Water Resources and Irrigation Government Departments Closing in 0 days TDR #52511481

Tender For Procurement Of Spares For Annual Overhauling And Day To Day Maintenance Work In Rihand Power Station Pipri.

Issued by Government Departments · pipri, Uttar Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Dec 2025
0 days left
EMD
33000
Bank guarantee accepted
Document Fee
2065
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
pipri → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Procurement Of Spares For Annual Overhauling And Day To Day Maintenance Work In Rihand Power Station Pipri.2 Round HD Screw M10 x 40mm 3 Allen Screw (SS) 3/8”x 1.0” BSF Thread 4 Allen Screw (SS) 5/16”x 1.0” BSF Thread 5 Hexagonal Bolt (Carbon Steel ) M10 x 100 mm x 8.8 6 Generator Window Bolt (Carbon Steel ) Size-5/8”x 38 mm 7 Stud and Nut (MS) Size- ¾”x 85mm Thread-BSF 8 Stud and Nut (MS) Size- ¾”x 60 mm Thread-BSF 9 MS stud with nut Size-¾”x 7’, BSW, thread-2” 10 HT Nut, Bolt & Washer M18 × 100 11 Brass sim for guide vane seal Size-0.5 mm 12 Hexagonal Bolt (Carbon Steel ) M24×120 mm Tensile pr.10.9 kgf / mm² 13 Hexagonal Nut (Carbon Steel )M24 Tensile pr–10.9 kgf / mm² 14 Single coil spring washer (Carbon Steel ) ID- 24mm, OD -30 mm 15 Expansion Joint Stud Dia. - 1” , Length - 15” Thread – Full, BSW Hardness, Toughness & Blacken - 40 to 50 HRC 16 Expansion Joint Nut Thread - 1” BSW Hardness, Toughness & Blacken - 40 to 50 HRC 17 Hexagonal Bolt (Carbon Steel ) M22×100 mm 18 Hexagonal Nut (Carbon Steel )M22X2.5 19 Hardened washer (Carbon Steel ) M22 20 Hexagonal Bolt (Carbon Steel ) M16×110 mm 21 Hexagonal Nut (Carbon Steel )M16X2 22 Hardened washer (Carbon Steel ) M16 23 Hexagonal Bolt (Carbon Steel ) 12 TPI, M20×52 mm Brake liner bolt as per sample 24 Hexagonal Nut (Carbon Steel )M20X2.5 25 Hardened washer (Carbon Steel ) M20 26 Hexagonal Bolt (Carbon Steel ) M18×75 mm 27 Hexagonal Nut (Carbon Steel )M18X2.5 28 Single coil spring washer (Carbon Steel ) M18 29 Hexagonal Bolt (Carbon Steel ) M24×75 mm Tensile pr.10.9 kgf / mm² 30 Hexagonal Bolt (Carbon Steel ) M24×100 mm Tensile pr.10.9 kgf / mm² 31 Hardened washer (Carbon Steel ) M24 32 Guide Vane seal (Top) 33 Guide Vane seal (Bottom) 34 Nylon Rope Rope dia 25 mm 35 Nylon Rope Rope dia 10 mm 36 Hack Saw Blade Size- ½”x12” 37 Power Hexa blade Size- 18”x1”x0.050” 38 PVC pipe embedded with cotton thread Dia- 1¼, Thickness-5.0 mm 39 Lub. Oil Filter Material – Brass 40 Air compressor model no 231- Tune up kit Part no – 37123718 41 Lifting strap, Eye at both ends, Working load : 3 Ton, Length : 5 mtr 42 Lifting strap, Eye at both ends, Working load : 3 Ton, Length : 10 mtr 43 ‘O’ ring 05 mm (Rubber cord Neoprene rubber) 44 ‘O’ ring 07 mm (Rubber cord Neoprene rubber) 45 ‘O’ ring 6 mm (Rubber cord Neoprene rubber) 46 ‘O’ ring 8 mm (Rubber cord Neoprene rubber) 47 Leatherised packing 1.0 mm thick x 1.0 mtr.wide 48 Leatherised packing 2.0 mm thick x 1.0 mtr.wide 49 Leatherised packing 3.0 mm thick x 1.0 mtr.wide 50 Leatherised packing 5.0 mm thick x 1.0 mtr.wide 51 Neoprene Rubber Seal 6.0 mm x 1.0 mtr 52 Neoprene Rubber Seal 3.0 mm x 1.0 mtr 53 Asbestos graphite gland packing 1/2 54 Leather Cork sheet Size- 05 mm 55 Leather Cork sheet Size- 03 mm 56 Leather Cork sheet Size- 02 mm 57 Rubber/ Teflon bearing suitable for BHR- 28 Dewatering Pump 58 Rubber/ Teflon bearing suitable for BHR – 42 Dewatering Pump 59 Rubber/ Teflon bearing suitable for Impeller Shaft of BHR – 42 Dewatering Pump 60 Pressure switch for intake gate, 6 inch, Operating voltage 220 V DC, 2 NO & 2 NC, 30 VA 61 TGB Cooling pipe line Seamless, with floating flange, mat- Cu (07 pipe per set) 62 Mechanical seal of Tushaco make triple screw Intake gate power pack, Model T3S 32/38wd 63 Head shaft for BHR - 42 dewatering pump with shaft sleeve and Nut 64 Chuck nut suitable for BHR-42 Head shaft 65 Hose pipe, 0-70 bar pressure carrying capacity for centrifusing machine 66 4 Pole power contactor NHD series 415 V AC, 25 amp, Cat no-NON with auxiliary contact block NHD 67 3 Phase failure relay 380 – 440 V Model no D2 VMR1 Range CE/CSA 68 Electronic Multifunctional Timer, 15 Time setting range, Range-( 0.05sec -100 hr), coil voltage 24-240 AC/DC Type 3RP1505-1APW308K 69 Over Load relay, 3UA-5500-2D 70 3 pole Power Contractor 415V, 32A, 3TF3400-OA-MO, front 4 mounting Auxiliary contact 71 Wide band compact LED indicating lamps 24 V-240 VAC & 24V – 220V DC, (Red+Green + Amber + White) 10 No. Each 72 Wide band compact LED indicating lamps 24 V-240 VAC & 24V – 220V DC, (Blue) 73 Wide band compact LED indicating lamps 24 V-240 VAC & 24V – 220V DC, (yellow) 74 3 pole Power Contractor 220V DC,22A, 3TF3300 – 0B, front 4 mounting Auxiliary contact 75 3 pole Power Contractor 415V, 22A, 3TF3300-OA-MO, front 4 mounting Auxiliary contact 76 Auxiliary contact block NC 3TX4001-2A 77 Auxiliary contact block NO 3TX4010-2A 78 AC Auxiliary contactors, 230 V AC, 10A, 50Hz, 2NO + 2NC Type – 3RH2122-1A..0 79 DC Auxiliary contactors, 220 V DC, 10A, 2NO + 2NC Type – 3RH2122-1B..0 80 Flow switch for bearing oil cooler, Operating voltage 220 V DC 81 3 pole Power Contractor 415V, 140A, 3TF51, 2NO+2NC Auxiliary contact 82 3 pole Power Contractor 415V, 170A, 3TF52, 2NO+2NC Auxiliary contact 83 3 pole Power Contractor 415V, 40A, MC10D1N22M, 2NO+2NC Auxiliary contact 84 3 pole Power Contractor 415V, 70A, MC10EN22M, 2NO+2NC Auxiliary contact 85 Heavy duty Control transformer, 5KVA, Primary voltage 380-400-415 V, Secondary Voltage – 230 V Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select % 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

BOQ

Name of Work:- Procurement Of Spares For Annual Overhauling And Day To Day Maintenance Work In Rihand Power Station Pipri.
