|
| 1 | Eeathwork in excauvation i/c all comnp.AS S.LNO-251 |
| 2 | Earthwork in filling cartage upto 3km. i/c all comp. |
| 3 | Plain cement concrement 1:6:12 nominal mix infoundation with crushed aggregate 40 mm nominalsize mechanically mixed,placed in foundation and|compected by vibration including curing for 14 days ASS.LNO. (273) |
| 4 | First class brickwork in 1:4 cement and fine sand i/c alcomp.AS SI NO-305(a) |
| 5 | M-150 Class BW in 1:3 cement with corse sand i/c allcomp.AS S.l.no-307. In superstructer. SHo 307 |
| 6 | Furnishing and placing reintforced cement concrementin super structure as per drawing and Technical|Specifications.M20 (1:2:4).S.ILNO.(283) |
| 7 | Supplying fitting and placing HYSD bar reinforcement|in superstructure complete as per drawing andTechnical Specifications clauses.S.I.NO.(504) |
| 8 | Plastering with cement mortar (1:4) 12 mm thick onbrickwork in substructure/superstracutre .S.I.NO.584. |
| 9 | M.S. or iron work in heavy sizes i/c all comp.SNoS |
| 10 | Finishing walls with white based putty ilc all|comp.DR.13.8 CHAPTER15 |
| 11 | Finishing walls with w.p.c.paint i/c all comp.AS S.I.NO-660+661. |
| 12 | Electricfication work(wiring, light etc.) i/c all comp.(M.R) |
| 13 | Supply and instalation of submer sible with water fittingsupply i/c all comp.(M.R.) |
| 14 | Providing and fixing precoated galvanised iron profile sheets (size, shape|and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+|0.05 %) total coated thickness with zinc coating 120grams per sqm as perIS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side ofthe sheet and polyester top coat 15-18microns. Sheet should haveprotective guard of 25 micronsminimum to avoid scratches duringtransportation and should besupplied in single length upto 12 metre or asdesired by Engincerin-charge. The sheet shall be fixed using self drilling|/self tappingscrews of size (5.5x 55 mn) with EPDM seal, complete uptoanyciich in horizontall vertical or curved surfaces, excluding the costofpurlins, rafters and trusses and including cutting to size andshapewherever required.AS DSR-12.50 |
| 15 | STeel work in built up tubular (round, square orrectangular hollow tubesetc.) trusses etc., includingcutting, hoisting, fixing in position andapplying apriming coat of approved steel primer, includingwelding andbolted with special shaped washers etc.complete. As DSR.NO-10.161 |
| 16 | Construction of granular sub-base by providing wellgraded material, spreading in uniform layers withmotor grader on prepared surface, mixing by mix inplace method with rotavator at OMC, and compactingwith smooth wheel roller to achieve the desired|density, complete as per Technical SpecificationClause 401. |
| 17 | Construcation of un-reinforceed, dowel jointed at expanssion and construction|joint only, plain cement concrete payment, thickness as desing over a preparedsub başe, with 43 grade cement or any other type as per clause 1501.2.2 M30(Grade) coarse and fine aggregates conforming to IS: 383, Maximum size ofcoarse aggregate not exceeding 25 mm Mixed in a concrete mixer of not less|than 0.2 cum capacity and appropriate weigh batcher using approved mix design| laidin approved fixed side lorwork (steel plates including leveling the formwork asper drawing) spreading the concrete with shovels rakes compacted using needlescreed and plate vibrators and finished in continuous operation including provision|of contraction and expansion, constrution joint, applying deboning strips, primer,sealamt dwell bars, near approaches tobridge/culvert and construction joint,admixtures as approved, curing of concrete stabs for 14-days, using curingcompound (Where specified) and water finishing to lines and grade as perdrawingand tecnical aspcification clause 1501 |
| 18 | Mild steel or iron work in heavy sizes i/c all comp. |
| 19 | Supply and fixing of R.C.C. section bench i/c all comp. |
| 20 | 2.5cm thick flooring /c all comp. SN 600 |
| 21 | Supply and fixing of Solar light i/c all comp. |
| 22 | Supply and fixing of Shilapath and signboard lc allComp. |
| 23 | GST 18% (Notice- SEE manual estimate Please Enable Macros to View BoQ information |
