|
| 1 | Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty 1100 Volts grade with stranded aluminium conductor of size 35Sqmm 3.5 Core complete all as specified and directed. |
| 2 | Excavation in trenches n.exc 1.5M wide and n.exc 1.5m in depth for taking out U/G cable, foundation of pole/stay as insoft/loose soft complete all as specified and directed. |
| 3 | Returning filling in soft/loose soil including spreading, leveling, watering and well ramming in layers n.exc 25cm complete all as specified and directed. |
| 4 | Removing excavated material n.exc 50m and depositingwhere directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 5 | M&L Sand cushioning 8cm below and 15cm above the U/Gcable for protection of cable with approved sand complete all as specified and directed. Note: Punned thickness of 18cm will be considered for payment |
| 6 | Supply & laying sub class, ‘B’ bricks in layers perpendicular to the axis of U/G cable for protection of cable complete all as specified and directed. |
| 7 | M&L for laying 40 mm bore GI pipe, light grade with all fittings, in crossing road/path and in pole up to junction box including necessary clamping etc.complete all as specified and directed. |
| 8 | Material and labour for cutting the existing bituminuous road /cement concrete surface of 150 mm thick to thewidth not exceeding 0.50 metre for laying of GI pipe lines and making good the disturbed area with PCC 1:2:4 Type B-1 using 20 mm graded aggregate including necessary form work complete all as specified and as directed. |
| 9 | S & F in repairs Wall mounted Alternating currentplug & socket distribution box(Industrial socket)3 pole, neutral and earth, IP 44 protection of metal body three phase 415 Volts, 50 Hz with provision for one 63 Amps MCB TPN including MCB TPN 63A necessary fixing arrangementscomplete all as specified and directed. |
| 10 | S & F in repairs SP & N Sheet Metal Enclosure with 2 Pole and Earth Metal Plug & Socket for incorporating SPN MCB complete including One MCB, DP, 20 Amps, 240 Volts complete all as specified and as directed. |
| 11 | M&L for supply, fabrication, installation, connection, commissioning and testing of Outdoor type LT panel(CPRI Approved) made out of 3.15 mm thick sheet metalfloor mounted 3 ph 4 wire, 415V properly insulatedaluminium bus bar 300 Amps 04 Nos dust and vermin proof front open with locking arrangementincluding suitable ISMC 75 as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and FRLS copper conductor complete mounted on PCC pillars foundation, cable connection using new lugs complete with danger notice all as specified comprising of Digital voltmeter, ammeter suitable ratio CT’s phase indicator selectorswitch danger board plate completely painted withtwo coats of synthetic enameled paint over a coat of red oxide primer, fixing in position by provision of plate form suitable size with brick work including addition / alternation required for fixing and connections of coming/outgoing cables & including glands, lugs & thimblessuitable for fixing incoming and outgoing complete all as specified and as directed. |
| 12 | a) LED/Neon indicator bulb in RYB Colour. b) Digital Voltmeter 0-500 volts, and Digital Ammeter 0-500 Amps of suitable size - 01 Set c) 3 phase over current and Earth fault relay range with RS 485-01 No Incoming:-d) MCCB 4 Pole, 415 V, Microprocessor release type, 160 A with breaking capacity 36 KA - 01 NosOutgoing:- e)MCCB 4 Pole, 415 V, Thermal Magnetic release type, 40 A with breaking capacity 25 KA - 02 Nos f) MCCB 4 Pole, 415 V, Thermal Magnetic release type, 40 A with breaking capacity 25 KA - 05 Nosg) MCCB 4 Pole, 415 V, Thermal Magnetic release type, 32 A with breaking capacity 25 KA - 01 Nosh) MCB 4 Pole, 415 V, 20 A, C curve with breaking capacity 25 KA - 02 Nos j) MCB 2 Pole, 415 V, 40 A, C curve with breaking capacity 16 KA - 01 Nos |