Sl. No. Item Description
1Item Wise BoQ BoQ_Ver3.0 Item Wise Normal INR Only INR Select, Excess (+), Less (-) Tender Inviting Authority: Executive Engineer, Electricity Generation Division, Pipri Name of Work: Procurement of spares for annual overhauling and day to day maintenance work in Rihand Power Station Pipri. Contract No: 26/EGD/2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER NUMBER TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Nature of Medicine Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty (If Applicable) (in. Rs.) GST(If Applicable) (In Rs.) VAT/ CST/ Sales Tax (in. Rs.) Freight & Transit Insurance Charges (in. Rs.) P&F Charges(in. Rs.) IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With Taxes per item TOTAL AMOUNT Without Taxes TOTAL AMOUNT In Words (RATES ARE TO BE EXCLUSIVE OF TAXES, WHICH SHALL BE PAID EXTRA AS PER RULE)
2Round HD Screw M10 x 40mm
3Allen Screw (SS) 3/8”x 1.0” BSF Thread
4Allen Screw (SS) 5/16”x 1.0” BSF Thread
5Hexagonal Bolt (Carbon Steel ) M10 x 100 mm x 8.8
6Generator Window Bolt (Carbon Steel ) Size-5/8”x 38 mm
7Stud and Nut (MS) Size- ¾”x 85mm Thread-BSF
8Stud and Nut (MS) Size- ¾”x 60 mm Thread-BSF
9MS stud with nut Size-¾”x 7’, BSW, thread-2”
10HT Nut, Bolt & Washer M18 × 100
11Brass sim for guide vane seal Size-0.5 mm
12Hexagonal Bolt (Carbon Steel ) M24×120 mm Tensile pr.10.9 kgf / mm²
13Hexagonal Nut (Carbon Steel )M24 Tensile pr–10.9 kgf / mm²
14Single coil spring washer (Carbon Steel ) ID- 24mm, OD -30 mm
15Expansion Joint Stud Dia. - 1” , Length - 15” Thread – Full, BSW Hardness, Toughness & Blacken - 40 to 50 HRC
16Expansion Joint Nut Thread - 1” BSW Hardness, Toughness & Blacken - 40 to 50 HRC
17Hexagonal Bolt (Carbon Steel ) M22×100 mm
18Hexagonal Nut (Carbon Steel )M22X2.5
19Hardened washer (Carbon Steel ) M22
20Hexagonal Bolt (Carbon Steel ) M16×110 mm
21Hexagonal Nut (Carbon Steel )M16X2
22Hardened washer (Carbon Steel ) M16
23Hexagonal Bolt (Carbon Steel ) 12 TPI, M20×52 mm Brake liner bolt as per sample
24Hexagonal Nut (Carbon Steel )M20X2.5
25Hardened washer (Carbon Steel ) M20
26Hexagonal Bolt (Carbon Steel ) M18×75 mm
27Hexagonal Nut (Carbon Steel )M18X2.5
28Single coil spring washer (Carbon Steel ) M18
29Hexagonal Bolt (Carbon Steel ) M24×75 mm Tensile pr.10.9 kgf / mm²
30Hexagonal Bolt (Carbon Steel ) M24×100 mm Tensile pr.10.9 kgf / mm²
31Hardened washer (Carbon Steel ) M24
32Guide Vane seal (Top)
33Guide Vane seal (Bottom)
34Nylon Rope Rope dia 25 mm
35Nylon Rope Rope dia 10 mm
36Hack Saw Blade Size- ½”x12”
37Power Hexa blade Size- 18”x1”x0.050”
38PVC pipe embedded with cotton thread Dia- 1¼, Thickness-5.0 mm
39Lub. Oil Filter Material – Brass
40Air compressor model no 231- Tune up kit Part no – 37123718
41Lifting strap, Eye at both ends, Working load : 3 Ton, Length : 5 mtr
42Lifting strap, Eye at both ends, Working load : 3 Ton, Length : 10 mtr
43‘O’ ring 05 mm (Rubber cord Neoprene rubber)
44‘O’ ring 07 mm (Rubber cord Neoprene rubber)
45‘O’ ring 6 mm (Rubber cord Neoprene rubber)
46‘O’ ring 8 mm (Rubber cord Neoprene rubber)
47Leatherised packing 1.0 mm thick x 1.0 mtr.wide
48Leatherised packing 2.0 mm thick x 1.0 mtr.wide
49Leatherised packing 3.0 mm thick x 1.0 mtr.wide
50Leatherised packing 5.0 mm thick x 1.0 mtr.wide
51Neoprene Rubber Seal 6.0 mm x 1.0 mtr
52Neoprene Rubber Seal 3.0 mm x 1.0 mtr
53Asbestos graphite gland packing 1/2\"
54Leather Cork sheet Size- 05 mm
55Leather Cork sheet Size- 03 mm
56Leather Cork sheet Size- 02 mm
57Rubber/ Teflon bearing suitable for BHR- 28 Dewatering Pump
58Rubber/ Teflon bearing suitable for BHR – 42 Dewatering Pump
59Rubber/ Teflon bearing suitable for Impeller Shaft of BHR – 42 Dewatering Pump
60Pressure switch for intake gate, 6 inch, Operating voltage 220 V DC, 2 NO & 2 NC, 30 VA
61TGB Cooling pipe line Seamless, with floating flange, mat- Cu (07 pipe per set)
62Mechanical seal of Tushaco make triple screw Intake gate power pack, Model T3S 32/38wd
63Head shaft for BHR - 42 dewatering pump with shaft sleeve and Nut
64Chuck nut suitable for BHR-42 Head shaft
65Hose pipe, 0-70 bar pressure carrying capacity for centrifusing machine
664 Pole power contactor NHD series 415 V AC, 25 amp, Cat no-NON with auxiliary contact block NHD
673 Phase failure relay 380 – 440 V Model no D2 VMR1 Range CE/CSA
68Electronic Multifunctional Timer, 15 Time setting range, Range-( 0.05sec -100 hr), coil voltage 24-240 AC/DC Type 3RP1505-1APW308K
69Over Load relay, 3UA-5500-2D
703 pole Power Contractor 415V, 32A, 3TF3400-OA-MO, front 4 mounting Auxiliary contact
71Wide band compact LED indicating lamps 24 V-240 VAC & 24V – 220V DC, (Red+Green + Amber + White) 10 No. Each
72Wide band compact LED indicating lamps 24 V-240 VAC & 24V – 220V DC, (Blue)
73Wide band compact LED indicating lamps 24 V-240 VAC & 24V – 220V DC, (yellow)
743 pole Power Contractor 220V DC,22A, 3TF3300 – 0B, front 4 mounting Auxiliary contact
753 pole Power Contractor 415V, 22A, 3TF3300-OA-MO, front 4 mounting Auxiliary contact
76Auxiliary contact block NC 3TX4001-2A
77Auxiliary contact block NO 3TX4010-2A
78AC Auxiliary contactors, 230 V AC, 10A, 50Hz, 2NO + 2NC Type – 3RH2122-1A..0
79DC Auxiliary contactors, 220 V DC, 10A, 2NO + 2NC Type – 3RH2122-1B..0
80Flow switch for bearing oil cooler, Operating voltage 220 V DC
813 pole Power Contractor 415V, 140A, 3TF51, 2NO+2NC Auxiliary contact
823 pole Power Contractor 415V, 170A, 3TF52, 2NO+2NC Auxiliary contact
833 pole Power Contractor 415V, 40A, MC10D1N22M, 2NO+2NC Auxiliary contact
843 pole Power Contractor 415V, 70A, MC10EN22M, 2NO+2NC Auxiliary contact
85Heavy duty Control transformer, 5KVA, Primary voltage 380-400-415 V, Secondary Voltage – 230 V Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select % 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 52511481
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 11-12-2025
Authority
