Tender For Repairs To Walls, Floors, Water Fittings, Iron Maongry In Otm Bldgs Of Area A Under Ge (Central) Pune; 1 M&L for taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc. 1.5 Sqm but n.exc. 4 Sqm complete all as specified and directed. 2 M&L for taking down chowkats or frames with shutters (w/o taking of shutters from the frame) area n. exc 1.5 Sqm complete all as specified and directed. 3 M&L for taking down shutter of any description and removing frome site exc. 1 Sqm & n. exc. 2 Sqm each leaf complete all as specified and directed. 4 S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 5 S&F second class hardwoord, 30mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood article board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. 6 S&F 35mm thick second class hardwoord, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed. 7 S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. 8 S&F factory made solid panel door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. 9 S&F, powder coated anodised Aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 10 S&F powder coated anodised Aluminium window and ventilator shutters, fixed type without sash bar, Aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised Aluminium snap beading, screws etc. complete all as specified and directed. 11 S&F powder coated anodised Aluminium door shutters, Aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. 12 Supply only 5.5 mm thick sheet glass, selected quality, in square exc 0.5 Sqm each pane including solar control film 25 micron reflective type over it complete all as specified and directed. 13 S&F door closer (Aluminium extuded body section) hydreulically regulated, designation No 1 universal type, suitable for door shutters up to 700mm in width and of wieght not more than 35 Kg complete all as specified and directed. 14 S&F mild steel framed work such as grills, framed guard bars etc and similar work confirming to Fe-290, grade E-165 complete all as specified and directed. 15 Supply & fix 4.00 mm thick plain sheet glass, selected quality, in square n exc 0.5 Sqm each pane complete all as specified and directed. 16 Supply & fix 4.00 mm thick figuered sheet glass, selected quality, in square n exc 0.5 Sqm each pane complete all as specified and directed. 17 S&F 100 mm long mild steel but hinges medium weight colld rolld complete all as specified and directed. 18 S&F 150 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. 19 Supply and fix 150mm long extruded Aluminium alloy handles, 150mm long fabricated type anodised complete all as specified and directed. 20 S&F 300 mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alu alloy complete all as specified and directed. 21 Supply and fix in repairs floor door stopper of Aluminium body and tongue anodised with hard drawn steel spring fixed in floor over all length of cover plate 150mm complete all as specified and directed. 22 S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 23 Supply & fix in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 24 Supply and fix repairs decorative type curtain rod, stainless steel, 25 mm dia with not less than 1mm wall thickness including decorative bracket complete all as specified and directed. 25 S&F 3 mm thick plain/frosted sheet glass ordinary quality & glazing with oil putty in squares n. exc. 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed. 26 M&L for two coat of synthetic enamel painting to wooden surfaces (frame & shutter) over a coat of primer incl preparation of wooden surface.Surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and directed. 27 M&L for two coat of synthetic enamel paint on steel surfaces over one coat of zinc primer including preparation of new steel surfaces exceeding 10 cm width or girth complete all as specified and directed. 28 S&F 18mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces, fixed with screws to timber frame work complete all as specified and directed. 29 S&F 18mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, one side white lamination fixed with screws to timber frame work complete all as specified and directed. 30 S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps (when open) 30 mm complete all as specified and directed. 31 S&F ball catches with 8mm dia steel ball, and Brass body and striking plate including letting in and fixed complete all as specified and directed. 32 Supply and fix extruded Aluminium alloy handles, 100 mm long fabricated type, anodised complete all as specified and directed. 33 M&L for taking down cement plaster on stone/Brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. 34 M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces (1:6) finished the surface even and smooth without extra cement complete all as specified and directed. 35 M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4), the surface even and smooth without extra cement complete all as specified and directed. 36 M&L for two coats of oil bound distemper over a coat alkali resistent primer to newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed. 37 M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a alkali resistent primer complete all as specified and directed. 