|
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, brush, shrubs, saplings and trees of girth upto 300mm, removal of stumps, disposal of unserviceable Material and stacking of serviceable Material upto 1000m from road boundary. (MoRTH Specification : Clause 201). BY MECHANICAL MEANS In area of Light Jungle |
| 2 | A/R to Bhooden |
| 3 | A/R to Pipalda Samel Km 0/0 to 7/500 |
| 4 | Total |
| 5 | Filling pot holes and patch repair with Wet Mix Macadam specifications including premixing the Material with water to OMC in mechanical mixer (Pug mill) as per design mix, carriage of mixed Material by tipper to site laying in uniform layers, with motor grader/F.E. loader/Paver Finisher, in sub-base/base course on a well prepared under-base and compacting with Vibratory Roller to achieve the desired density including lighting, guarding, barricading and maintenance of Driversion etc. (MoRTH specification : Clause 406). with all lead & lift |
| 6 | A/R to Bhooden |
| 7 | A/R to Pipalda Samel Km 0/0 to 7/500 |
| 8 | Total |
| 9 | Filling pot-holes and patch repairs with open-graded premix surfacing, 20mm thick compacted with bitumen binder VG10 @14.60 kg/10 sqm and aggregate in Hot Mix Plant, transporting the mixed Material with tipper and laying manually to the required level and grade, rolling with power roller, 8-10 tonne, removal of all failed Material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot-holes with hot bituminous Material as per Clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 including cost of tack coat and including cost of seal coat type B with lead for mix of Material 1 km. (MoRTH specification : Clause 3004.2) |
| 10 | A/R to Bhooden |
| 11 | A/R to Pipalda Samel Km 0/0 to 7/500 |
| 12 | Total |
| 13 | Construction of sub-grade and earthen shoulders with approved Material obtained from borrow-pits with all lifts and leads, transporting to site, spreading, grading to require slope and compacted by vibratory roller 8-10 tonne to meet requirement of Table 300-2 as per MoRTH specification : Clause No. 305. |
| 14 | A/R to Bhooden |
| 15 | A/R to Pipalda Samel Km 0/0 to 7/500 |
| 16 | Total |
| 17 | Providing, laying and spreading of granular sub-base by providing coarse graded Material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MoRTH Specification : clause No. 401. Grading-III |
| 18 | A/R to Bhooden |
| 19 | A/R to Pipalda Samel Km 0/0 to 7/500 |
| 20 | Total |
| 21 | Providing and Erecting typical Citizens Information Board as per approved drawing & specification of MoRD, made of two MS Sheet of 1.6 mm thick each of size 900 mm × 750 mm stiffened by angle iron 25 mm ×25 mm × 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 SWG sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick MS plate at 12 places (65 × 50 mm) duly embedded in cement concrete M-15 grade of block of 600 mm × 600 mm × 750 mm size below ground level as per enclosed drawings & as directed by Engineering - In-Charge. All MS will be stove enameled on both side, Lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per MoRD specification. |
| 22 | A/R to Bhooden |
| 23 | A/R to Pipalda Samel Km 0/0 to 7/500 |
| 24 | Total Please Enable Macros to View BoQ information |
