|
| 1 | PART - A: Electrical works |
| 2 | Supply, Installation, Testing & Commissioning of following sizes of FRLS or FRLSH, PVC insulted multistranded copper conductor wire should be inline with the incoming phase colour, 1.1KV grade in existing surface/ recess/ PVC conduit, including floor cutting & refinishing the same by placing of all the accessories & lugs as per the requirement complete etc.,Make: Finolex/ Polycab/ RR kabel/ Havells |
| 3 | 1 Core x 2.5 Sq.mm for Lighting Power (1-ph) |
| 4 | Red/ Yellow/ Blue |
| 5 | Black |
| 6 | Green |
| 7 | 1 Core x 4 Sq.mm for UPS Power (1-ph) |
| 8 | Red/ Yellow/ Blue |
| 9 | Black |
| 10 | Green |
| 11 | 1 Core x 25 Sq. mm for Raw Power (3-Ph) |
| 12 | Red |
| 13 | Yellow |
| 14 | Blue |
| 15 | Black |
| 16 | Green |
| 17 | Supply & drawing of 1\" size PVC cum metalic flexible hose (Heavy duty) for wires with required all accessories etc., ISI marked |
| 18 | Supply & drawing of 1\" size PVC ordinary hose for wires with required all accessories etc., ISI marked |
| 19 | Supplying, fixing, testing and commissioning of the following suitable size modular type PVC box, plate, cover, switch, socket and connections etc., in the wall/ surface/ recess with wooden planks, including wood/ table cutting and making good etc., as required. Make: Legrand-Myrius/ Crabtree-Thames |
| 20 | 6 module PVC box with modular plate, cover in front on surface or in recess or in wooden/ metal table, including providing and fixing etc., |
| 21 | 8 module PVC box with modular plate, cover in front on surface or in recess or in wooden/metal table, including providing and fixing etc., |
| 22 | 1 No. of 5/6A rating modular switch including connections etc., as required. |
| 23 | 1 No. of 3 pin, 5/6A rating modular socket outlet including connections etc., as required. |
| 24 | Supply and drawing following UTP 4 pair twisted CAT - 6 lan cable in existing surface/recess/PVC conduits and including criming, termination, Numbering at both end as required.Make: Polycab/ Molex/ Finolex |
| 25 | Supply and fixing of 32 mm x 20 mm size PVC cable management with couplers, bends, end caps, t joints and other necessary fixing arrangements etc., as required. Make: Legrand/ MK |
| 26 | Supply and fixing of 50 mm x 50 mm size PVC cable management with couplers, bends, end caps, t joints and other necessary fixing arrangements etc., as required. Make: Legrand/ MK |
| 27 | Supplying, cutting, fixing and installation of 12 mm thick ply food whereever required for installation of electrical boxes etc.,ISI Marked |
| 28 | Supplying, fixing & termination of suitable size 2 module PVC box with Suitable for RJ45 LAN modular plate and cover in front on surface or in recess or in wooden table, including providing and fixing of 2 no. of RJ 45 LAN socket, connections etc., as required. Make: Legrand-Myrius/ Crabtree-Thames |
| 29 | SITC of the following rating, 415/ 230 Volts, \"C\" Curve, MCB (Miniture Circuit Breakers), Isolator & RCCB (Residual current circuit breakers) suitable for inductive load of the following poles in the existing DB/Metal clad box complete with connections & dummies etc., as required as per the directions of Engineer-In-Charge. Make: Legrand/ Siemens/ Schneider |
| 30 | 4 Pole, 125A, Isolator |
| 31 | 4 Pole, 100A, Isolator |
| 32 | 4 Pole, TPN, 63A, 100 mA, \"C\" Curve, RCCB |
| 33 | SITC of 6-way (8+18) surface/ recess mounting, vertical type, double door, VTPN DB with 415V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required.Make: Legrand/ Siemens/ Schneider |
| 34 | SITC of the following rating, 415/ 230 Volts, \"C\" Curve, MCB (Miniture Circuit Breakers), Isolator & RCCB (Residual current circuit breakers) suitable for inductive load of the following poles in the above mentioned VTPN MCB DB complete with connections & dummies etc., as required. Make: Legrand/ Siemens/ Schneider |
| 35 | 4 Pole, 100A, Isolator |
| 36 | 4 Pole, TPN, 63A, 100 mA, \"C\" Curve, RCCB |
| 37 | 3 Pole, TP, 63 A, \"C\" Curve, 10 kA breaking capacity, MCB |
| 38 | 3 Pole, TP, 32 A, \"C\" Curve, 10 kA breaking capacity, MCB |
| 39 | Single pole blanking plate |
| 40 | SITC of 20 Amps, 230 Volts, SPN industrial type socket outlet, with four pole and earth, metal enclosed plug top along with 20 Amps \"C\" curve, SPN MCB, in sheet steel enclosure, on surface or in recess with chained metal cover for the socket outlet, gland and connections, testing and commissioning etc., as required.Make: Legrand/ Siemens/ Schneider |
| 41 | SITC of 63 Amps, 415 Volts, TPN industrial type socket outlet, with four pole and earth, metal enclosed plug top along with 63 Amps \"C\" curve, TPN MCB, in sheet steel enclosure, on surface or in recess with chained metal cover for the socket outlet, gland and connections, testing and commissioning etc., as required.Make: Legrand/ Siemens/ Schneider |
| 42 | SITC of 40 mm (11/2\" PVC pipe) of Medium class PVC conduit along with accessories like couplers, bends, staples, saddles, screws, fastners, cement, concrete, sand etc., as required in surface/recess including cutting the wall and making good the same with cement, paint and sand in case of recessed conduit as required.Make: Precision/ Avonplast/ Modi |
| 43 | Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc., with charcoal/ coke and salt as required as per IS & CPWD specifications |
| 44 | Providing and fixing of 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc., as required. |
| 45 | Supplying and laying of 1 core * 10 sq. mm PVC insulated, copper cable ISI marked, on surface or in recess including digging sand and refilling same for loop earthing as required. Make: Finolex/ Polycab/ RR kabel/ Havells |
| 46 | Supply, Installation, Testing & Commissioning of 2 Ton cooling capacity, Non-Inverter type, fully copper coiled, minimum 3 star rated, Split Air Conditioner including green AC with temp range of 16 Deg. C to 30 Deg. C, Indoor & outdoor units fixing at respective locations and connections etc., and inclusive of standard copper pipe length of 3 mtrs, cordless remote control, drain pipe, white tape roll, outdoor stand, drilling the wall and refinishing the same as required to complete the job and shall have minimum warranty of 3 years.Make: Mitsubishi/ Hitachi/ Carrier/ Godrej/ Voltas/ Bluestar |
| 47 | SITC of 5 kVA Double booster stabilizer, fully copper suitable for 2 Ton split Air ConditionerMake: V-guard/ Premier/ Everest/ Microtek |
| 48 | Dismantling, Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc., as required. |
| 49 | SITC of Ceiling fan hook made up of (100 * 100 * 8 mm) size GI plate having 4 no\"s of 10 mm dia holes and forged and welded with 10 mm thick U-shaped rod in the mid portion and proper filing, sand blasting and rust free paint along with fastners as required as per the directions of Engineer-In-Charge. |
| 50 | Dismantling of existing 8 module plate and cover, switches and fan regulators from the existing box and providing 3mm thick hylam sheet and refixing the same in the new PVC box including electrical connections and accessories etc., as required as per the directions of Engineer In Charge. |
| 51 | Supply & fixing of 8 module PVC box in front on surface or in recess or in wooden/ metal table, including providing and fixing etc. as required.Make: Crabtree - Thames |
| 52 | Dismantling, shifting and refixing of existing 2*2 ft, 36 watt, LED fitting from the ceiling including electrical connections etc., as per the directions of Engineering In Charge. |
| 53 | PART - B: Civil works |
| 54 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 55 | For fixed portion |
| 56 | Powder coated aluminium (minimum thickness of powder coating 50 micron) Make: Jindal / Hindalco |
| 57 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 58 | Powder coated aluminium (minimum thickness of powder coating 50 micron) Make: Jindal / Hindalco |
| 59 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge. |
| 60 | Pre-laminated particle board with decorative lamination on both sidesMake: Centuary / Merino |
| 61 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap eading shall be paidin basic item): |
| 62 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) Make : Saint Gobin /Modiguard |
| 63 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 64 | 250x10 mm Make: Crown / Sigma |
| 65 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge |
| 66 | Anodized (AC 15 ) aluminium tubular handle bar Make: Crown / Sigma |
| 67 | Providing and fixing mortice Lock of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge.Make: Crown / Sigma |
| 68 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.Make: Crown / Sigma |
| 69 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness completeMake: Crown / Sigma |
| 70 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. completeMake: Crown / Sigma |
| 71 | 300x16 mm |
| 72 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:Make: Crown / Sigma |
| 73 | 125x75x4 mm |
| 74 | Labour charges for removing and Re-fixing of exisiting aluminium partition as required location size of 66mm x 38mm x2mm aluminium section, 6mm thickness plain glass on top (0.9m) and 12mm thickness pre laminated board (both side laminated) on bottom side (1.2m) in all partitions using necessary all the hardware items, and 2 No of 1.8m width sliding door with required hardware items etc complete all as per the direction of Engineer in Charge. (The rate including doors, hinges, lock, handle, all the channels and required hardware items etc. complete) |
