|
| 1 | ITEM NO.1 Excavation in all Kinds of Soil including boulders upto 0.6m dia (0.113 cum) for canal, seating of embankment, filter catch drains etc and placing excavated stuff all material machinery, neatly in dump area or formation of embankment as directed including cost of labour, dressing bed and side to required level and profile etc with lead 1 km and 6m lift. |
| 2 | Nalla Deepning |
| 3 | ITEM NO.2 Excavation in Hard Murum including boulders upto 0.6m dia (0.113 cum) for canal, seating of embankment, filter catch drains etc and placing excavated stuff neatly in dump area or formation of embankment as directed including cost of all material machinery, labour,drassing bed and side to required level and profile etc with lead km and 6m lift. dressing |
| 4 | ITEM NO.3 Excavation in Soft Rock Without balsting including boulders upto 0.6m dia (0.113 cum) for canal, seating of embankment, filter catch drains etc and placing excavated stuff neatly in dump area or formation of embankment as directed including cost of all material machinery, labour,drassing bed and side to required level and profile etc with lead km and 6m lift. |
| 5 | ITEM NO.4 Excavation in Hard Rock of all toughness by blasting including boulders above 0.6 m dia. (0.113Cum) minimising damage to side slopes of excavation in water prism area by adopting any one or combination of line drilling/pre-splitting/smooth blasting techniques and placing the excavated rock neatly in approved dump area as directed including cost of all materials, machinery, labour, leveling bed etc. complete with lead up to 15 m and lift up to 6 m |
| 6 | ITEM NO.5 Providing and laying in situ cement concrete of grade M-15 of trap/granite/gneiss/quartzite/graded metal for foundation and bedding with Concrete Mixer including placing compacting, curing with an initial lead of 1 km and all lifts etc. complete as directed. |
| 7 | ITEM NO.5 Providing and laying in situ cement concrete of grade M-15 (40 MSA) of trap/granite/gneiss/quartzite/graded metal for PCC with or without surface reinforcement/RCC concreting requiring heavy of special type of shuttering for works of gallery, sluice, spillway crest, Spillway down stream face, energy dissipating structures, intake structures, training walls.piers abutment etc. with Batching plant and Transit mixer with shuttering and scaffolding compacting.Curing etc. complete with an Providing and laying in situ cement concrete of grade M-15 22.52 initial lead 50 and lift of 1.5m. |
| 8 | TEM NO.6 Providing & Fixing including Cutting, bending, hooking, laying in position and tying M.S. bars for reinforcement of R.C.C. work as per detailed drawing etc. complete |
| 9 | TEM No.7 Providing & fixing in position I.S.L.C.VERTICAL CHANNEL of size 150 mm X 75 mm as per design and drawing including fixing in position cutting etc welding hold fast of 20 mm bans one coat of oil painting of approvedanticorrossive paint and over two coats of oil painting of approved quality and shade etc compplete |
| 10 | ITEM No.8 Manufacturing with QAP & fabrication of KT weir needle gates straight type size 2.15 x 0.5M-94 Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623& Welding electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges, machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/-5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/-5 micron per coat as per IS 14177 |
| 11 | ITEM NO.9 Back filling up to ground level behind the canal structures etc. complete (without royalty) with suitable material of approved quality in layers not exceeding 20 cm without disturbing the structure etc. complete |
| 12 | ITEM No.10 Providing and constructing 230mm thick dry rubble Revetment with pin headers at 2.00 per sqm. Using stone and stone chips from approved source including cost of material, abour,hand packing edging stone chips, finishing etc complete with all lead and lift excluding royalty of material |
| 13 | ITEM No.11 Providing and fixing canal information board of 1.2 x 0.75m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enamelled bonded with red retro reflective sheet Engineering grade, border /letters/numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50X50X5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. And 20 mm long sheet and angle iron post in one piece without joints inclu |
| 14 | Insurance |
| 15 | Royalty |
| 16 | GST Tender Amount Rs.1920299/- Please Enable Macros to View BoQ information |