Authority Name Uttar Pradesh Jal Vidyut Nigam Limited
Work Description Procurement Of Spares For Annual Overhauling And Day To Day Maintenance Work In Rihand Power Station Pipri.2 Round HD Screw M10 x 40mm 3 Allen Screw (SS) 3/8”x 1.0” BSF Thread 4 Allen Screw (SS) 5/16”x 1.0” BSF Thread 5 Hexagonal Bolt (Carbon Steel ) M10 x 100 mm x 8.8 6 Generator Window Bolt (Carbon Steel ) Size-5/8”x 38 mm 7 Stud and Nut (MS) Size- ¾”x 85mm Thread-BSF 8 Stud and Nut (MS) Size- ¾”x 60 mm Thread-BSF 9 MS stud with nut Size-¾”x 7’, BSW, thread-2” 10 HT Nut, Bolt & Washer M18 × 100 11 Brass sim for guide vane seal Size-0.5 mm 12 Hexagonal Bolt (Carbon Steel ) M24×120 mm Tensile pr.10.9 kgf / mm² 13 Hexagonal Nut (Carbon Steel )M24 Tensile pr–10.9 kgf / mm² 14 Single coil spring washer (Carbon Steel ) ID- 24mm, OD -30 mm 15 Expansion Joint Stud Dia. - 1” , Length - 15” Thread – Full, BSW Hardness, Toughness & Blacken - 40 to 50 HRC 16 Expansion Joint Nut Thread - 1” BSW Hardness, Toughness & Blacken - 40 to 50 HRC 17 Hexagonal Bolt (Carbon Steel ) M22×100 mm 18 Hexagonal Nut (Carbon Steel )M22X2.5 19 Hardened washer (Carbon Steel ) M22 20 Hexagonal Bolt (Carbon Steel ) M16×110 mm 21 Hexagonal Nut (Carbon Steel )M16X2 22 Hardened washer (Carbon Steel ) M16 23 Hexagonal Bolt (Carbon Steel ) 12 TPI, M20×52 mm Brake liner bolt as per sample 24 Hexagonal Nut (Carbon Steel )M20X2.5 25 Hardened washer (Carbon Steel ) M20 26 Hexagonal Bolt (Carbon Steel ) M18×75 mm 27 Hexagonal Nut (Carbon Steel )M18X2.5 28 Single coil spring washer (Carbon Steel ) M18 29 Hexagonal Bolt (Carbon Steel ) M24×75 mm Tensile pr.10.9 kgf / mm² 30 Hexagonal Bolt (Carbon Steel ) M24×100 mm Tensile pr.10.9 kgf / mm² 31 Hardened washer (Carbon Steel ) M24 32 Guide Vane seal (Top) 33 Guide Vane seal (Bottom) 34 Nylon Rope Rope dia 25 mm 35 Nylon Rope Rope dia 10 mm 36 Hack Saw Blade Size- ½”x12” 37 Power Hexa blade Size- 18”x1”x0.050” 38 PVC pipe embedded with cotton thread Dia- 1¼, Thickness-5.0 mm 39 Lub. Oil Filter Material – Brass 40 Air compressor model no 231- Tune up kit Part no – 37123718 41 Lifting strap, Eye at both ends, Working load : 3 Ton, Length : 5 mtr 42 Lifting strap, Eye at both ends, Working load : 3 Ton, Length : 10 mtr 43 ‘O’ ring 05 mm (Rubber cord Neoprene rubber) 44 ‘O’ ring 07 mm (Rubber cord Neoprene rubber) 45 ‘O’ ring 6 mm (Rubber cord Neoprene rubber) 46 ‘O’ ring 8 mm (Rubber cord Neoprene rubber) 47 Leatherised packing 1.0 mm thick x 1.0 mtr.wide 48 Leatherised packing 2.0 mm thick x 1.0 mtr.wide 49 Leatherised packing 3.0 mm thick x 1.0 mtr.wide 50 Leatherised packing 5.0 mm thick x 1.0 mtr.wide 51 Neoprene Rubber Seal 6.0 mm x 1.0 mtr 52 Neoprene Rubber Seal 3.0 mm x 1.0 mtr 53 Asbestos graphite gland packing 1/2 54 Leather Cork sheet Size- 05 mm 55 Leather Cork sheet Size- 03 mm 56 Leather Cork sheet Size- 02 mm 57 Rubber/ Teflon bearing suitable for BHR- 28 Dewatering Pump 58 Rubber/ Teflon bearing suitable for BHR – 42 Dewatering Pump 