWE,R-23and depositing Old COP to the MES store yard. |
| 41 | Supply & fixing in repairs STM- Belt PV30 -1.73S-PU-42 complete all as specified and directed by Engr in Charge |
| 42 | Supply & fixing in repairs Retrofit belt pulley complete all as specified and directed by Engr in Charge |
| 43 | Supply & fixing in repairs LPCB Card complete all as specified and directed by Engr in Charge |
| 44 | Supply & fixing in repairs SPU Card complete all as specified and directed by Engr in Charge |
| 45 | Supply & fixing in repairs SMIC Card complete all as specified and directed by Engr in Charge |
