|
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead |
| 2 | 12 mm cement plaster with cement mortar in proportion 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80 mm in girth and finished even smooth .thick plaster mix 1:4 (1 cement :4 coarse sand) etc |
| 3 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 4 | Two coat oil distemper on old work including supply of aof all materials ,labour and T& P etc. required for proper completion of the work |
| 5 | One priming coat & two coat oil distemper on new work including supply of aof all materials ,labour and T& P etc. required for proper completion of the worknew work |
| 6 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 7 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (two or more coat applied @ 1.67 ltr/10 sqm). sqm |
| 8 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 9 | Providing and laying Vitrified tiles in floor without lean concrete of 600x 600mm sizes (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, including grouting of joints. |
| 10 | Providing and laying Ceranie glazed floor tiles of size 300x300 (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement 4Coarse sand), Jointing with grey cement slurry @3.3 kg/spm including pointing the joints with white cement and matching pigment etc., complete. |
| 11 | Supply and fixing of flush doors, commercial quality conforming of 1.S. 2202 part-1 (1983) including ISI marked oxidized iron fitting with screws, Bolt Hinges, Handles, Siliding bolt, Door Stopper and tower bolt etc. 35 mm thick |
| 12 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 13 | Painting on iron works in small areas in old steel work with one coat ready mixed priming paint and two coat of approved superior quality ready mixed paint including supply of all materials labour T & P etc.Required for proper completion of the work. |
| 14 | Painting or vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & coat of approved superior quality ready mized paint of clear synthotic varnish Including supply of all materials, labour and T & P etc, required for proper complotion of work. Paint to be used should confirm to ISI . |
| 15 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) laid in one layer finished with a floating coat of neat cement, etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 16 | Oiling & greasing for rolling shutter |
| 17 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos Cement sheet |
| 18 | Supply and fixing 6 mm thick grey corrugated asbestos sheet in roofing including supply of all materials labour T & P etc.Required for proper completion of the work and including wastage. |
| 19 | Supply and fixing ridges valley and gutters fixed with J and U bolts 10 mm dia with g 1 limpet and bitumen washers complete including supply of all materials labour T & P etc.Required for proper completion of the work and including wastage. |
| 20 | Excavation in foundation in ordinary soil (loam clay, or sand) including lift upto 1,5 metre and lead upto 30 m & including filling, watering and ramming of excavated earth into the trenches or into the space bwtween the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge of 30 m from the foundation trenches. |
| 21 | First class brick work in 1:4 cement and coarse sand of 1.25 F.M. mortar in foundation plinth including supply of all materials ,labour and T& P etc. required for proper completion of the work. |
| 22 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 23 | Dismantling steel workmanually by mechanical means in built up sections without dismembering and stcking within 50 metres lead as per direction of Engineer in charge. |
| 24 | M.S. or iron work in heavy sizes and section such as holding down bolts,hold fasts ,theods grading etc.wrought to required from including supply to steel bolt ,nuts wastage etc. and their fixing required for proper completion of thework but in heavy sizes such as trusses built up gates record rack roof work gates etc including rivetting and welding where necessary. |
| 25 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 26 | Cement Concretc with 2cm gauge approved stone ballast coarse sand and cement in proprotion 1:2:4 including supply of all materials labour T & P etc.required for proper completion of the work . |
| 27 | Mild Steel or iron in plain work such as reinforced concrete or reinforcement brick work (when not included in an over all rates) wrought to required shape as necessary including benefit for proper completion fo the work and including supply of all steel and wastage and over lappign and hooks. |
| 28 | Concretc with 4cm gauge brick ballast garse sand and cement in proprotion 12:6:1 in foundation and under floor including supply of all materials labour T & P etc.required for proper completion of the work . |
| 29 | R.C.C. work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:1.5:3 in in lighter beam ,i.e. havings span upto 6 m. excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I. binding wire and including necessary crentering & shuttering etc. and also including supply of all material labour and TSP etc. required for proper completion of the work, binding wire cost being included in the item. |
| 30 | R.C.C. work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:1.5:3 in R.C.C column. excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I. binding wire and including necessary crentering & shuttering etc. and also including supply of all material labour and TSP etc. required for proper completion of the work, binding wire cost being included in the item. |
| 31 | R.C.C. work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:1.5:3 in in slabs . excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I. binding wire and including necessary crentering & shuttering etc. and also including supply of all material labour and TSP etc. required for proper completion of the work, binding wire cost being included in the item. |
| 32 | 15 mm cement plaster with cement mortar in proportion 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80 mm in girth and finished even smooth .thick plaster mix 1:4 (1 cement :4 coarse sand) etc |
| 33 | Supply & filling of brick bats sor knp chp 01 s.i.2©. |
| 34 | Supply and fixing of 4cm (3/2\") thick C.P. Teak wood door and window shutters with panels of heavy quality galvanized iron wire gauge 2.5min or 2mm or 1.5mm (1/10 or 1/12 or 1/6 inch) mesh or any other size with necessary beading including supply and fixing of wooden cleats and stops and including fixing and adjustment of hinses, bolts, locks, handles, springs and/or other fitting but excluding their supply and including painting with two coats of Black Japan on all iron fittings if necessary. Fitting with necessary screws to be supplied departmently |
| 35 | 6 mm ceiling cement plaster of mix : 1:3 (1 cement : 3 fine sand) including cost of all chipping of rcc surface before ceiling plaster . The cost of including all materials labour t& p and scaffolding etc. |
| 36 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 20 mm dia (heavy type) |
| 37 | Providing and fixing 110 mm dia pvc pipe for rain water supply including necessary T&P and as per incharge . |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes |
| 39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia Pipes |
| 40 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes |
| 41 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 42 | Providing and fixing PTMT stop cock of approved quality and colour Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms |
| 43 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball . 20 mm nominal bore, 120 mm long, weighing not less than 198 gms |
| 44 | Providing and fixing uplasticised PVC connection pipe with brass unions. 45 cm length 15 mm nominal bore |
| 45 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 46 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete . Flexible pipe 32 mm dia |
| 47 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 48 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore |
| 49 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 50 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank . |
| 51 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Please Enable Macros to View BoQ information |
