Tender For Repair/Renovation Of Rsq-14 At Rehari, Jammu. Cno-490 Np, jammu-Jammu And Kashmir

Tender For Repair/Renovation Of Rsq-14 At Rehari, Jammu. Cno-490 Np- Engaging Labour for clearance of site before and after execution of work. 2 6 mm leveling course in 1 : 4 ( 1 cement : 4 fine sand). 3 vi)For longitudinal and transverse joints overlap of 75mm and 100mm respectively is desired. The vital physical and chemical parameter of the membrane shall as under:-Softening point of membrane not less than 150*C & cold flexibility shall be upto 0*C when tested in accordance with ASTM ,Joint strength in longitudinal amd transverse direction at 23*C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. in 3mm thick , the weight of Roll (40 kg for 1meter by 10 meter ). 4 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. 5 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood. 6 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood. 35 mm. 7 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood. 35 mm. 8 Fabricating and fixing of almirahs, frames made of 18mm plyboard/19mm century or green plywood with front edge bending tape including HDHMR/19mm century or green plywood shelfs with both side laminaions and front edge bending tape, shutters made of 18mm one side prelaminated HDHMR board/19mm century or green plywood and designer laminate 0.8mm on exterior side with edge bending tape on four sides, backing made of 4mm ACP sheet (white matt) of standard make, complete sliding mechnasim/ flush hinges as per requirement, including stainless steel handles of standard make including lock, tower bolts, magnetic catcher incl hanging rods with brackets, telescopic channels for drawers and flush handles. SS(304 grade) baskets/drawers for almirah as required. 9 P/F Aluminum frame work with all necessary fixtures and making good the surface with 18 guage thick aluminum and powder coated surface of ivory shade including hinges, window /door shutters with panel inserts of 4 mm Glass/ACP sheet and epdm rubber strips at junctions including handles, locls, tower bolts etc. Complete jpb as per direction of Engg. I/C. 10 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work. Please Enable Macros to View BoQ information

INR 600 /-

INR 4 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB