|
| 1 | Taking down carefully copper/aluminium point wiring (light,fan socket or power ) point complete,including fixtures and fittings such as switches, ceiling rose, pendents, regulators, sockets, tube light fitting,main switch,MCB and DB\"s etccomplete all as specified anddirected. |
| 2 | Materialand labour for point wiring in repair complete with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990 unsheathed, concealed wiring multistranded,single core, copperconductor cable 1100 volts grade colour code cablesdrawnthroughand including PVC conduit size not less than 25 mm dia medium grade such as Tee ,Corner, overlaping connector etc.along the concealedinwalls/roofs/ ceilings/floors etc including concealed PVC box for fixing of and including modular plate as per no of switch modules flush mounted suitable for fixing modularswitches , sockets,fan regulators etc. including modular plate coverof required size with necessarystainless steel cadmium platedscrews andincluding 1.5 Sqmm PVC insulated, multistranded, FRLSH type,unsheathed (Green colour),single core, copper conductor cable as earth continuity conductor andconnecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed for One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board . |
| 3 | One light point / fan point controlled by one switch. |
| 4 | One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board . |
| 5 | One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size |
| 6 | All as per item No.2 above, but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switchon independent board. |
| 7 | Supply & fixing modular type switch 6 Amps ,1way,1 module. |
| 8 | Supply & fixing modular type switch 16 Amps ,1way,1 module . |
| 9 | Supply & fixing modular type socket 6 Amps, 2/3 Pin combined 2 module . |
| 10 | Supply & fixing modular type socket 6 A/16 Amps, 6 Pin combined 2 module. |
| 11 | Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body |
| 12 | Supply &fix modular type fan regulator stepped type 120 W- 2 module. |
| 13 | Taking down existing tube light fitting, ceiling light fitting of any type/make complete andreplacing of bipin holder,starter, connector etc andfixing back in existing or other place by providing PVC square box -02 Nos,tube rod and adequate length of three core flexible copper cable 0.75 sqmm from ceiling rose to fitting. |
| 14 | Supply and fixing LED lights fitting 1x 22W, 220V, 4\" long AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 15 | Supply and fix LED tube light along with fixture,10 watts |
| 16 | Supply and fix for telephone cable of size 0.5 mm of two pair type-solid annealed copper polythene insulated sheathed drawn through and including steel conduit medium grade with conduit accessories concealed in wall/roofs/floors/beams/columns etc and making connections on both sides complete all as specified and directed. |
| 17 | Supply and fix for telephone socket/jack with shutter including pressed steel sunken box concealed flush mounting with 3 mm thick hylam sheet top cover complete all as specified and directed. |
| 18 | S & F triple pole & neutral, double door, 6-way metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for FPRCCB / RCBO / Isolator / MCB as incomer and SP MCBs as outgoing, reversible metal door, 200 A copper busbar for each phase, fully insulated & shrouded neutral bar, earth bar, wireset & cable ties for cable management, prefitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed by engineer-in-charge. |
| 19 | S&F in replacement of sheet metal enclosure MCB SPN DB 8 Way type240 volts Double Doorwith magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed by Engineer in charge |
| 20 | S&F in replacement of sheet metal enclosure MCB SPN DB 4 Way type240 volts Double Doorwith magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed by Engineer in charge |
| 21 | Supply and fix for MCB FP 40 Amp 10 KA \"c\" series complete all as specified and directed. |
| 22 | Supply and fix for MCB SPN 20to 32 Amp 10 KA \"c\" series complete all as specified and directed. |
| 23 | Supply & fix for MCB SP 6 to 32 Amps 10 KA,\"C\" seriescomplete all as specified and directed. |
| 24 | Supply and fix of metalclad plug and socketwith MCB SP 32 Amps, 10KA C \"series,240 Volts. |
| 25 | Material and labour for submain wiring along with earth wire using 2 X 4.0 sq mm(colour coading) + 1X4 sq mm earth wire(green colour) of single core PVC insulatedmultistranded copper conductor1100 Volts grade FRLSH type in and including PVC casing capingcompleteall as specified |
| 26 | Material and labour for submain wiring along with earth wire using 2 X 6.0 sq mm(colour coading) + 1X6 sq mm earth wire(green colour) of single core PVC insulatedmultistranded copper conductor1100 Volts grade FRLSH type in and including PVC casing capingcompleteall as specified |
| 27 | Taking down and refixing of ceiling fan 1200mm sweep to 1400mm sweep of any make from its existing position after disconnecting of electric connection for carrying out repairs including servicing, overhauling, greasing etc after cleaning the body capacitor, holder, terminal adaptor, screws, nuts and washers etc replacement of spare parts/accessories such as ball bearings, gun metal bushe, capacitor, conopy top and bottom shackle clip assembly, rewinding of fan motor, painting andincluding hanging / fixing back in existing location and making cable connections and testing for its satisfactory performance complete all as specified and directed. |
| 28 | Supply and fix exhaust fanAC single phase 230/240Volts of size 300 mm sweep with louver. |
| 29 | Taking out window/split type AC of capacity 1.5/2.0TR, opening of the same and checking / detecting the fault and carrying out necessary repair and replacement of unserviceable spare/parts as required to make it operational, reassembling and refixing the unit to its position complete all as specified and directed. Note:- (a) The labour cost for replacement of spares/parts shall be deemed to be included in this item.(b) The rates shall be inclusive of transport from the site to workshop and vice versa before and after the repair. |
| 30 | Supply and fix down rodmade of MS pipe mediun grade 15mm dia of 60cm long duly predrilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan complete all as specified and directed. |
| 31 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with all accessories and necessaryfixing arrangementon wall at any height includingthree core 0.5 sqmm copper cable from connector to fitting and removing old unserviceable item complete all as specified and directed. |
| 32 | Supply and fixGI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces. The bracket pipe shall be welded to the MS stripof size 32mmX 5mm thick at three placesfor purpose of giving strengthening to the bracket pipe and fixing with necessary suitablenuts,bolts & washers and removing of old unserviceable item complete all as specified and directed.Make of GI pipe:- Jindal/Tata/BST |
| 33 | Supply and fix in repair single phase digital pump starter control panel of suitable 1.5 HP capacity complete all as specified anddirected. |
| 34 | Cutting the existing surfaceof wall on brick/stone masonaryfor making round holeat any height suitable for fixing 380/300 mm sweep exhaust fan andmaking good the distrubed surfaceand matching with existing surface complete all as specified and directed. |
| 35 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.Make: Racold/Usha/Bajaj |
| 36 | Supplying and laying of Heavy duty Stainless steel connection Pipe, 36 inch and of suitable diameter to carry both hot/cold water as inlet and outlet pipes for Geyser connections complete all as specified and directed. |
| 37 | Earthing complete with galvanisedsteel earth plate electrode60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion |
| 38 | Taking down Chowkhats or frames (without taking off shutters from frame) exc 1.5 sq.m but n exc 4 sq.m each |
| 39 | Taking down Chowkhats or frames (without taking off shutters from frame) n exc 1.5 sq.m each |
| 40 | M&L for preparation of old decorated surfaces and applying two coats of white wash on walls complete all as specified and as directed. |
| 41 | All as per above item above but in ceiling surfaces. |
| 42 | M&L for complete removal of existing treatment and preparation of surfaces including filling of the holes/cracks on walls with plaster putty and applying two coats of oil bound distemper paint on walls over a coat of alkali resistant primer, applied over 3mm wall care putty etc complete all as specified and as directed . |
| 43 | M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/ 10sqm) applied over 3mm external wall care putty including complete removal of existing treatment all as specified. |
| 44 | M&L for preparation of oldpainted wooden surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 45 | M&L for preparation of old painted steel surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 46 | M&L for complete removal of existing APP treatment on roof surfaces and disposing them off the premises all as directed. |
| 47 | M&L for Rendering 10mm thick in Cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement), mixing with water proofing compound all as specified. |
| 48 | Supply only integral waterprofing compound |
| 49 | Supply and Application of 5 Layer SHR Waterproofing Coating System as per manufacturer application procedure on leaking concrete roof surface by thorough surface preparation with high pressure water jet, having a pressure of min. 125 bars, followed by (a) Opening the cracks, and application of one absorption coat of nano-tech enhanced elastomeric waterproofing (NEEWP) emulsion having UV resistance having min. 50% solids, filling and sealing the cracks, (b) Over coating with 2 Coats of NEEWP + Cement mixture as waterproofing coat having +450% Elongation followed by curing. (The surface is then to be tested for water tightness with ponding test for min. 2 days) (c) Top-coated with 2 Coats of SHR Coating - pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) confoRming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa The material must have passed 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matty finishing, Thickness shall not be less than 120 microns using brush, roller, airless spray gun as applicable. The product should be certified by NABL Approved Lab and application is to be done by company approved applicator only |
| 50 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 51 | Providing and fixing factory made uPVC white colour Sliding window Three track Area exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 52 | M&L for Figured glass 5mm thick, pin head type and glazing with oil putty in squares exc 0.5 sq. m in eachpane |
| 53 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed. |
| 54 | M&L 10 mm thick Screed bed or beddding layer of CM 1:4 over 20mm thick PCC 1:2:4 (12.5mm graded aggrgate) in for laying floor finishes. |
| 55 | S&F for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured to match coloured tiles including dismantling of old tiles and cement mortar complete all as specified and directed. |
| 56 | M&L for Glazed ceramic coloured tiles in vertical surface 300 X 600mm size of double charged or ultra charged set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick backing coat 1:3 including dismantling of old tiles and cement mortar all specified and directed. |
| 57 | S&F for vitrified coloured tiles of 9-10 mm thick (square / rectangular) area of each tiles not exc 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured to match coloured tiles including dismantling of old tiles complete all as specified and directed. |
| 58 | All as per item above but on vertical surfacessuch as skirting / dadosincluding 10 mm thick rendering in CM (1:3) as in backing coatincluding dismantling of old tiles complete all as specified and directed. |
| 59 | M&L for Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 60 | S&F 30mm thick Flush shutters,solid core construction,with block board core and plywood face panels,commercial type on both sides etc complete all as specified and as directed . |
| 61 | S&F 30 mm thick 2nd class hard woodglazed and skelton shutters openrebated and prepared to receive glass and gauze etc but divided into squares with plain ,chamfered or rounded, metred and rebated sash bars any numbersas specified in SSR part I section 8 , clause 8.24 (a) to fitted to chowkhats. |
| 62 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed. |
| 63 | S & F stainless steel butt hinges medium weight 75 mm size in any position all as specified and as directed. |
| 64 | S&F aluminium anodised barrel tower bolt of extruded section 200 mm long fixed in any position etc complete all as specified and as directed. |
| 65 | S&F extruded aluminium alloy handle fabricated type anodised 150 mm long fixed in any position etc complete all as specified and as directed. |
| 66 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300mm long and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedfixed in any position etc complete all as specified and as directed. |
| 67 | M&L for preparation of new wood surfaces of any description exc 10cm width or girthand applying two coats of synthethic enamel paint over a coat of pink primer etc complete all as specified and as directed. |
| 68 | S&F in repairs standard size EWC white colour with P/S trap white coloured with and including PVC white colouredseat cover including alland connecting to flushing cistern complete all as specified and directed. (Cat part: S1053121 of Cera or equivalent) |
| 69 | S&F in repair vitreous china WHB flat back size 550x400 mm& supply only pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes including cutting for and pinning in ends of CI brackets and making good wall or floor fitting to match existing complete all as specified and as directed. (Cat part: S2020137 of Cera or equivalent) |
| 70 | S&F in repairs 10 ltr capacity low/high levelPVC flushing cistern with and including syphon assembly handle, ball valve, PVC inlet and out let pipe complete all as specified and directed. |
| 71 | S&F in repairs for Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) (Cat part: S4020107 of Cera or equivalent) |
| 72 | S&F repair fancy type chromium plated brass (long body)bib tap 15mm complete at any position etc complete all as specified and as directed. |
| 73 | S&F in repairs 15mm size Stop Valveschromium plated screwed down high pressure with crutch or butterflyhandle screwed both ends etc complete all as specified and as directed . |
| 74 | S&F in repairs 15mm size Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixedcomplete all as specified and as directed. |
| 75 | S&F in repairs Health Faucet with 1 meter CP flexible tube & hook and with all necessary fittings etc complete all as specified and directed. (Make: Prayag) |
| 76 | S&F in repairs 2 way bib cock double handle with flange and all necessary fittings all as specified and directed. |
| 77 | S&F in repairs 450 x 600mm bevelled edged mirror of selected glass 5mm thick mounted on PVC back frame for hinging with chromium plated brass screws and cup washers complete all specified and directed. |
| 78 | S&F in repair D type towel rail 600mm long PTMT fixed with and including chromium plated brass screwes and wooden/plastic cleats complete all as specified and directed. |
| 79 | Supply and fix in repair PVC seat cover for EWC white in colour, solid body, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed. |
| 80 | S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union 15mm bore complete all specified and directed. |
| 81 | S&F in repairs bathroom shelf of PTMT fixing with and including chromium plated brass screws and wooden plastic cleats (minimum weight 300gms) to plastered/tiled walls etc complete all as specified.(Make: Prayag) |
| 82 | S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified. |
| 83 | S&F in repairsgrating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed. |
| 84 | S&F in repairs waste coupling 32mm brass chromium plated ISI for WHB/sink complete all as specified and directed . |
| 85 | S&F in repair white colour PVC drain pipe long socket waste pipe for wash basin / kitchen sink water outletcomplete all as specified and directed. (Make: Prayag) |
| 86 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 87 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed by Engineer -in-charge |
| 88 | Taking down cement plaster on brick masonry walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water and removal of debries out side from MD land etc complete all as specified and directed. |
| 89 | M&L forCement concrete in foundations, filling and mass concrete type D2 (1:4:8) in foundations of bed of drains, filling and mass concreteall specified and directed. |
| 90 | M&L for Pre-cast cement concrete Type C1 1:3:6 (20mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4, complete |
| 91 | M&L for Rendering 10mm thick in Cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) |
| 92 | Taking down GI tubing and connection 15mm dia including cleaning of serviceable pipe for reuse and removal of unserviceable tube from work site all as directed. |
| 93 | S&F15 mm dia bore medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed. |
| 94 | Taking up or down 20 mm bore diaSteel Tubing and connecions fixed to wallsor laid in floors/ trenches etc complete all as specified and directed. |
| 95 | S&F 20mm dia bore medium grade galvanised steel tubing with all fittings fixed to walls, ceilings or laid under floors complete all as specified and directed. |
| 96 | S&F PVC connections 15mm size with PTMT nuts of length 300mm |
| 97 | M&L for Hardcore of broken stone of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface all as specified and directed by Engineer-in-charge |
| 98 | M&L for 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in sub base to pavement. |
| 99 | M&L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less |
| 100 | M&L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade \"A\" all as specified and as directed. |
| 101 | M&L for Providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) set in cement mortar 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces |
| 102 | M&L for TMT bars Fe 500 10mm dia and over cut to length bent to shape required including cranking hooking ends and binding with and including MS wire annealed not less than 0.9mm dia complete all as specified and directed. |
| 103 | S & F PVC Modular tensile sheet structure up to 1 mm thick of any color ( Colour will be approved by the accepting officer) having tear strength 520 N as in roof covering / cladding to wall fixed necessary arrangements as per manufatureres insttruction complete all as specified and directed. |
| 104 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 105 | S&F for Prelaminated particle board 12mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work |
| 106 | M&L for Providing and fixing factory made uPVC white color Sliding window Two track Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making rrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed(white powder coated), steel roller system including 5mm thick glazing with selected quality glass,aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.](Note: The unit rate quoted by contractor excludes cost of glass and includes all other connectedaccessories. Net opening will be measured for payment purpose) |
| 107 | Supply and fixing in windows 5.5mm thick Sheet glass, ordinary quality, in squares exc 0.5 sq. m each pane |
| 108 | S&F Solar control film 50 micron reflective type (gareware sun control or equivalent) |
| 109 | M&L for MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 110 | M&L for preparation of new or previously untreated steel Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats synthetic enamel paint over a coat of red oxide, zinc chrome all as specified |
