|
| 1 | B&R PORTION:Demolition of cement concrete in ground floor and pavings n.ecx 15 cm in thickness below or above ground level & removing the rubbish out of MoD land complete all as specified and directed. |
| 2 | M&L for 75mm thick cement concrete type D-2, 1:4:8 (40 mm graded agg) as insub base complete all as specified and directed. |
| 3 | M&L for Italian marble with inlay flooring of approved sample in slab of 20mm (+/- 2mm) thick on upto 40mm thick white cement mortar bedding, joint shall be grouted with white cement paste pigmented to match shade of the marble. Marble shall be free from cracks. Flooring to be finished by tinoxide polished, pattern should be followed as per drawing following the inlay pattern i.e a polished finished pattern with a thickness varyingfrom 10 mm to 20 mm this work can feature items like mother of perl, semi precious stone or other marbel to create the design as specified and directed by engineer in charge. Marble honing and scrubbing with task 42 d machine with flexible diamond pad 200x to 6000x buffing the same surface to get mirror effect on floor. Analysing the quality of marble scrubbing with chemicals to make it dirt free, with 42 ds taski swiss made machine, Soaking the soapy dirty water with industrial vacuum cleaner, Clean the floor with soft water to remove the soapiness. Proper Marble cutting and mirror polishing work, proper boarder marking, make three nos of design (square & rectangular) pattern in centerwork to carried out as per instructions complete all as specified and directed by Engineer in charge. Note: Work shall be done as per picture attached |
| 4 | M&L for single pice/joint free Amber Onyx (Backlit) marble, translucent quality, allowing light to pass through and crete a war, glowing efffect with approved grained texture, premium astheick look (as per drg att) in vertical surface and like includingjointed with chemical on a specefix frame/wall suitable for fixing of LED strip lithg. The cutting and polishing and laying by hightly skilled labours colour and shade, sand blested cut into shape and size (Horizontal and vertical shape using and placed anchars clamps in CM (1:4),with WPC Frameas directed by Engr in charge shall be as per aproved by GE complete all as specefied and directed.Note: Work shall be done as per picture attached. |
| 5 | M&L for 16-18mmthick coloured granitestone work Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in Epoxy filling / white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite with all necessary moulding complete all as specified and directed by Engineer in Charge. |
| 6 | S&F in repair of 23-24mm thick PVC Jallies CNC machine cut as per the approved pattern and design as sample kept in GE Office. The PVC Jallies shall be fixed with the help of screw/nut bolt of suitable size and numbers as decided by the Engr-in-Charge. PVC Jallies shall be fixed to the existing steel frame work after replacing of rusted steelincluding necessary welding work with PU coating /paint complete all as specified and as directed by Engr in charge.Note : MS steel work will be measured and paid seprately. Make Rajshree/Echon or equivalent as approved by GE |
| 7 | Dismantling wrought iron or mild steel/ iron work of any description complete all as specified and directed. |
| 8 | S&F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410-W(GdeE- 250) quality A with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing including necessary double steel scaffolding where required upto two storey bldg complete all as specified and directed. |
| 9 | Taking down plastering on brick or stone walls, etc. incl racking out joints, hacking for key, scrubing down with water, etc.in cement or cement lime plaster, any description complete all as specified and directed. |
| 10 | M&L for 15mm thick Ready mix plaster (Make : Ultratech) on concrete surfaces on walls finished even and smooth complete all as specified and as directed by Engr-in-Charge |
| 11 | M&L for preparation of newly plastered surface of wall andapplying twocoat of weather proof exterior emulsionextra premium 100% acrylic emulsion as approved over a coat of primer complete all as specified and directed. |
| 12 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainlesssteel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 13 | E&M PORTION:S&F of exterior IP68 LED RGB/RGBW Flexible light strip of 5 mtr standard length with 10-15 Watt per meter which can be compatible with the DMX / Ethernet controller. Minimum System lumens of minimum 450 lumens/meter and System Lumen Efficacy > 30lm/w. Luminaire light beam spread - 110°, The Strip should have IP 68 protection and is offered IP 67 rated connector to join the LED Strips incontinuity. The luminaire must be offered with Aluminum channel for mounting the strip lights. The product should be complete with all accessories and Driver. The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance alone with CE certificate. The bidder shall upload the luminaire BIS certificate along with technical bid. The luminaire shall be supplied with necessary connectors for connecting lead/jump cables complete all as specified and directed. Make: Signify/Philips Cat. Ref. no: BGC301 RGB L5000 or equivalent of make as specified in PS. |
| 14 | S&F of Circular shape architectural RGBW (W=4000K) LED flood light with integral driver & housing made of Die-cast aluminium alloy.The luminaire shall be no bigger than Ø 135 X 141 (±10%) with bracket. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. The luminaire must have a breather gland. The nominal weight of the luminaire shall not be more than 1.8KG. The luminaire shall be equipped with high-power Cree, osram, lumiled or equivalent. The fixture shall have 45° beam angle (±10%) & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI ≥80 for white light & shall have SDCM≤4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage not exceeding 24W and system lumen output of not less than 970 lumens. Fixture shall operating temperature range of -40°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours at L70 @ 35deg. The luminaire shall have class I insulation.The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device.The luminaire shall give feedback on luminaire address & status (ON & Off). The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance alone with CE certificate. The bidder shall upload the luminaire BIS certificate along with technical bid. The luminaire shall be supplied with necessary connectors for connecting lead/jump cables complete all as specified and directed.Make: Signify/Philips Cat. Ref. no: BVP371 M 12LED 220V24W or equivalent of make as specified in PS. |
| 15 | S&F of Content Program Controller incluidng necessary control cables with features of Single DMX ports control minimum 300 light addresses, Works as a stand-alone or computer-driven controller, Secure Digital (SD) card drive for flexible show storage, USB 2.0 interface for downloading shows and configuring from attached PC,Flexible, adaptable mounting options ,Should be provided with light show authoring software, Direct line voltage power supports 100-240VAC,Minimum Five pre configurable effects :Using light authoring software to select from five pre-defined effects, adjust effect settings such as color, speed, and brightness. Soft Copy of Catalogues with Link of the official web page of Luminaries, Test Certificates - relevant BIS R Number, UL Certificates, Third Party IEC 60598 test certificates submission is mandatory complete all as specified and directed.Make: Signify/Philips Cat. Ref. no:iPlayer3 or equivalent of make as specified in PS. |
| 16 | M&L for Testing , commissioning & programming of the whole system all to the entire satisfaction of Engr-in-Charge complete all as specified and directed. |
| 17 | M&L for cable XLPE insulated screened PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of4 Sqmm 3 Core including laying/fixing on wall/floor with clip and trunch complete with thimbles complete all as specified and directed by Engr-in-Charge. |
| 18 | S&F MCB DBs Single pole with neutral, Sheet metal enclosures double door type, 240 Volts, with 200 Amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete without MCB and with enclosures blank plate for unused way suitable for 6 Way including cutting chases and making good to walls complete all as specified and directed.Make : Legrand/ L&T/ SchneiderNote: (a) Srl Item No 03.00 to 06.00, & 13.00 to 15.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. |