38 M&L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 39 M&L for colored joint free non skid ceramic/matt finish tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match, including 15 mm thick screed bed or bedded layer in cement mortar 1:6 for laying floor finish complete all as specified and directed. 40 M&L for colored glazed ceramic tiles/matt finish (300mm x450mm) x 7 to 8mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or colored cement to match including 10 mm thick backing coat in cement mortar (1:4) on brickwork or stone masonary surfaces complete all as specified and directed. 41 M&L for any shade, vitrified ceramic tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set jointed and pointed in white or coloured cement to match the colour of tiles with screed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed. 42 All as per srl item No 41 above but as in skirting over & including 10mm thick backing coat of CM 1:4 on concrete or cement plaster surfaces complete all as specified and directed. 43 M&L for dismantling of stone slab in any description or thickness, laid bedded jointed in any morter complete all as specified and directed. 44 M&L for granite (of any type) 18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed. 45 M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab ncluding rubbing and polishing complete all as specified and directed. 46 M&L for drilling holes for bolts, pipes, etc. n. exc 25mm dia in granite or trape stone for gas connection pipe complete all as specified and directed. 47 M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed. 48 S&F vitreous china wash down water closet coloured pan (pedestal pattern), white complete connected to drain fixed in repair complete all as specified and directed. 49 Supply and fix in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests complete all as specified and directed. 50 S&F oval shaped vitreous china, under/over counter WHB, snow white, fancy type of overall size 560 x 470 mm fixed in repairs including 15 mm pillar cock cast Copper alloy CP, 15mm cast Copper stop valve, 32 mm Brass CP waste fitting incl waste pipe & 15 mm PVC connection pipe 450 mm long complete all as specified and directed. 51 S&F in repairs plastic water closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed. 52 S&F in repairs PVC flushing cistern 10 ltrs capacity ISI marked incl PVC down pipe and connection etc all complete all as specified and directed. 53 S&F for stop cock Copper alloy CP screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union and fixed 15 mm bore in repairs complete all as specified and directed. 54 S&F in repairs bib taps cast Copper alloy with crutch or butterfly handle, chromium plated fancy type screwed down, screwed for iron pipe or for Brass ferrule complete all as specified and directed. 55 S&F in repairs CP health faucet spray with 1.5m long pipe with wall hook & fixed in repair complete all as specified and directed. 56 Supply and fix in repairs bib taps two way type, cast Copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for Brass ferrule 15 mm bore and fixed complete all as specified and directed. 57 Supply and fix 15mm bore pillar taps of cast Copper with capstan head CP screwed down high pressure with or without lettered hot and cold with long screwed shank and fly nut for iron pipe and fixed in repairs complete all as specified and directed. 58 S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. 59 S&F PVC connections 15 mm size with PTMT nuts to length 450 mm in repairs complete all as specified and directed. 60 S&F Brass, chromium plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. 61 Supply and fix in repairs Brass chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. 62 S&F 600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated Brass screws and cup washers complete all as specified and directed. 63 M&L for taking down steel tubing and connections including cleaning for refixing or removal to store of 15 mm bore complete all as specified and directed. 64 M&L for taking down steel tubing necessary fittings connection etc for 20 mm bore pipe complete all as specified and directed. 65 M&L for cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick work or stone masonary walls complete all as specified and directed. 66 Supplying and laying 15mm bore of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all required fittings complete all as specified and directed. 67 S&F 20mm dia, UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, any type of pipe complete all as specified and directed. 68 Supply and fix PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement 75 mm dia out let complete all as specified and directed. 69 S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm dia incl required clamp arragement complete all as specified and directed. 70 S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75 mm dia incl required clamp arragement complete all as specified and directed. 71 S&F PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed. 72 S&F PVC (SWR) bends of 75mm dia, any radius complete all as specified and directed. 73 S&F PVC (SWR) vent cowl, 100 mm dia complete all as specified and directed. 74 S&F sinks made of stainless steel of 1 mm thick kitchen sink with plug washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 x 420 mm bowl size 410 mm x 330 mmx 160 mm complete all as specified and directed. 75 S&F rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position all as specified in SSR Pt-I, 500 litre capacity, including dismantling water tanks & removing from site, capacity of tanks exc 250 litres & n. exc. 500 litres capacity each complete all as specified and directed. 76 All as per srl item No 75 above but exc 1000 ltr capacity. 77 S&F false ceiling using non asbestos (Fiber cement) decorative tiles of size 595mm x 595mm x 4mm thick including GI snap grid of size (600mmx60mm) using hot dipped galvanised steel section, exposed surface with pre-coated capping main Tee of size 24 x 38mm x 0.5mm thick at every 1200mm center to center maximum and rotary stitched cross tee of size 24mmx32mm x 0.5mm thick at 1200mm center to center and wall angle of size 19 x 19mm x 0.5mm thick fixed to the periphery of the wall. The above grid is suspended at every 1200 mm center to center in both directions using 2.0mm thick pre-straightened GI wire on main runners including making niches for fans/light complete all as specified and directed. including dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. 78 M&L for preparation of old distempered surfaces of wall including washing rubbing down and stopping distempered surfaces by means of machine i.e smart periodical method and applying one coat of oil bound distemper (White or tinted) on walls complete all as specified and directed. 79 M&L for preparation of old decorative surfaces of ceiling incl, cornices (plastered or unplastered) by brooming down and scrapping wherever necessary by means machine i.e smart periodical method and applying one coat of oil bound distemper on ceiling complete all as specified and directed. 80 M&L for complete removal of existing treatment by means of machine i.e smart periodical method and applying thin layer wall care putty and applying two coats of oil bound distemper on walls complete all as specified and directed. 81 M&L for complete removal of existing treatment means of machine i.e smart periodical method and applying two coats of oil bound distemper incl one coat of primer on walls complete all as specified and directed. 82 M&L for preparation of old decorative surfaces means of machine i.e smart periodical method and providing two coat of weather proof exterior emulsion paint on walls complete all as specified and directed. 83 M&L for preparation old stone surfaces, applying coat of hydrophobic Solvent base silane – siloxane with a very high degree of penetrative action having Bond Adhesion of Min. 1.6 Mpa which prevents dirt, chloride, carbonation, and water penetration and Providing and applying Elastomeric, Anti carbonation, Anti corrosive, UV resistant, Solvent based Pure Aliphatic Acrylate System APCOREP MONOPOL on the concrete surfaces having Electrochemical impedance of 10 Ω in 3% Nacl AC impedance test, shall reduce chloride ion penetration by 91% and achieve dry film thickness of minimum 200 microns in a primer coat followed by two top coats using brush or spray after cleaning & removal of oil, grease or loose particles from the surface complete all as specified and directed.Note :- (a) Hight of building where abvoe specified item to be carried out s exc 11 mtr not exc 15 mtr, contractor is to make necessary scafolding arrangement is deemed to be included in quoted rate. (b) the old surface should be cleaned with pressure jetting to get original texture of stone surfaces. (c) the fungus or algae portion of stone wall surfaces shall be cleaned with chemical or water to obtain texture of stone surfaces. (d) the joint of old stone masnory surfaces wherever necessary or directd by engr-in-charge to be filed with cementious based polymer morter, deemed to be included quoted rate. 84 M&L for mirror polishing on old terrazo tiles/marble/granite/Kota stone/stone work where ever required to give high gloss finish complete all as specified and directed. 85 M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6, including dismantling of PCC solid block walling and stone masonary or brick masonary complete all as specified and directed. 86 M&L for demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced complete all as specified and directed. 87 M&L for 75mm thick PCC (1:4:8) type C2 (using 40mm graded aggregate) as in sub base/flooring/paving complete all as specified and directed. 88 M&L for plain cement concrete 1:2:4 Type B1 using 20 mm graded aggregate as in benching/kerbing or surface channel etc complete all as specified and directed. 89 M&L for 50mm thick PCC (1:3:6) type B2 (using 20mm graded aggregate) as in plinth protection/hard standing, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. 90 M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 300 x 300mm x 20mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed. 91 M&L for brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and directed. 92 M&L for rendering 15 mm thick in cement motor 1:3 with using water proofing compound surface finished even and smooth without using extra cement complete all as specified and directed. 93 M&L for applying coat of industrial bitumen 85/25 at the rate of 1.20 kg/sqm including cleaning the existing plaster/concrete surfaces of sunken portion complete all as specified and directed. 94 M&L for PCC 1:5:10 type E2 as in filling under floor complete all as specified and directed.
