Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-12-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-12-2025 |
| 2 | 12-12-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-12-2025 |
| Sl. No. | Item Description |
| 1 | Almirah steel Med and Small FD-243,110 & 1032 . Removing the existing unserviceable part with the following new part :- |
| 2 | M&L self made out of 1.0mm thick Mild Steel Sheet of almirah steel med and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats ofSynthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf complete all as specified . |
| 3 | M&L door made out of 1.0mm thick Mild Steel Sheet of alimrah steel med and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats ofSynthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Door complete all as specified . |
| 4 | M&L leg made out of 1.0mm thick Mild Steel Sheet of almirah steel med and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg complete all as specified . |
| 5 | M&L locking device complete with MS rod and cover of almirah steel med and made to shape and size as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Locking Device complete all as specified . |
| 6 | M&L Brass lock of almirah steel med and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Lock complete all as specified . |
| 7 | M&L chromium plated Mild Steel handle of almirah steel med and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Handle complete all as specified . |
| 8 | M&L Mild Steel hinge 75mm in size suitable for almirah steel med and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Hinge complete all as specified . |
| 9 | M&L preperation of old surfaces of almirah med steel (Drawing No. FD-243 & FD-1032) by Sand Paper/Scrapper and applying two Coat of , Synthetic Enamell Paint by Spray Painting Machine, complete all as specified and as directed. Outer side of front doors of Almirah Shall be painted in blue/brown colour and remaining portion shall be painted in Light Grey/Off White colour complete all as specified . |
| 10 | Almirah Large steel, 1/2H 1/2S FD-351,1031 & 1033. Removing the existing unserviceable part with the following new part :- |
| 11 | M&L shelf made out of 1.0mm thick Mild Steel Sheet of almirah large steel and made to shape and size as shown on Drawing No. FD-1031, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf complete all as specified . |
| 12 | M&L door made out of 1.0mm thick Mild Steel Sheet of almirah large steel and made to shape and size as shown on Drawing No. FD-1031, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Door complete all as specified . |
| 13 | M&L leg made out of 1.0mm thick Mild Steel Sheet of almirah large steel and made to shape and size as shown on Drawing No. FD-1031, necessary preperation of surfaces, applying two coats ofSynthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg complete all as specified . |
| 14 | M&L locking device complete with MS rod and cover of almirah large steel and made to shape and size as shown on Drawing No. FD-1031 including taking out unserviceable Locking Device complete all as specified . |
| 15 | M&L Brass LOCKof ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-1031 & FD-1033 including taking out unserviceable Lock complete all as specified . |
| 16 | M&L Chromium plated Mild Steel HANDLE of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-1031 including taking out unserviceable Handle complete all as specified . |
| 17 | M&L Mild Steel HINGE 75mm in size suitable for ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-1031 including taking out unserviceable Hinge complete all as specified . |
| 18 | M&L preperation of old surfaces of ALMIRAH LARGE STEEL (Drawing No. FD-1031 &1033) by Sand Paper/Scrapper and applying two Coat ofSynthetic Enamell Paintby Spray Painting Machine, complete all as specified and as directed. Outer side of front doors of Almirah Shall be painted in blue/brown colour and remaining portion shall be painted in Light Grey/Off White colour complete all as specified . |
| 19 | Chair VerandahFD-256, 359 & FD/E6/MAP/11.Removing the existing unserviceable part with the following new part :- |
| 20 | M&Lwelding (full round of pipe as a one spot) ofbroken part of chair verandah as shown on Drawing No. FD-256 & FD-359, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of (White Colour) Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable part complete all as specified . |
| 21 | M&L Mild Steel Round Bar 12mm dia to cover the distance between RT & LT Leg alongwith the Seat Front Side and Rear Side of chair verandah as shown on Drawing No. FD-256 & FD-359 and welded, necessary preperation of surfaces, applying two coats of (White Colour) Synthetic enamel paintby spray painting machine over a coat of red oxide primer including taking out unserviceable Bar complete all as specified . |
