|
| 1 | Dismantling of brick work or stone/boulder masonry built in cement mortar or cement lime mortar, complete all as specified and directed. |
| 2 | M&L brick work with sub class `B\" bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 3 | All as per item No. 2 above but exceptbricks. |
| 4 | M&L Pre-cast cement concrete block masonry with solid blocks, with 390x190x190mm size, exc. 10 cm in width Type C-1 (1:3:6) and setting in mortar 1:4, complete all as specified and directed. |
| 5 | Dismantling plain or corrugatedsteel sheeting, any gauge, thickness, including Nainital or similar patteren roof coverings including scafoldings of any hieght, complete all as specified and directed. |
| 6 | Supply & fix Pre-painted galvalume aluminium zinc coating GI based trapezoidal/mangalore tile profile roofing sheets, chajjas,0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively, profile hieght 28.50 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufactureron wooden/steel membersincluding scafoldings of any height of the bldg, complete all as specified and directed. |
| 7 | Supply & fixPre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any hieght, complete all as specified and directed. |
| 8 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 9 | S&F for joist, channel, angle or tee sections or MS Flats fixed independantly without connecting plates,etc Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of lengthindicated) as in frame work for Galvalume / CGI chajjas, complete all as specified and directed. |
| 10 | Dismantling of framed work timber scantlings 40 sqcm and over in section, in any position, complete all as specified and directed. |
| 11 | Material and labour in repair to replace old decayed timber (including piecing, scarifying, etc of old and mew timber if required) second class hard wood clean sawn in scantlings timber framed and fixedin any position and description including scafoldings of any hieght, complete all as specified and directed. |
| 12 | Supplied and fixed in repairs to replace old or decayed boarding in patches including cutting out old,piecing, heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any hieght, complete all as specified and directed. |
| 13 | Taking down cement plaster of any description on brick or stone walls etc incl raking out joints hacking for key scrubbing down with water and removing debris outside MD land upto 04 storeys buildings, complete all as specified and directed. |
| 14 | Material and labour for 15-20 mm average thick Ready Mix Plaster in multy layer of make / brand - ACC\"s Accoplast / CK Birla\"s Aerocon /mixed withliquid water proofing compound on other than fair faces of brick wall or concrete surfaces,including use of scaffolding, complete all as specified and directed.Note: Liquid water proofing compound will be measured and paid seperately as supply only.Name of Manufacturer: M/s ACC acopalst/CK Birla Aerocon/ M/s Ultratech Cement Ltd. |
| 15 | M & L for 10 mm-12 mm Thick ready mix plaster in single layer on brick wall or concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces (internal surface) and finished even & smooth witjhout using extra cement, complete all as specified and directed.Name of Manufacturer: M/s ACC acopalst/ CK Birla Aerocon/ M/s Ultratech Cement Ltd |
| 16 | Supply only liquid water proofing compound, complete all as specified and directed. |
| 17 | M & L for preparing old/new plastered surfaces of externalwalls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic)Apex Ultima Protek of Asian Paint or equivalent make over a coat of primer including use of scaffoldings, complete all as specified and directed. |
| 18 | M&L for preparation of newly plastered surfaces of walls and applying two coats Plastic emulsion paint over a coat of birla putty (avg 2 mm thick), complete all as specified and directed. |
| 19 | M&L for preparation of newly plastered surfaces of walls and applying two coats Oil based distemper over a coat of alkali resisting priming paint over 1 mm thick (average) Birla white putty, complete all as specified and directed. |
| 20 | Materials and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant primingpaint over 1mm thick (average) Birla wall putty, complete all as specified and directed. |
| 21 | M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceiling in CM (1:3) and finished even and smooth without using extra cement, complete all as specified and directed. |
| 22 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats white washing including preparation, complete all as specified and directed. |
| 23 | M&L for preparation of old surfaces of walls andapplying two coats of oil based distemper over a coat of birla putty (avg 2 mm thick), complete all as specified and directed. |
| 24 | M&L for preparation of new steel surfaces of any description not otherwise described over 10cm in widht or girth and applying two coats of synthetic enamel paint over a coat red oxide, complete all as specified and directed. |
