|
| 1 | Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m deep along the existing sewage line and getting out in hard/ dense soil complete all as specified and as directed. |
| 2 | Returning and filling soil in layers not exceeding 25cm thick each layer including spreading leveling watering and well ramming complete all as speicified and as directed. |
| 3 | Removal of surplus material to a distance not exc 50m and deposited where directred at a level not exc 1.50 m above starting point complete all as specified and as directed. |
| 4 | M & L salt glazed stone ware drain pipes of internal dia 150 mm bore grade \"A\" laid in trenches and jointed set in cement mortar all as specified and as directed. |
| 5 | M & L salt glazed stone ware drain pipes of internal dia 200 mm bore grade \"A\" laid in trenches and jointed set in cement mortar all as specified and as directed. |
| 6 | Supply and fixing reinforced concrete pipe NP-2laid and jointed complete with collars for 150 mm bore pipe complete all as specified and as directed. |
| 7 | Supply and fixing reinforced concrete pipe NP-2laid and jointed complete with collars for 200 mm bore pipe complete all as specified and as directed. |
| 8 | M&L for concrete bed to drain pipe including packing under and haunching against the side of drain pipe after thaey are laid and tested in PCC 1:3:6 type C-2 for 200mm dia and complete all as specified and as directed. |
| 9 | M&L for concrete bed to drain pipe including packing under and haunching against the side of drain pipe after they are laid and tested in PCC 1:3:6 type C-2 for 150mm dia and complete all as specified and directed. |
| 10 | Material and labour for PCC 1:2:4 type B1 (using 20mm thick graded stone aggregate) as in bed plates, including weathering, slightly rounded or chamfered angles and throating, coping etc including necessary form work completeall as specified and directed. |
| 11 | M & L PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and as directed. |
| 12 | Cutting into existing manholes for connecting new drains, of size 150/200 mm internal dia of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed. |
| 13 | S&F of 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including strap, nut, bolt, screw, rawl plug etc complete all as specified and directed. |
| 14 | S&F of 75mm dia bore PVC (SWR) bends any radius incl cutting and making good of wall complete all as specified and directed. |
| 15 | S&F of 75mm bore PVC (SWR) junction single, (Single Y) equal or unequal any radiusincl cutting and making good of wall complete all as specified and directed. |
| 16 | M&L pre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 incl demoliion of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed. |
| 17 | M&L 15mm thick rendering on externalfair faces of brick work or concrete surfaces in CM 1:4mixed with water proofing compound and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.Note : WPC shall be measured & paid seperately. |
| 18 | Supply only integral water proofing compound of approved make complete all as specified and as directed. |
| 19 | M&L for providing precast cement concrete 1:2:4 type B1 (using 20mm stone aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and setting in cement mortar 1:4 complete all as specified and directed. |
| 20 | M&L for TMT bars 8 mm dia and above, cut to length bent to shape required including cranking, hooking ends etc and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed. |
| 21 | M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed. |
| 22 | S&F Rotational moulded polyethylene water storage tank of500 Ltrs capacity cylindericalvertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and 15mm bore for outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I complete all as specified and directed. |
| 23 | M&L for galvanised steel tubing 15mm bore of medium grade with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 24 | S&F of gun-metal, 15mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 25 | M&L for galvanised steel tubing 20mm bore of medium grade with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 26 | M&L for galvanised steel tubing 25mm bore of medium grade with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 27 | S&F of gun-metal, 25mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 28 | S&F bib tap suitable for washing machine brass body chromium plated fixed to 15mm dia bore of pipe complete all as specified and as directed. |
| 29 | M&L Hard core of gauge n.exe.63mm with broken stone boulders, deposited spread and levelled in layers not exe 15 cm thick watered and rolled rammed to a true surfaces complete all as specified and as directed. |
| 30 | M&L pre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 complete all as specified and as directed. |
| 31 | M&L RCC type B1 1:2:4, 20 mm graded stone aggregate (nominal mix) as in plinth beam/band etc mixed with using integral water proofing compound. (WPC shall be measured and paid separately) complete all as specified and as directed. |
| 32 | M&L for TMT bars 8mm dia in stirups cut to length bent to shape required including cranking, hooking ends etc and binding with MS wire not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 33 | Formwork to sides of concrete foundation,footing,based of columns,raft and raft beam,sides and soffits (if any) of foundation and plinth beams,and similar works,vertical or to batter rough finished flat surface of concrete complete all as specified and as directed. |
| 34 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed. |
| 35 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 36 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 37 | M&L for preparation of new steel surface and appling two coat of synthetic enamel paint on new steel surface over a coat of red oxide primer complete all as specified and directed. |
| 38 | M&L for preparation of new wooden surface and appling two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 39 | Filling under floor in layers not exc 25 cm incl spreading, levelling watering etc complete using soils from excavation complete all as specified and as directed. |
| 40 | M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement complete all as specified and directed. |
| 41 | M&L preparation of new plastered surfaces and applying water proof cement base putty 1.5mm thick and applying two coats of oil bound distemper over one coat of interior wall care primer complete all as specified and as directed. |
| 42 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 43 | M&L for joint free non skid coloured ceramic tiles 7 to 8 mm thick area of each tile not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match incl 15 mm thick screed bed in cement mortar 1:4 for layingfloor finishes complete all as specified and directed. |
| 44 | M&L forglazed ceramic coloured tiles of size 350mmx250mm/ 300mm X 450mmx7 to 8 mm thick, on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured / white cement to match the tiles inc rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc complete all as specified and directed. |
| 45 | M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate 100mm thick as in sub base of floor finished even and rough to receive top layer and all as specified and directed. |
| 46 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. The rate includes Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories area n.exc 2.00 Sqm eachcompleteincluding 5mm thick sheet glass panes. |
| 47 | M&L for 4.5mm thick powder coated aluminium grill with 50mm opening(anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge |
| 48 | Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framedrebated on the solid,rounded or chamfered, puttogether with glue pinned at joints, complete all as specified and as directed. |
| 49 | S & F factory made, Flush shutters 30 mm thick , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 50 | S &F2nd class hardwood 30mm thick factory made glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, withplain, chamfered or rounded mitred and rebated with out sash bars, edges of framing plain , chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) complete all as specified and as directed. |
| 51 | S & F 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 52 | Supply & Fixing150 mm aluminium handles, cast type, anodisedcomplete all as specified and as directed. |
| 53 | S&FButt hinges, medium weight cold rolled stainless steel and fixed 75mm size complete all as specified and as directed. |
| 54 | S & F 250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 55 | M&L for annodised aluminium snap grid frame work for false ceiling incl hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 3 mm dia 40mm long and 6.5 mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mmx600mm grid(frame work for ceiling shall be measured and paid seperately) complete all as specified and as directed. |
| 56 | S&F of 8 feet 4 pipes pulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of lemgth 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg, minimum weight of rope shall not be less than 7700Gms/unit (for 04 pipes) complete all as specified and directed. Make : Easydry or equivalent |
| 57 | Material and labourfor Machine cut Sadrahalli stone slab of 18 - 20mm thick (1st Quality) as in floor, riser of steps, laid over cement screed 15mm thick in CM (1:6) and jointedgrey cement slurry mixed with pigment to match the shade of the slab and including rubbing, polishing complete all as spfd and directed. |
| 58 | Material and labourfor Machine cut Sadrahalli stone slab of 18 - 20 mm thick(1 st Quality) as in skirting, dado and pillar laid over cement screed 10mm thick in CM (1:4) and jointedgrey cement slurry mixed with pigment to match the shade of the slab and including rubbing, polishing complete all as spfd and directed. |
| 59 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard dense soil complete all as specified and as directed. |
| 60 | S&F sink with drainage board made of stainless steel 1mm thick with plugs, washer and wastes including fixing in cement mortor 1:3 to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915x460mm,bowl size 410 mmx 330 mmx 160 mm including CP waste coupling complete all as specified and as directed. |
| 61 | Supply and fixing 54 cm undercounter lavatory wash basin, vitreous China including cutting for and pinning in ends of brackets or erecting stand incl supply and fixing of waste couplings, waste pipe complete all as specified and as directed. |
| 62 | Supply and fix 15 mm borefancy type pillar taps chromium plated cast copper alloy with capstan head, long screwed shanks complete all as specified and as directed. |
| 63 | S & F 75 mm bore PVC (SWR) floor trapwith grating incl jointing with solvent cement complete all as specified and as directed. |
| 64 | M&L for Granite slab 18 to 20mm thick (table rubbed and polished) in partition, set cement mortar (1:4) complete all as specified and as directed. |
| 65 | S & F Rotational moulded Polyethylene water storage tank - 1000 liters capacity (cylidrical vertical with threaded top cover) hoisted and fixed in position all as specified in SSR part I complete all as specified and as directed. |
| 66 | S & F 20 mm dia CPVC gate valve screwed both ends for CPVC pipe complete all as specified and as directed. |
| 67 | M&L for 20mm bore cpvc tubes concealed in walls complete all as specified and as directed. |
| 68 | M&L for Bib taps cast copper alloy fancy type chromium plated 15mm bore fixed complete all as specified and as directed. |
| 69 | S&F angular stop valves cast copper screwed down high pressure fancy type screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed. |
| 70 | S & F PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and as directed. |
| 71 | Supply and fix 110mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed. |
| 72 | Supply and fix 110mm dia PVC bend any radius complete all as specified and as directed. |
| 73 | Supply and fix 75mm dia PVC bend any radius complete all as specified and as directed. |
| 74 | S & F PVC (SWR) bends of any radius with access door bore of pipe 75 mm complete all as specified and as directed. |
| 75 | S & F PVC (SWR) bends of any radius with access door bore of pipe 110 mm complete all as specified and as directed. |
| 76 | S & F PVC (SWR)junction single(single T)equal or unequal with access door bore of pipe 110 mm complete all as specified and as directed. |
| 77 | S& F in repair 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified anddirected. |
| 78 | M&L for concrete bed for 150 mm dia pipe including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete 1:4:8 type D2using 40mm graded crushed stone aggregate complete all as specified and directed. |
| 79 | M & L salt glazed stone ware drain pipes of internal dia 150 mm bore grade \"A\" laid in trenches and jointed in cement mortar incl demolition and breaking up old drain pipe (salt glazed stoneware drain pipe) set in cement concrete, complete all as specified and as directed. |
| 80 | M & L for Point wiring with PVC insulated FRLS 4.0 sq mm multi stranded copper conductor cable 1100 Volts grade drawn into and including concealedrigid non metalic PVC conduit/casing caping medium grade not less than 19/20 mm ( ISI marked ) with all fitting and fixing accessories including sunk in pressed steel chromium plated terminal boxes, concealed in wall/surface/roofs/floor/ceiling etc as per site requirement and making & matching the existing surface ) white bakelite sheet cover for mounting switches, Sockets, Fan regulators etc or modular cover plate with frame including sunken boxes suitableto fix modular cover plate with frame , concealed in wall and 4.0 sq mm multi stranded copper conductor cable as continuous earth wire drawn with wiring and connected to common earth dolly for one power point controlled by one 16 Amp switch complete all as specified and directed. Make of wire: Polycab/Plaza/HavellsNote:Blanking plate,Modular cover plate ,Switches, sockets outlets shall be measured and paid for separetely. |
| 81 | Supply and Fixmodular switch1 way 16 Amp.1 module, complete all as specified and directed. Make :Legrand/ Crabtree/ Anchor /Indoasian |
| 82 | Supply and Fix modular Socket, 16A - 3/5 pin combined 2 module, complete all as specified and directed. Make : Legrand/ Crabtree/ Anchor/Indoasian |
| 83 | Supply and fix White cover plate with frame,4 module |
| 84 | M&L for Sub main wiring with PVC insulated unsheathedFRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 4 Sqmm drawn through in and incl suitable size PVC casing capping and all accessories fixed to wall/floors along with 4 Sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly complete all as specified and as directed.Note: (a)2 runs of 4 Sqmm cable along with onerun of 4 Sqmm cable for earth conductor shall be measured as one length.Make:- Havells/ Polycab/ Plaza. |
| 85 | S&F factory madepowder coated distribution board SPN 4 way double door,includingbus bar, Neutral bar, standard DIN rail, earth barconforming to IS: 8623, all as specified and directed. Make : Legrand/ L&T/ Indo Asian |
| 86 | S & F MCB SPN 240 volts 16 to 40 Amps breaking capacity 10 KA \"C\" series complete all as specified and as directed .Make : Legrand/ L&T/ Indo Asian |
| 87 | M & L for Point wiring with PVC insulated FRLS 1.5 sq mm multi stranded copper conductor cable 1100 Volts grade drawn into and including rigid non mettalic PVC conduit/casing caping medium grade not less than 19/20 mm ( ISI marked ) with all fitting and fixing accessories including sunk in pressed steel chromium plated terminal boxes, concealed in wall/surface/roofs/floor/ceiling etc as per site requirement and making & matching the existing surface ) white bakelite sheet cover for mounting switches, Sockets, Fan regulators etc or modular cover plate with frame including sunken boxes suitableto fix modular cover plate with frame , concealed in wall and 1.5 sq mm multi stranded copper conductor cable as continuous earth wire drawn with wiring and connected to common earth dolly for one light point controlled by one wayswitch complete all as specified and directed :- Make of wire: Polycab/Plaza/HavellsNote:Blanking plate,Modular cover plate ,Switches, sockets outlets, Light fittngs, fans, bells & regulators shall be measured and paid for separetely). |
| 88 | All as per item No 87 but for Onefan point controlled by one switch one way 5 Amps and fan speed regulator |
| 89 | All as per item No 87 but for One Exhaust/wall fan point controlled by one switch one way 5 Amps |
| 90 | All as per item No. 87 here -in - before but for One 2/3 pin switch socket point controlled by 5 Amps switch on Independent board. |
| 91 | All as per item No 87 but forOne socket out let 5 Amps 3 pin on same board. |
| 92 | Supply and Fixmodular switch1 way 6 Amp.1 module, complete all as specified and directed.Make : Legrand/ Crabtree/ Anchor/Indoasian |
| 93 | Supply and Fixmodular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.Make : Legrand/ Crabtree/ Anchor/Indoasian |
| 94 | S & F modular White cover plate with frame, 1 module |
| 95 | S & F modular White cover plate with frame, 2 module |
| 96 | S & F modular White cover plate with frame, 3 module |
| 97 | S & F modular White cover plate with frame, 6 module |
| 98 | Supply and fix ceiling rose, surface bakelite type,PVC, 65 x 50 mm isolated body with three terminals all as specified and as directed. Make : Legrand/ Crabtree/ Anchor/Indoasian |
| 99 | Supply and fix new industrial type wall fan 18\" sweep with 3 speed and aluminium alloy blades, double ball bearing oscilation arrangement complete all as specified and directed. Make-Havells /Bajaj/ Crompton Greaves |
| 100 | Supply and Fixing 4 feet surface mounted batten type luminaire , lumen output of 2000 lumens, high efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle not less than 120° to ensure better uniformity with an operating voltage range from 140V-270V. The luminaire shall have a white extrusion housing with a poly carbonate diffuser to provide uniform light and sleek design with width not more than 22 mm. The luminaire shall have a CRI >80, Color temperature 6500K, THD <10% and PF >0.95,SDCM<5, IP20, IK02, Operating Temperature: -10 TO + 45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-55 HZ. The luminaire shall have flicker content<5% and shall have high and low cut off with auto restart feature.Driver Safety requirement stds: IS 15885-2-13. The luminaire shall be EMI/ EMC compliant and shall have a internal surge protection of 4 KV. The luminaire shall have Class-1 Electrical insulation, Class-B serviceability .The luminaire and driver shall be BIS approved, complete all as specified and directed.Make : Philips/ Bajaj / CG/Havells. |
| 101 | Supply and fixing building security/ LED street light fitting 35/36 Watt, 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal, management in multiple optics complete, with IP 65/66 protection complete all as specified and directed. Make: Philips/Bajaj/CG |
| 102 | Supply and fixingExhaust fan 300 mm sweep 230/ 240 volt AC single phase Metal body 1400 RPM including necessary nut, bolts / screws complete all as specified and directed. Make-Havells /Bajaj/ Crompton Greaves |
| 103 | Supply and Fixing 2 feet surface mounted batten type luminaire , lumen output of 1000 lumens, high efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle not less than 120° to ensure better uniformity with an operating voltage range from 140V-270V. The luminaire shall have a white extrusion housing with a poly carbonate diffuser to provide uniform light and sleek design with width not more than 22 mm. The luminaire shall have a CRI >80, Color temperature 6500K, THD <10% and PF >0.95,SDCM<5, IP20, IK02, Operating Temperature: -10 TO + 45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-55 HZ. The luminaire shall have flicker content<5% and shall have high and low cut off with auto restart feature.Driver Safety requirement stds: IS 15885-2-13. The luminaire shall be EMI/ EMC compliant and shall have a internal surge protection of 4 KV. The luminaire shall have Class-1 Electrical insulation, Class-B serviceability .The luminaire and driver shall be BIS approved, complete all as specified and directed.Make : Philips/ Bajaj / CG/Havells. |
| 104 | S&F factory madepowder coated distribution board SPN 8 way double door,includingbus bar, Neutral bar, standard DIN rail, earth bar complete including taking down unserviceable DBall as specified and conforming to IS: 8623, all as specified and directed. Make : Legrand/ L&T/ Indo Asian |
| 105 | S & F MCB single pole 240 volts 6 to 40 Amps breaking capacity 10 KA \"C\" seriescomplete all as specified and as directed. Make : Legrand/ L&T/ Indo Asian |