| 22 | S&F hard rubber shoe superior qualityfixing to Leg of chair verandah as shown on Drawing No. FD-259 & 356 including taking out unserviceable Shoe complete all as specified . |
| 23 | M&L Re-canning of chair verandah in mat pattern with 4.0mm wide Half Round Oval Shape Plastic Cane (as approved) to Frame as shown on Drawing No. D-256 & 359 including taking out old/worn out Canning complete all as specified . |
| 24 | M&L removing/scrapping old worn out Paint from Steel Frame of chair verandah (Drawing No. FD-256 & 359) by Sand Paper/Scrapper and applying One Coat of White Colour Synthetic Enamell Paint by Spray Painting Machine complete all as specified . |
| 25 | Chair CB A SteelWith Arms FD-75(M) Removing the existing unserviceable part with the following new part :- |
| 26 | M&L seat frame made out of Second Class Hardwood of chair CBA steel with arms, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Synthetic Enamell Paint on Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Seat Frame complete all as specified . |
| 27 | M&L back frame made out of Second Class Hardwood of chair CBA steel with arms, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Synthetic Enamell Painton Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Back Frame complete all as specified . |
| 28 | M&L ARMS REST made out of Second Class Hardwood of CHAIR CBA STEEL WITH ARMS, fixed with suitable size Screws and Painting with Synthetic Enamell Painton Back Frame as shown on Drawing No. FD-75(M) including taking out unserviceable Arms Rest complete all as specified . |
| 29 | M&L Mild Steel Flat Iron 25x3.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL WITH ARMSsize35x25x3 mm, applying two coat of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD-75(M) including taking out unserviceable Runner complete all as specified . |
| 30 | S&F PVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap complete all as specified . |
| 31 | S&F HARD RUBBER SHOE superior qualityfixing to Leg of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe complete all as specified . |
| 32 | M&L removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)) by Sand Paper/ Scrapper and applying one coat of Synthetic Enamell Paint (as approved) by Spray Painting Machine complete all as specified . |
| 33 | Chair CB Steel W/O Arms FD-75(M) Removing the existing unserviceable part with the following part :- |
| 34 | M&L seat frame made out of Second Class Hardwood of chair CB steel w/o arms, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Synthetic Enamell Painton Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Seat Frame, complete all as specified and as directed. |
| 35 | M&L back frame made out of Second Class Hardwood of chair CBA steel w/o arms, fixed with 4 No. of Machine Screw 75x3.0mm and Painting with Synthetic Enamell Painton Seat Frame, canning with superior quality of Plastic Cane 2.0mm Half Round Oval Shape for Seat and 3.0mm for Border as shown on Drawing No. FD-75(M) including taking out unserviceable Back Frame complete all as specified . |
| 36 | M&L Mild Steel Flat Iron 25x3.0mm as runner of length 350mm (approx), making hole for fixing End and Other End welded to chair CBA steel w/o arms size35x25x3 mm, applying two coats of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD-75(M) including taking out unserviceable Runner complete all as specified . |
| 37 | S&F PVC CAP at the top of Back Steel Pipe of chair CBA steel w/o arms as shown on Drawing No. FD-75(M) including taking out unserviceable Cap complete all as specified . |
| 38 | S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe complete all as specified . |
| 39 | M&L removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)) by Sand Paper/Scrapper and applying One Coat of Synthetic Enamell Paint (as approved) by Spray Painting Machine complete all as specified . |
| 40 | Chair Computer,Chair visitors and Chair Revolving Various types Trade Pattern Removing the existing unserviceable part with the following new part :- |
| 41 | M&L TAPESTRY/FABRIC CLOTH over SYNTHETIC FOAM 25mm thickfor SEAT/BACK of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs complete all as specified . |
| 42 | M&L CASTOR WHEEL suitable and match with existing castor wheels of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable or broken Castor Wheel from Chairs complete all as specified . |
| 43 | M&L BOTTOM BASE (as approved) of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Bottom Base from Chairs complete all as specified . |
| 44 | M&L GAS LIFTING HYDROULIC SYSTEM of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Gas Lifting Hydroulic System from Chairs complete all as specified . |
| 45 | M&L handle of chair computer/chair visitor/ chair revolving including taking out unserviceable Handle from Chairs complete all as specified . |
| 46 | Table Office Officer steel FD-1003 Removing the existing unserviceable part with the following new part :- |
| 47 | M&L top of table office officer steelof Prelaminated post forming MDF Board 18/19 mm thick duly round edges, exterior grade providing Teak Wood Beading 5.0 mm thick all round,applying french polish upto the desired finish on beading, as shown on Drawing No. FD-1003 including taking out unserviceable Top complete all as specified . |
| 48 | M&L DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-1003, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Drawer complete all as specified . |
| 49 | M&L central stiffener made out of Mild Steel Square Pipe of 25mm and fixing to table office officer steel as shown on Drawing No.FD-1003, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable Central Stiffener complete all as specified . |
| 50 | M&L side stiffener made out of Mild Steel Square Pipe of 25mm and fixing to table office officer steel as shown on Drawing No.FD-1003, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener complete all as specified . |
| 51 | M&L Brass lock of table office officer steel and fixing as shown on Drawing No. FD-1003 including taking out unserviceable Lock complete all as specified . |
| 52 | M&L Mild Steel handle of table office officer steel and fixing as shown on Drawing No. FD-1003 including taking out unserviceable Handle complete all as specified . |
| 53 | M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for table office officer steel as shown on Drawing No. FD-84 & FD-1003, necessary preperation of surfaces, applying two coats of , Synthetic enamel paintby spray painting machine over a coat of red oxide primer complete all as specified . |
| 54 | M&L removing/scrapping old worn out Paint from table office officer steel(Drawing No. FD-1003) by Sand Paper/Scrapper and applying Two Coats of , Synthetic Enamell Paint by Spray Painting Machine complete all as specified . |
| 55 | Table office clk steel FD-1004.Removing the existing unserviceable part with the following new part :- |
| 56 | M&L top of table office clerk steel of Prelaminated post forming MDF Board 18/19 mm thick duly rounded edges,exterior grade providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on Drawing No. FD-1004 including taking out unserviceable Top complete all as specified . |
| 57 | M&L drawer made out of 1.6mm thick Mild Steel Sheet and fixing to table office clerk steel as shown on Drawing No.FD-1004, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primerincluding taking out unserviceable Drawer complete all as specified . |
| 58 | M&L central stiffener made out of Mild Steel Square Pipe of 25mm and fixing to table clerk steel STEEL as shown on Drawing No. FD-1004, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable Central Stiffener complete all as specified . |
| 59 | M&L side stiffener made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-1004, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener complete all as specified . |
| 60 | M&L Brass LOCK (MAKE : GODREJ) of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing No. FD-1004 including taking out unserviceable Lock complete all as specified . |
| 61 | M&L Mild Steel HANDLE of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing No.FD-1004 including taking out unserviceable Handle complete all as specified . |
| 62 | M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-1004, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified . |
| 63 | M&L removing/scrapping old worn out Paint from TABLE OFFICE CLERK STEEL (Drawing No. FD-1004) by Sand Paper/ Scrapper and applying Two Coats of , Synthetic Enamell Paint by Spray Painting Machine complete all as specified . |
| 64 | Table 3\"x2\" with out Drawer FD-1007 Removing the existing unserviceable part with the following new part :- |
| 65 | M&L TOP of TABLE 3\"X2\"WITH OUT DRAWER of Prelaminated post forming MDF Board 18/19 mm thick duly rounded edges, exterior grade providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-1007including taking out unserviceable Top complete all as specified . |
| 66 | M&L CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3\"X2\"WITH OUT DRAWERas shown on Drawing No. FD-1007, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primerincluding taking out unservice-able Central Stiffener complete all as specified . |
| 67 | M&L SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3\"X2\"WITH OUT DRAWERas shown on Drawing No. FD-1007, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primerincluding taking out unserviceable Side Stiffener complete all as specified . |
| 68 | M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3\"X2\"WITH OUT DRAWERas shown on Drawing No. FD-1007, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer complete all as specified . |
| 69 | M&L removing/scrapping old worn out Paint from TABLE 3\"X2\"WITH OUT DRAWER(Drawing No. FD-1007) by Sand Paper/ Scrapper and applying Two Coats of , Synthetic Enamell Paint by Spray Painting Machine complete all as specified . |
| 70 | Table 3\"x2\" with DrawerFD-1008Removing the existing unserviceable part with the following new part :- |
| 71 | M&L TOP of TABLE 3\"X2\" WITHDRAWER of Prelaminated post forming MDF Board 18/19 mm thick duly rounded edges, exterior gradeproviding Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on Drawing No. FD-1008 including taking out unserviceable Top complete all as specified . |
| 72 | M&L DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE 3\"X2\" WITHDRAWER as shown on Drawing No. FD-1008, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable Drawer complete all as specified . |
| 73 | M&L CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3\"X2\" WITH DRAWER as shown on Drawing No. FD-1008, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unservice-able Central Stiffener complete all as specified . |
| 74 | M&L SIDE STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3\"X2\" WITH DRAWER as shown on Drawing No. FD-1008, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffener complete all as specified . |
| 75 | M&L Brass LOCK (MAKE : GODREJ) of TABLE 3\"X2\" WITHDRAWER and fixing as shown on Drawing No. FD-1008 including taking out unserviceable Lock complete all as specified . |
| 76 | M&L Mild Steel HANDLE of TABLE 3\"X2\" WITH DRAWER and fixing as shown on Drawing No. FD-1008 including taking out unserviceable Handle complete all as specified . |
| 77 | M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3\"X2\" WITH DRAWER as shown on Drawing No. FD-1008, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer complete all as specified . |
| 78 | M&L removing/scrapping old worn out Paint from TABLE 3\"X2\" WITHDRAWER (Drawing No. FD-1008) by Sand Paper/ Scrapper and applying Two Coats of , Synthetic Enamell Paint by Spray Painting Machine complete all as specified . |
| 79 | Table Dining OrsFD-165(M)Removing the existing unserviceable part with the following new part :- |
| 80 | M&L TOP of TABLE DINING ORS of Block Board 18/19 mm thick with 22 guage aluminium sheetshown on Drawing No. FD-165(M) including taking out unserviceable Top complete all as specified . |
| 81 | M&L Mild Steel Square Pipe of size 20mm, 1.6mm thick as LEG having length from 300mm to 500mm and fixing/ welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg complete all as specified . |
| 82 | M&L Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as LONG RAIL and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable Long Rail complete all as specified . |
| 83 | M&L Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as SHORT RAIL and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable Short Rail complete all as specified . |
| 84 | M&L Mild Steel Square/Round Pipe of size 25mm, 1.6mm thick as SIDE STIFFNER and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable Side Stiffner complete all as specified . |
| 85 | M&L Mild Steel Square Pipe of size 25mm, 1.6mm thick as CENTRAL STIFFNER and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable Central Stiffner complete all as specified . |
| 86 | M&L Complete removing/scrapping old worn out Paint from TABLE DINING ORS (Drawing No. FD-165(M) by Sand Paper/Scrapper and applying Two Coats of Synthetic Enamell Paint by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer complete all as specified . |
| 87 | Charpoy MS Tubing with plywood top FD/MAP-II/01Removing the existing unserviceable part with the following new part :- |
| 88 | M&L Plywood TOP 12mm thickBWR grade confirming to IS-303, ISI marked and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP as shown on Drawing No. FD/MAP-II/01 including taking out unserviceable Plywood Top complete all as specified . |
| 89 | M&L MIDDLE STIFFENER made out from Mild Steel Square Tube/Pipe 25x25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. FD/MAP-II/01, applying two coats of Synthetic enamel paint by spray painting machine over a coat of red oxide primer complete all as specified . |
| 90 | M&L Mild Steel CLIT of size 25x25x6mm with single hole on Short Rails for Support of Plywood Top and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. FD/MAP-II/01, applying two coats of Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified . |
| 91 | M&L Complete removing/scrapping old worn out Paint on Steel Surfaces of CHARPOY MS TUBING WITH PLYWOOD TOP (Drawing No. FD/MAP-II/01 by Sand Paper/Scrapper and applying One Coat of Synthetic Enamell Paint by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer complete all as specified . |
| 92 | Charpoy GI Pipe with Nylon Newar /Hardtop FD-220 Removing the existing unserviceable part with the following new part :- |
| 93 | M&L Complete Removing of unservicable long rail and Supply and Fixing new long rail of GI tubing 32 mm bore medium grade (ISI marked) duly threaded both ends all as per drg complete all as specified . |
| 94 | M&L Complete Removing of old unserviceable short railand making of 2 Nos short rails from long rails obtained from item No. (a) and threading the both ends of short rails and fixing in position complete all as specified . |
| 95 | M&L Complete Removing of old unserviceable legs and making of 2 Nos legs from short rails obtained from item No. (b) and threading the both ends of legs and fixing in position complete all as specified . |
| 96 | M&L Complete Removing of unserviceable 3 way elbow and S & F new GI elbow 32 mm diaas per drawing complete all as specified . |
| 97 | M&L CompleteRemoving of unserviceable check nuts and S & F new 32 mm dia GI Check nut (thickness of check nuts shall not be less than 8 mm) all as per drawing complete all as specified . |
| 98 | Removing of unserviceable Ply Wood/MDF from Charpoy GI Pipe tightening of loose components of (i.e.complete charpoy ).S&F Plywood12MM ThickBWR GradeISI marked confirming to IS-303 of required size (out of 7’x3’) complete all as specified . |
| 99 | Removing of U/S MS Flat Iron Stiffner of GI Charpoy Plytop. S&F new flat MS Stiffner of size 900 x 50 x 5mm and fixed with Nut & Bolt of size 75 x 6MM complete all as specified . |
| 100 | Locker Bed Side Steel FD-257, 1029 & Built In Removing the existing unserviceable part with the following new part :- |
| 101 | M&L SHELF made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf complete all as specified . |
| 102 | M&L DOOR made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable Door complete all as specified . |
| 103 | M&L LEG made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable Leg complete all as specified . |
| 104 | M&Laluminum HASP & STAPPLEof size 100mmfor LOCKER BED SIDE STEEL and fixed as shown on Drawing No. FD-257 & FD-1029including taking out unserviceable Hasp & Stapple complete all as specified . |
| 105 | M&L Chromium platedMild Steel HANDLE of LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Handle complete all as specified . |
| 106 | M&L Mild Steel HINGE 50mm in size suitable for LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hinge, complete all as specified . |
| 107 | M&L Complete removing/scrapping old worn out Paint from LOCKER BED SIDE STEEL (Drawing No. FD-257 & FD-1029) by Sand Paper/Scrapper and applying two Coat of , Synthetic Enamell Paint by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. Outer side of front doors of Locker Shall be painted in blue/brown colour and remaining portion shall be painted in Light Grey/Off White colour complete all as specified . |
| 108 | Rack steel 6 tierFD-106 FD- 1038 Removing the existing unserviceable part with the following new part :- |
| 109 | M&L SHELF made out of 1.0mm thick Mild Steel Sheet ofRACK 6 TIER STEEL and made to shape and size as shown on Drawing No. FD-106/1038applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf complete all as specified . |
| 110 | Taking out unservisiable ANGLE IRON and supply & fixing new angle iron fo size 40x40x4 mm for FD-1038 and 30x30x3mm for FD-106 ofRACK 6 TIER STEEL alongwith PVC bush as shown on Drawing, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable Shelf complete all as specified . |
| 111 | M&L Complete removing/scrapping old worn out Paint from RACK 6 TIER STEEL (Drawing No. FD-106 & FD-1038) by Sand Paper/Scrapper and applying two Coat of , Synthetic Enamell Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer complete all as specified . |
| 112 | Trestle store steelFD-1043 Removing the existing unserviceable part with the following new part :- |
| 113 | M&Lwelding (full round of angle as a one spot) ofbroken part of TRESTLE STORE STEEL as shown on Drawing No. FD-1043, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of (Black Colour) Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable part complete all as specified . |
| 114 | M&L Complete removing/scrapping old worn out Paint from TRESTLE STORE STEEL (Drawing No. FD-1043) by Sand Paper/Scrapper and applying One Coat of , Synthetic Enamell Paint by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer complete all as specified . |
| 115 | Table 900x 900x760 mm steel FD-1009 Removing the existing unserviceable part with the following new part :- |
| 116 | M&L TOP of TABLE 3\"X3\"WITH OUT DRAWER of Prelaminated post forming MDF Board 18/19 mm thick duly round edges, exterior grade providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-1009including taking out unserviceable Top complete all as specified . |
| 117 | M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3\"X3\"WITH OUT DRAWERas shown on Drawing No. FD-1009, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer complete all as specified . |
| 118 | M&L removing/scrapping old worn out Paint from TABLE 3\"X3\"WITH OUT DRAWER(Drawing No. FD-1009) by Sand Paper/ Scrapper and applying Two Coats of , Synthetic Enamell Paint (as approved) by Spray Painting Machine complete all as specified . |
| 119 | M&Lwelding (full round on pipe as a one spot) ofbroken part of TABLE 3\"X3\" STEEL as shown on Drawing No. FD-1009, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Synthetic enamel paintby spray painting machine over a coat of red oxide primer including taking out unserviceable part complete all as specified . |
| 120 | Table 900x 900x760 mm steel FD-1009 Removing the existing unserviceable part with the following new part :- |
| 121 | M&L HEAD SIDE BOARD of BED HARD MS TUBINGof Prelaminated Particle Board 18/19mm thick, exterior grade and fixing as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Head Side Board complete all as specified . |
| 122 | M&L foot rest board of bed hard MS Tubing of Prelaminated Particle Board 18/19mm thick, exterior grade and fixing as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Foot Rest Board complete all as specified . |
| 123 | M&L Plywood top 12mm thickBWR grade confirming to IS-303, ISI marked and fixing to BED HARD MS TUBING as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Plywood Top complete all as specified . |
| 124 | M&L middle stiffener made out from Mild Steel Square Tube/Pipe 25x25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to BED HARD MS TUBING and fixing as shown on Drawing No. FD/E6/MAP/08R, applying two coats of Synthetic enamel paint by spray painting machine over a coat of red oxide primer complete all as specified . |
| 125 | M&L Mild Steel CLIT of size 25x25x6mm with single hole on Short Rails for Support of Plywood Top and fixing to BED HARD MS TUBINGand fixing as shown on Drawing No. FD/E6/MAP/08R, applying two coats of Synthetic enamel paint by spray painting machine over a coat of red oxide primer complete all as specified . |
| 126 | M&L Complete removing/scrapping old worn out Paint on Steel Surfaces of BED HARD MS TUBING (Drawing No. FD/E6/MAP/08R by Sand Paper/Scrapper and applying One Coat of Synthetic Enamell Paint by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer complete all as specified . |
| 127 | Form with Back FD-78 Removing the existing unserviceable part with the following new part :- |
| 128 | M&L SEATofFORM WITH BACK made of single plank of teak wood of size 1800x255x25mm as shown on Drawing No. FD-78including taking out unserviceable seat complete all as specified . |
| 129 | M&L BACKofFORM WITH BACK made of single plank of teak wood of size 1800x150x19mm as shown on Drawing No. FD-78including taking out unserviceable seat complete all as specified . |
| 130 | M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm x1.6 mm thick(as required) for FORM WITH BACKas shown on Drawing No. FD-78 necessary preperation of surfaces, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer complete all as specified . |
| 131 | M&L removing/scrapping old worn out Paint from FORM WITH BACK (Drawing No. FD-78) by Sand Paper/ Scrapper and applying Two Coats of , Synthetic Enamell Paintby Spray Painting Machine complete all as specified . |
| 132 | M&Lwelding (full round on pipe as a one spot) ofbroken part of FORM WITH BACK as shown on Drawing No. FD-78, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable part complete all as specified. |
| 133 | Form with Back FD-78 Removing the existing unserviceable part with the following new part :- |
| 134 | M&L SEATofFORM WITHOUT BACK made of single plank of teak wood of size 1800x255x25mm as shown on Drawing No. FD-77/ FD-1027including taking out unserviceable seat complete all as specified . |
| 135 | M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm x1.6 mm thick(as required) for FORM WITHOUT BACKas shown on Drawing No. FD-77 / FD-1027 necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified . |
| 136 | M&L removing/scrapping old worn out Paint from FORM WITHOUT BACK (Drawing No. FD-7&/ FD-1027) by Sand Paper/ Scrapper and applying Two Coats of , Synthetic Enamell Paint by Spray Painting Machine complete all as specified . |
| 137 | M&Lwelding (full round on pipe as a one spot) ofbroken part of FORM WITHOUT BACK as shown on Drawing No. FD-77/ FD-1027 rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable part complete all as specified . |
| 138 | Teapoy Varandha Fd/E6/MAP/18, FD 383 & FD-255Removing the existing unserviceable part with the following new part :- |
| 139 | M&L TOP of TEAPOY VARANDHA of Prelaminated postforming MDF Board 18/19 mm thick, exterior grade duly round edges providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD/E6/MAP/18 or FD- 255 including taking out unserviceable Top complete all as specified . |
| 140 | M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 18mm x 1.6 mm thick / 20 mm round pipe 1.6 mm thick (as required) for TEAPOY VARANDHAas shown on Drawing No. FD/E6/MAP/18 and FD-1009, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer complete all as specified . |
| 141 | M&L removing/scrapping old worn out Paint from TEAPOY VARANDHA(Drawing No. FD/E6/MAP/18 and FD-255) by Sand Paper/ Scrapper and applying Two Coats of , Synthetic Enamell Paint by Spray Painting Machine complete all as specified . |
| 142 | M&Lwelding (full round on pipe as a one spot) ofbroken part of TEAPOY as shown on Drawing No. FD/E6/MAP/18 and FD-255, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable part complete all as specified . |
| 143 | Chair School with Hand Board FD/E6/MAP/05Removing the existing unserviceable part with the following new part :- |
| 144 | M&L Moulded PVC/wooden seat and backof CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05 including taking out unserviceable seat back complete all as specified . |
| 145 | M&L for Welding of Broken Leg with Mild Steel Round Pipe of size 20mm x 1.6 mm thick (as required) for CHAIR SCHOOL WITH HAND BOARDas shown on Drawing No. FD/E6/MAP/05, necessary preperation of surfaces, applying two coats of , Synthetic enamel paint by spray painting machine over a coat of red oxide primer complete all as specified . |
| 146 | M&L for hand boardfor CHAIR SCHOOL WITH HAND BOARDrepalce with Prelaminated MDF board exterior gradeof thickness 18/19mm thick as shown on Drawing No. FD/E6/MAP/05 complete all as specified . |
| 147 | M&L removing/scrapping old worn out Paint from CHAIR SCHOOL WITH HAND BOARD(Drawing No. FD/E6/MAP/05 by Sand Paper/ Scrapper and applying Two Coats of , Synthetic Enamell Pain by Spray Painting Machine complete all as specified . |
| 148 | M&Lwelding (full round on pipe as a one spot) ofbroken part of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05 rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Synthetic enamel paint by spray painting machine over a coat of red oxide primer including taking out unserviceable part complete all as specified . |
| 149 | S&F HARD RUBBER/PVC SHOE superior qualityfixing to Leg of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05including taking out unserviceable Shoe complete all as specified . |
| 150 | Rack steel1905x1830x760mm FD-129.Removing the existing unserviceable part with the following part :- |
| 151 | M&L removing/scrapping old worn out Paint from Rack steel(Drawing No. FD-129 by sand paper/Scrapper and applying Two Coats of Synthetic Enamell Paint by Spray Painting Machine complete all as specified . |
| 152 | Metal shelving Rack adj 3 tier FD/BNR-04/2004 .Removing the existing unserviceable part with the following part :- |
| 153 | M&L removing/scrapping old worn out Paint from Metal shelving rack 3050x900x500 mm(Drawing No. FD-GE/BNR-04/2004 by sand paper/Scrapper and applying Two Coats of Synthetic Enamell Paint by Spray Painting Machine complete all as specified . |
| 154 | Rack shoe steel FD/E6/MAP/02 (R) .Removing the existing unserviceable part with the following part :- |
| 155 | M&L removing/scrapping old worn out Paint from Rack shoe steel Drawing No. FD-FD/E6/MAP/02 (R) by sand paper/Scrapper and applying Two Coats of Synthetic Enamell Paint by Spray Painting Machine complete all as specified . |
| 156 | S&F HARD RUBBER/PVC SHOE superior quality fixing to Leg of Rack Shoe steel as shown on Drawing No. FD/E6/MAP/02 (R)including taking out unserviceable Shoe complete all as specified . |
| 157 | Computer Table various sizeTP,FD/E6/MAP/03. Removing the existing unserviceable part with the following part :- |
| 158 | M&L for replacement of old/broken table top of COMPUTER TABLE with new table top made out of prelaminatedMDF Board 18/19 mm thick, exterior grade with 4mm TW beading all around duly polished all as shown in drg and as per the direction of Engr -in-Charge. |
| 159 | M&L for replacement of broken key board tray of COMPUTER TABLE with new key board tray made out of 18mm thick prelaminated exterior grade MDF Board all as shown in drg and as per the direction of Engr -in-Charge |
| 160 | M&L for replacement of telescopic piano type hinges of broken key board trayof COMPUTER TABLE with new telescopic piano type hingesall as shown in drg and as per the direction of Engr -in-Charge |
| 161 | Rack side 4 space steel FD-1023.Removing the existing unserviceable part with the following part :- |
| 162 | M&L removing/scrapping old worn out Paint from Rack side 4 spaces steel Drawing No. FD-FD-1023 by sand paper/Scrapper and applying Two Coats of Synthetic Enamell Paint by Spray Painting Machine complete all as specified . |
| 163 | Table 2100x900x760 mm FD-1013. Removing the existing unserviceable part with the following part :- |
| 164 | M&L removing/scrapping old worn out Paint from Table 2100x900x760 mmDrawing No. FD-FD-1013 by sand paper/Scrapper and applying Two Coats of Synthetic Enamell Paint by Spray Painting Machine complete all as specified . |
| 165 | M&L removing old top from Table 2100x900x760 mm and replace with new top ofpost forming prelaminated MDFboard exterior grade of 18 mm Drawing No. FD-1023 complete all as specified and as directed. |
| 166 | Table bedsideFD/E6/MAP/15RRemoving the existing unserviceable part with the following new part :- |
| 167 | M&L removing old top from Table bedside and replace with new top of 18/19 mm thick exterior grade prelaminated partical board .Drawing No. FD-FD/E6/MAP/15R complete all as specified. |
| 168 | M&L removing old drawer with knob from Table bedside and replace with new drawer with knob of 18/19 mm thick exterior grade prelaminated partical board with knob.Drawing No. FD-FD/E6/MAP/15R complete all as specified . |
| 169 | M&L removing old box from Table bedside and replace with new box of 18/19 mm thick exterior grade prelaminated partical board. Drawing No. FD-FD/E6/MAP/15R complete all as specified . |
| 170 | M&L removing back from Table bedside and replace with new back of18/19 mm thick exterior grade prelaminated partical board,Drawing No. FD-FD/E6/MAP/15R complete all as specified . |
| 171 | M&L removing/scrapping old worn out Paint from Table bedside Drawing No. FD/E6/MAP/15R by sand paper/Scrapper and applying Two Coats of Synthetic Enamell Paint by Spray Painting Machine complete all as specified . |
| 172 | Book case steel FD-69M &1028 Removing the existing unserviceable part with the following new part :- |
| 173 | M&L in replacement of steel handle with new handle of size 100 mm long to fix in shutter of compartment of Book case steel Drawing No. FD-1028 complete all as specified . |
| 174 | M&L in replacement of locking device with lock 50 mm dia four lever of Book case steel Drawing No. FD-1028 complete all as specified . |
| 175 | M&L in replacement of broken glass 5.5 mm thick to shutter of compartment, where required with existing match of Book case steel Drawing No. FD-1028 complete all as specified . |
| 176 | M&L removing/scrapping old worn out Paint from Book case steel Drawing No. FD-1028 by sand paper/Scrapper and applying Two Coats of Synthetic Enamell Paint by Spray Painting Machine, complete all as specified and as directed. Outer side of front sliding doors of Book case Shall be painted in blue/brown colour &remaining portionpainted in Light Grey/Off White colour complete all as specified . |
| 177 | Chair Easy SteelFD-121. Removing the existing unserviceable part with the following part :- |
| 178 | Cushion forSeat :Removing of existing U/S cushion for seat alongwith u/s ply from seat of Chair Easy Steel andS & F new foam cushion 75 mm thick 32 density over suitable sized 12mm thick ply wood duly stiched with fine standard thread on one side as approved by GE/Engr-in-Charge.Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM) |
| 179 | Cushion forBack:Removing of existing U/S cushion for back alongwith u/s ply from back of Chair Easy Steel andS & F new foam cushion 75 mm thick 32 density over suitable sized 12mm thick ply wood duly stiched with fine standard thread on one side as approved by GE/Engr-in-Charge.Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM) |
| 180 | M&L ARMS REST with cushion made out of Second Class Hardwood of CHAIR EASY STEEL, fixed with suitable size Screwsas shown on Drawing No. FD-121 including taking out unserviceable Arms Rest with cushion complete all as specified . |
| 181 | S&F PVC CAP at the top of Back Steel MS Square Pipe of CHAIR EASY STEEL as shown on Drawing No. FD-121 including taking out unserviceable Cap complete all as specified . |
| 182 | S&F HARD RUBBER SHOE superior qualityfixing to Leg ofCHAIR EASY STEEL as shown on Drawing No. FD-121including taking out unserviceable Shoe complete all as specified . |
| 183 | M&L removing/scrapping old worn out Paint from exposed Steel Frame ofCHAIR EASY STEEL as shown on Drawing No. FD-121 by Sand Paper/ Scrapper and applying one coat of Synthetic Enamell Paint by Spray Painting Machine complete all as specified . |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