| 25 | M&L anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed. |
| 26 | Providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentrationfor post constructional Anti-termite treatment for treatment of soil under existing floors using emulsion at the rate of one litre per hole, 300mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor, complete all as specified and directed. |
| 27 | Providing and injecting chemical emulsion usingchlorpyriphos 20 percent EC with 1 percent concentartionfor post constructional Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 litre per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same, complete all as specified and directed. |
| 28 | S&F in repair curtain rod (decorative type) 20 mm dia stainless steel as approved by GE, complete all as specified and directed. |
| 29 | S&F curtain brackets decorative type (antique), for receiving single/double curtain rod,fixing for 20 mm rod, complete all as specified and directed. |
| 30 | S&F in repair PVC floor trap 100 mm bore outlet including provision ofjointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified and directed. |
| 31 | Demolition and breaking up drain pipes 100/110 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortarupto any heightincluding all scafloding arrangments, complete all as specified and directed. |
| 32 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes andfixed to walls upto any height including all scafloding arrangments, complete all as specified and directed. |
| 33 | S&Ffor 110mm bore PVC pipe stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stay to wall or roof, complete all as specified and directed. |
| 34 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture1.18 mm and fixed with stainless steel wire staples over wooden beading, complete all as specified and directed. |
| 35 | Supplied and fixed 110 mm bore bends (any radius), diminshing pieces or tapers (larger bore measured), complete all as specified and directed. |
| 36 | S&F in repair aluminium hydraullic door closer, right hand and left hand opening doors double speed adjustable closing and latching speed, suitable for door shutter 851mm to 1000mm in width and 61 to 80kg in weight, complete all as specified and directed. |
| 37 | S&F in repair mild steel 300mm ordinary rat tail rod pattern spring including roller plate, complete all as specified and directed. |
| 38 | M&L for Preparing old wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel painting, complete all as specified and directed. |
| 39 | M&L for Preparing old wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel painting, complete all as specified and directed. |
| 40 | Dismantling of ceiling board (Plup insulation or insulation etc) or insulation board any thickness including cover fillet/grid, complete all as specified and directed. |
| 41 | M&L for GI frame work for seamless ceiling 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.20m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, complete all as specified and directed. |
| 42 | Material and labour 8 mm thick Exposed metal frame ceiling with calcium silicateboard of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid(frame work for ceiling shall be measured and paid separately) fixed to aluminum frame work in ceiling and all other similar works, complete all as specified and directed. |
| 43 | S&F 3mm sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane including hacking out old broken glass panes from wooden frames, complete all as specified and directed. |
| 44 | S&F in repair plain, galvanised mild steel sheeting in valley gutters of thickness 0.63mm, straight flashing (length and girth as fixed), complete all as specified and directed. |
| 45 | S&F in repair POP false ceiling consisting of frame work made with 50 mm Sq MS tube of 18 G thickness as main runner at 600 mm c/c both ways suspended/supported with MS flats 25x4 from existing RCC slab including providing and fixing expended metal of size 5.25 mm x 1.25 mm thickness welded to main runnersand applying POP (calcium silicate semihydrate variety) to the expended metal of thickness not less than 10 mm finished smooth to line and level including necessary supports scaffolding etc as required and also including applying a coat of red oxide zinc chrome primerover the MS frame work and suspended, complete all as specified and directed. |
| 46 | Material and Labour for 25 mm thick 2nd class hardwood planed one side & edges tongued and grooved or rebated and fixed with nails as in wall panelling, complete all as specified and directed. |
| 47 | Supply and fixing Aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm c/c on exceeding columns/beam/ slab to holdcladding etc.and fixingAluminium composite panel cladding plain metallic of approved colour/ shade to beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour, complete all as specified and directed. |
| 48 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site, complete all as specified and directed. |
| 49 | M & L for machine cut, polished cudappah stone work 20 to 25 mm thick (table rubbed and polished) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in kitchen platform, flooringand all other similar works, including laying over 15mm thick cement mortar (1:6), complete all as specified and directed. |
| 50 | M&L for granite (of any approved colour) 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grindingand polishing as in kitchen platform, flooringand all other similar works, incl. moulding/rounding the edges of stone, laying over & including 15 mm thick cement mortar (1:6), complete all as specified and directed. |
| 51 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmglossy finish etc, complete all as specified and directed. |
| 52 | S&F in repair Stainless Steel Double Bowl Kitchen Sink made of stainless steel 1 mm thick 304 grade kitchen or laboratory with plugs, washers and waste pipe including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe, complete all as specified and directed. |
| 53 | Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore, complete all as specified and directed. |
| 54 | S/F GI tubing 15mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors, complete all as specified and directed. |
| 55 | Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore, complete all as specified and directed. |
| 56 | S/F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors, complete all as specified and directed. |
| 57 | S&F as in repair 15 mm bore fancy type sink cock (wall mounted) with 150mm (6\")long swivel spout, wall flange and provision for WP connection,cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 58 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises, complete all as specified and directed. |
| 59 | M&L Non Skid coloured ceramic tiles, 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick in (1:6)for laying floor finishes, complete all as specified and directed. |
| 60 | M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing shade of the tile, complete all as specified and directed. |
| 61 | M&LNon - skid Ceramic tiles 7 to 8 mm thick, light shade area of eachtile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of existing tile including Screed bed or bedding layer of mortar 15 mm thick in (1:6)for laying floor finishes, complete all as specified and directed. |
| 62 | As per item No. 61 above but in vertical surfaces like skirting, Dados etc. |
| 63 | M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes, complete all as specified and directed. |
| 64 | M&L glazed tiles digital coloured ceramic tiles 450/300/7 or 600x300x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match, M&L rendering 10 mm thick on fair faces of brick work in CM (1:4), complete all as specified and directed. |
| 65 | M&L Rendering 10mm thick cement mortal plaster 1:4 on fair faces of brick work or concrete surfaces, complete all as specified and directed. |
| 66 | M & L HI-Gloss digital ceramic tilestiles in vertical surfacetile of size 600mm x 1200mm 8 to 10thick set and jointed in neat cement slurry and pointed in white or coloured cement to match includingrendering 10 mm thick on fair faces of brick work in CM (1:4), complete all as specified and directed. Make : HR Johnson/Oriental bellceramic / Kajaria. Note : The above item will be executed by applying tile adhesiveof approved make and as per manufacture instruction. |
| 67 | S & F of 18mm thick UV coating, HDHMR board exterior grade, including acrylic high gloss sheet of 3mm thick over HDHMR board, anti fungal, moisture resistence,anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards etc. complete all as specified and directed by Engr-in-charge. NOTE:- Sample as approved by GE.Make:-Action Make: Tessa / Greenply / Century. |
| 68 | S & F of 18mm thick UV coating, MDF board exterior grade, Both side laminated with any colour anti fungal,moisture resistence, anti borer, as per IS 14587 for kitchen/Cupboards shelfs fixing with 1st class hard wood lipping/beading etc., complete all as specified and directed by Engr-in-charge. NOTE:- Sample as approved by GE.Make:-Action tessa/Greenply/ Century. |
| 69 | S & F in repairs of Partial overlay / fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/silver, complete all as specified and directed by Engr-in-charge.Make : Asian sleek or other equivalent make as approved by GE. |
| 70 | S & F in repairsof stainless steel cabinet / drawers handle having a length of 250mm and shape, complete all as specified and directed. |
| 71 | S & F in repairs of stainless steel modular thali-plate basket SS 304, size of 520x485x200mm,heavy duty and grade steelwith finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg, complete all as specified and directed. Make : Asian sleek or other equivalent make as approved by GE. |
| 72 | S & F in repairs of stainless steel modular perforated cutlery basket SS 304 size of 52 x 48.5 x 10 cm with heavy duty and grade steelwith finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg, complete all as specified and directed.Make : Asian sleek or other equivalent make as approved by GE. |
| 73 | S & F in repairs of stainless steel glass tray plate tray having length of 610mm, corrosion resistance telescopic drawer channel, complete all as specified and directed.Make : Asian sleek or other equivalent make as approved by GE. |
| 74 | S & F in repairs of stainless steel triple cutlery inserts having length of 500mm with telescopic drawer channel having weighing capacity of 6 kg, complete all as specified and directed.Make : Cat Part No-6408 of Godrej Kitchen appliances or other equivalent make as approved by GE. |
| 75 | S & F in repairs of stainless steel 304 grade, size 180x515x485mm pull out detergent rack having two shelves spaces with telescope drawer channel having weighing capacity of 6 kg, complete all as specified and directed. |
| 76 | S & F in repairs of stainless steel grain trolley SS 304 having size of 525x485x350mm, with heavy duty and grade steelwith finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg, complete all as specified and directed. Make : Cat Part No-6175 of Godrej Kitchen appliances or other equivalent make as approved by GE. |
| 77 | S & F in repairsof stainless steel slim Ergo single square rail 550mm anthracite finish with heavy duty and grade steelwith finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg, complete all as specified and directed.Make : Cat Part No-4340 of Godrej Kitchen appliances or other equivalent make as approved by GE. |
| 78 | Taking down Chowkhats or frames n exc 1.50 sqm each, complete all as specified and directed. |
| 79 | Taking down Chowkhats or frames exc 1.50 sqm and n exc 4.00 sqm each, complete all as specified and directed. |
| 80 | Taking down shutter of any descriptionarea exc 1.00 sqmandn exc 2.00sqm each, complete all as specified and directed. |
| 81 | Taking down shutter of any description arean exc 1.00sqm each, complete all as specified and directed. |
| 82 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19x19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed, complete all as specified and directed. |
| 83 | Supply & fixfactory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top andbottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile \"C\" channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer\"s instructions and drawings as shown in SSR Part-I 2009, complete all as specified and directed. |
| 84 | S&F in 125 mm Aluminium barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specified and directed. |
| 85 | S&F in 125 mm brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specified and directed. |
| 86 | S&F 300 mm long Aluminium, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and directed. |
| 87 | S&F 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and directed. |
| 88 | S&F in 100 mm Aluminium Butt hinges, with mild steel hinge pin, bright polished and fixed, type B-11 fixed, complete all as specified and directed. |
| 89 | S&F in 150 mm long brass handles, cast type, fixed, complete all as specified and directed. |
| 90 | S&F in repair 75 mm Mortice lock, vertical type of Aluminium of 4 lever, complete all as specified and directed. |
| 91 | S&F in in repair Aluminium drawer handles, projection drop (50mm to 65mm) on screwed plate, complete all as specified and directed. |
| 92 | M&L in repair for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. Note The item includes brackets, clamps and other similar small items, complete all as specified and directed. |
| 93 | M&L for 10 mm thick toughened glass as in any work including cutting to shape drilling holes reqd and with suitable bracket, complete all as specified and directed. Note:- The item includes the cost of itcheing. |
| 94 | M & L for preparation of old painted steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint (from five storeys to Eight storeys bldgs) including use of scaffoldings where required for external painting of steel surfaces, complete all as specified and directed. |
| 95 | S&F in repair vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets, complete all as specified and directed. |
| 96 | S&F in repair Brass CPpillar cock with extension body including all necessary fittingsscrewed down for iron pipe for Wash Hand Basin, complete all as specified and directed. |
| 97 | S&F in repair wall mixturer 3-in-1 system with provision for both hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs and wall flange (without hand an overhead shower), complete all as specified and directed. |
| 98 | S&F in repair 15 mm dia bore fancy type chromium plated long body bib taps with wall flange cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule, complete all as specified and directed. |
| 99 | S&F in repair in brass chromium plated towel rack with 3 hooks 18\" (Oval Range), complete all as specified and directed. |
| 100 | S&F in repair chromime plated, cast copper alloy jet spray with 1 mtr SS chrome plated hose and hook(for European seat), complete all as specified and directed. |
| 101 | M&L in repair single piece WC with PP thin rim seat cover white , fixing accessories, accessories set and cistern fitting size 665x355x770 mm and necessary fittings, complete all as specified and directed. |
| 102 | S&F for mirror cabinet PTMT of 400mm x 500 mm with megnetic looking arrangements fixed with and inclduling chromiplated brass screws and PVC rawl plugs, complete all as specified and directed. |
| 103 | S&F in repair vitreous China wash down water closet pan (pedestal pattern) white, including trap, connection to drain and flushing pipe including seat cover for pedstal pan, complete all as specified and directed. Make:-Jaquar/ Hindware /Cera/ Parryware, sample as approved by GE. |
| 104 | S&F as in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. Make:- Jaquar/ Hindware/Cera/Parryware and sample as approved by GE. |
| 105 | S&F as in repair 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. Make:- Jaquar/ Hindware/ Cera/ Parryware, sample as approved by GE. |
| 106 | S&F in repair sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed. Make:- Jaquar/ Hindware/ Cera/ Parryware, sample as approved by GE. |
| 107 | Supply and fixing in repair15 mm bore overhead rain shower, 200x200mm or 300mmx300mm size, single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 305mm mm long (light weight) square shape with wall flange, complete all as specified and directed. Make:- Cat part No F7010505AB & F7040104 of Cera or Jaquar/Hindware/ Cera/ Parryware, sample as approved by GE. |
| 108 | S & F powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame, complete all as specified and directed.Note : (i) Glass panes will be measured & paid separately.(ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips however it will be not be weighed and not paid separately.(iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. |
| 109 | M&L for 5.50 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskitin square exc 0.50 sqm in each pane frosted on one side, complete all as specified and directed. |
| 110 | S&F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples, complete all as specified and directed. |
| 111 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 112 | S&F solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications fixed, complete all as specified and directed. |
| 113 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and directed. |
| 114 | S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 15 mm size, minimum weight 142 grams, complete all as specified and directed by the Engineer-in-Charge. |
| 115 | S & F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm size, minimum weight 210 grams, complete all as specified and directed by the Engineer-in-Charge. |
| 116 | S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 25 mm size, minimum weight 690 grams, complete all as specified and directed by the Engineer-in-Charge. |
| 117 | S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 40/50 mm size, complete all as specified and directed by the Engineer-in-Charge. |
| 118 | Supply and fixing in repairs rotational moulded polyethylene water storage tanks of capacity 500 liters (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed. |
| 119 | Supply and fixing in repairs rotational moulded polyethylene water storage tanks of capacity 1000 liters (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed. |
| 120 | Supply and fixing in repairs rotational moulded polyethylene water storage tanks of capacity 2000 liters (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed. |
| 121 | Supply and fixing in repairs rotational moulded polyethylene water storage tanks of capacity 5000 liters (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed. |
| 122 | S&F in repairs CI colour black round shape with dia 450 mm double seal with locking arrangement for specially desgine with heavy duty for over head tank fixing in any any height, complete all as specified and directed by the Engineer-in-Charge. |
| 123 | S&F Pulley operated clothes drying system consisting of anodized Aluminium pipes, each of outer dia 22 mm and inner dia 19.8 mm. Pulleys made up of delrin with rope guide mounted on channel pair of length 24” (distance between two pipes is adjustable). Locking system to hide rope knot.Channel to be mounted or fixed with self-tapping screws provided in kit. Rope will be polyester braided undyed of 4mm dia (For 9 feet), complete all as specified and directed. |
| 124 | S&F Pulley operated clothes drying system consisting of anodized Aluminium pipes, each of outer dia 22 mm and inner dia 19.8 mm. Pulleys made up of delrin with rope guide mounted on channel pair of length 24” (distance between two pipes is adjustable). Locking system to hide rope knot.Channel to be mounted or fixed with self-tapping screws provided in kit. Rope will be polyester braided undyed of 4mm dia (For 7 feet), complete all as specified and directed. |
