supply Of Materials For Construction Of Rc Road In Various Locations At. G.P.Sawargaon (Kale) Tq.Ner Dist.Yavatmal-Excavation64.01.01a1 -- Excavation in earth for all sorts of soil & silt, lime, shadu, sand/ grit, such types of strata including dressing and conveying the excavated material by head and upto a distance of 10m and laying or spreading or filling in furrahas in layers of 30cm thick upto lift of 1:50m as directed. (A) Excavation - (In General) Tribale janjati 2 Soling64. BDA.21.40 -- Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. 3 PCC64.BD.E.1.24.01 -- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.|. quality Artificial Sand 4 WEARING COAT64.1D.37.B.1 -- Providing and laying in situ cement concrete of grade M-20 of trap / granite / gneiss / quartzite / graded metal for RCC works of abutment, wing walls, returns, transition walls, columns, beams and slabs, diaphram walls, Road slabs trough (Box Culvert) trough for aqueduct, wearing coat, etc. with Batching Plant and Transit mixer including shuttering, scaffolding, placing, compacting, curing etc. complete with an initial lead of 5 Km. & lift of 1.5 m (B) M-20 (40 MSA) (Cement 6.08 bags/Cum) i) For Abutment, wing walls, returns, transition walls 5 LUMSUM MATERIAL64.Material -- Lum sum Material for all works. 6 RAINFORCEMENT64.Reinf -- Providing and fixing in position TMT FE 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc.as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. a) For TMT Fe 500 steel bars 7 Display Board / CIB 8 Worksite facilities/ Creche/ Drinking water/ FirstAid Please Enable Macros to View BoQ information