59 Rubber/ Teflon bearing suitable for Impeller Shaft of BHR – 42 Dewatering Pump 60 Pressure switch for intake gate, 6 inch, Operating voltage 220 V DC, 2 NO & 2 NC, 30 VA 61 TGB Cooling pipe line Seamless, with floating flange, mat- Cu (07 pipe per set) 62 Mechanical seal of Tushaco make triple screw Intake gate power pack, Model T3S 32/38wd 63 Head shaft for BHR - 42 dewatering pump with shaft sleeve and Nut 64 Chuck nut suitable for BHR-42 Head shaft 65 Hose pipe, 0-70 bar pressure carrying capacity for centrifusing machine 66 4 Pole power contactor NHD series 415 V AC, 25 amp, Cat no-NON with auxiliary contact block NHD 67 3 Phase failure relay 380 – 440 V Model no D2 VMR1 Range CE/CSA 68 Electronic Multifunctional Timer, 15 Time setting range, Range-( 0.05sec -100 hr), coil voltage 24-240 AC/DC Type 3RP1505-1APW308K 69 Over Load relay, 3UA-5500-2D 70 3 pole Power Contractor 415V, 32A, 3TF3400-OA-MO, front 4 mounting Auxiliary contact 71 Wide band compact LED indicating lamps 24 V-240 VAC & 24V – 220V DC, (Red+Green + Amber + White) 10 No. Each 72 Wide band compact LED indicating lamps 24 V-240 VAC & 24V – 220V DC, (Blue) 73 Wide band compact LED indicating lamps 24 V-240 VAC & 24V – 220V DC, (yellow) 74 3 pole Power Contractor 220V DC,22A, 3TF3300 – 0B, front 4 mounting Auxiliary contact 75 3 pole Power Contractor 415V, 22A, 3TF3300-OA-MO, front 4 mounting Auxiliary contact 76 Auxiliary contact block NC 3TX4001-2A 77 Auxiliary contact block NO 3TX4010-2A 78 AC Auxiliary contactors, 230 V AC, 10A, 50Hz, 2NO + 2NC Type – 3RH2122-1A..0 79 DC Auxiliary contactors, 220 V DC, 10A, 2NO + 2NC Type – 3RH2122-1B..0 80 Flow switch for bearing oil cooler, Operating voltage 220 V DC 81 3 pole Power Contractor 415V, 140A, 3TF51, 2NO+2NC Auxiliary contact 82 3 pole Power Contractor 415V, 170A, 3TF52, 2NO+2NC Auxiliary contact 83 3 pole Power Contractor 415V, 40A, MC10D1N22M, 2NO+2NC Auxiliary contact 84 3 pole Power Contractor 415V, 70A, MC10EN22M, 2NO+2NC Auxiliary contact 85 Heavy duty Control transformer, 5KVA, Primary voltage 380-400-415 V, Secondary Voltage – 230 V Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select % 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information
Basic Detail
Tender No T26/EGD/2025-26
Bidding Type Tender
Location
City pipri
State Uttar Pradesh
Key Dates
Publish Date 21 Nov 2025
Submission Date 11 Dec 2025
Open Date 12 Dec 2025
Finance
Tender Value Ref. Documents
Tender Fee 2065
EMD 33000
Exemption Available
Document List
Tendernotice_1.pdf
Tendernotice_2.pdf
BOQ_2007253.xls
f467e383-f83e-4f95-8e82-c37899098cd9.html
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 21, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 11, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Dec 12, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

xls

BOQ_2007253.xls

html

f467e383-f83e-4f95-8e82-c37899098cd9.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders