Tender For Supply, Installation, Testing & Commissioning Of 5 Mtr Height Decorative Pole Made Of Galavnised Mild Steel Pipe Duly Polyurethane (Pu) Paint Coated With 1 Mtr. Long Double Arm Designer Bracket Is Made Of Round Tube Conforming To Is 1161, 5Mtr Decorative Pole Made Of Galvanized Steel Pipes Fitted With Cast Iron Embellishment Polyurethane Paint Coated.Mfhd-200 A,Top Dia-76.1Mm,Bottom Dia-139Mm Base Dia-300X300x12mm(Including Single Arm Bracket) (Including Foundation Bolt 16X450x4nos) (Including Electrical Accessories)(Bakelite Sheet, Mcb, Chanel. Connector). The Pole(Od Of 114.3Mm And Thickness-3.6Mm) With Bracket Is Given Pre-Treatment And Finished With Pu Paint Giving It A Pleasing Appearance And Antique Finish. Pole Shall Be Available To Hot Dip Galvanize The Tube Before Painting. Foundation Bolt Size Shall Be 20X600x4nos. With Base Plate Size 300X300x12mm. A Door Is Provided Including Electrical Accessories (Connector, Bakelite Sheet ,Two Number Led Decorative Drop Down Light Made Of Aluminium Housing Fitted With Polycarbonate Diffuser 45W Size - 450X500mm And 6 Annual Periodical Maintenance Single Pole Mcb, Cable Looping Termional For 4X4/6Sqmm Copper Cable). Aluminium Casting In Golden Ring Form At Bottom, Middle, Top Of The Pole. The Pole Will Be Supplied With Brackets And Luminaire Combinations To Suit The Requirement. Branding Name Shall Be Embossed At The Bottom Near Junction/Mcb Box. Sticker Not Allowed In The Form Of Company Branding. Pole Shall Be Supplied With Outdoor Post Top Luminaire Of 70 Watt Ip67 Mounted In Suspension Type Having An Approximate Size Of 460Mm Outer Diameter And 635Mm Height, Housing - Aluminium With Designer Steel Aesthetic Crown, Optical Grade Opal Injection Moulded/Clear Polycarbonate Diffuser And Graphite Grey Uv Resistant Colour,Constant Current Electronic, Driver Provided With High Voltage ,Open & Short Circuit Protection And Ambient Temperature -10C To +40C. Supply 150V- 240V Power Factor 0.95 ,Thd = 20% Internal Surge Protection Of 4Kv With Following Specification Of Light Engine For 60W : 4800Lumens, Cct 3000K ±500 Cct ,Cri 70 And Lumen Maintenance Of L70 At 50000 Hours Ip 65 Connectors,Accessories Etc Complete With All Repects. Design Of Pole Should Be Such That It Should Maintains Proper Illumination On Both Side Along With Cement Bottaming (Complete Job). , Supplying, Instalaltion, Testing & Commissioning Of 1.1 Grade, 3X1.5Sqmm Frls Pvc Insulated Flexible Copper Conductor, Single Core Cable In The Existing Surface/Recessed Steel/ Pvc Conduit As Required. , Supplying, Instalaltion, Testing & Commissioning Of 1.1 Grade, 4X6 Sq.Mm Frls Pvc Insulated Flexible Copper Conductor, Single Core Cable In The Existing Surface/Recessed Steel/ Pvc Conduit As Required. , Supply, Installation, Testing & Commissioning 4Cx10 Sqmm 1.1Kv, Soild Aluminium Conductor,Xlpe Insulated, Pvc Sheathed, Armoured Extruted Pvc Type Grade As Per Is 7098 (Part I)1998 With Upto Date. , Supply, Installation, Testing & Commissioning 4Cx16 Sqmm 1.1Kv, Soild Aluminium Conductor,Xlpe Insulated, Pvc Sheathed, Armoured Extruted Pvc Type Grade As Per Is 7098 (Part I)1998 With Upto Date. , Supply, Installation, Testing & Commissioning Of 4Cx4/6/10Sqmm End Termination With Brass Compression Gland And Aluminium Lugs For Pvc Insulated And Pvc Sheathed/Xlpe Aluminium Conductor Cable 1.1Kv Grade As Required. , Earthing With G.I. Earth Pipe 4.5 Metre Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal/Coke And Salt As Required , Supplying And Laying 6 Swg G.I. Wire At 0.50 Metre Below Ground Level For Conductor Earth Electrode, Including Connection/ Termination With Gl Thimble Etc. As Required. , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. 32Mm Dia , Supply & Fixing Of 38Mm Dia Medium Class Hdpe Conduit Anlog With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. , Supply, Installation, Testing & Commissioning Of Feeder Pillar Panel (Outdoor Type) Made Up Of 2Mm Thick Sheet Steel, Compartmentalized Complete With Incomer Mccb (As Per Load )10 Ka - Fp, Aluminium Bus Bar Of The Required Rating, Specifications, Contactor And Timer Of Suitable Rating Of Reputed Make Complete With Mcbs-Sp-(5 To 32) Annual Periodical Maintenance As Required (C Curve) Including Cement Concrete Foundation/Platform For The Panel As Required. , Errection Of 11/0.433Kv, 3-Phase Pole Mounted Distribution Transformer 16Kva With Two Pole Structure Inclusive Lt Panel Of Suitable Capacity With Incomer And Required Outgoing, Trivector Three Phase Energy Meter Other Required Allied Works To Complete The Job. , Supply, Installation, Testing & Commissioning 35 Mm² Ab (Ht) Cable (3X35+1X70 Mm²) Xlpe(11 Kv, 3C + Earth) 1.1Kv, Soild Aluminium Conductor,Xlpe Insulated, Pvc Sheathed, Armoured Extruted Pvc Type Grade As Per Is 7098 (Part I)1998 With Upto Date Amendments , Providing And Fixing Of G.I Pipe Complete With G.I Fitting Excluding Trenching And Refixing Etc External Work 80Mm Dia Nominal Bore Lights. , Supplying And Making Straight Through Joint Wkith Heat Shrinkable Kit Includind Ferrules/Lugs And Other Jointing Materials For Following Size Of Pvc Insulated And Pvc Sheathed/ Xlpe Aluminium Conductor Cable Of 1.1 Grade As Required. 3X 35 Sqmm , Supplying And Making Straight Through Joint Wkith Heat Shrinkable Kit Includind Ferrules/Lugs And Other Jointing Materials For Following Size Of Pvc Insulated And Pvc Sheathed/ Xlpe Aluminium Conductor Cable Of 1.1 Grade As Required. 4X 16 Sqmm