| 13 | M&L for supply, fabrication, installation, connection, commissioning and testing of Outdoor type feeder piller box (CPRI Approved) made out of 3.15 mm thick sheet metalfloor mounted 3 ph 4 wire, 415V properly insulatedaluminium bus bar 200 Amps 04 Nos dust and vermin proof front open with locking arrangementincluding suitable ISMC 75 as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and FRLS copper conductor complete mounted on PCC pillars foundation, cable connection using new lugs complete with danger notice all as specified comprising of Digital voltmeter, ammeter suitable ratio CT’s phase indicator selectorswitch danger board plate completely painted withtwo coats of synthetic enameled paint over a coat of red oxide primer, fixing in position by provision of plate form suitable size with brick work including addition / alternation required for fixing and connections of coming/outgoing cables & including glands, lugs & thimblessuitable for fixing incoming and outgoing complete all as specified and as directed. |
| 14 | a) LED/Neon indicator bulb in RYB Colour. b) Digital Voltmeter 0-500 volts, and Digital Ammeter 0-500 Amps of suitable size - 01 Set Incoming:-c)MCCB 4 Pole, 415 V, Thermal Magnetic release type, 40 A with breaking capacity 25 KA - 01 NosOutgoing:- d) MCB 4 Pole, 415 V, 20 A, C curve with breaking capacity 25 KA - 03 Nos e) MCB 2 Pole, 415 V, 40 A, C curve with breaking capacity 16 KA - 01 Nos |
| 15 | M & L for floor mounted enclosure made of 3.15 mm thick CRCA sheet along with RAL coated painting, with provision of 02 Nos of compartments for industrial plug socket enclosure one for 3phase socket and another for single phase plug socket, with hinged door with locking arrangement complete including proper stand arrangement for mounting of the enclosure complete all as specified and as directed. |
| 16 | M & L for floor mounted enclosure made of 3.15 mm thick CRCA sheet along with RAL coated painting, with provision of 01 Nos of compartments for incoming supply meter, with hinged door with locking arrangement with provision of transparent glass arrangement for meter reading complete including proper stand arrangement for mounting of the enclosure all as specified and as directed by Engr in Charge. |
| 17 | M&L for supply, fabrication, installation, connection, commissioning and testing of Outdoor type feeder piller box (CPRI Approved) made out of 3.15 mm thick sheet metalfloor mounted 3 ph 4 wire, 415V properly insulatedaluminium bus bar 200 Amps 04 Nos dust and vermin proof front open with locking arrangementincluding suitable ISMC 75 as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and FRLS copper conductor complete mounted on PCC pillars foundation, cable connection using new lugs complete with danger notice all as specified comprising of Digital voltmeter, ammeter suitable ratio CT’s phase indicator selectorswitch danger board plate completely painted withtwo coats of synthetic enameled paint over a coat of red oxide primer, fixing in position by provision of plate form suitable size with brick work including addition / alternation required for fixing and connections of coming/outgoing cables & including glands, lugs & thimblessuitable for fixing incoming and outgoing all as specified and directed by Engineer-in-Charge.(Motor Panel) |
| 18 | Incoming:-a)MCCB 4 Pole, 415 V, Thermal Magnetic release type, 40 A with breaking capacity 25 KA - 01 NosOutgoing:- b) MCCB 4 Pole, 415 V, Thermal Magnetic release type, 20 A with breaking capacity 25 KA - 02 Nosc) MCB 2 Pole, 415 V, 40 A, C curve with breaking capacity 16 KA - 02 Nosd) DOL starter for single phase sumbersible motor of 1HP - 2 Nos |
| 19 | Dismantling of High Mast light completely from base of PCCtightened with nut & bolt with crane arrangement and complete cleaning & servicing of shaft inside, replacement of old nuts & bolts with new, reinstallation of the high mast on PCC base after necessary repairs & replacement of light fittings all as specified and as directed. Note:Quoted rate includes all the necessary arrangements for dismantling & reinstallation. |
| 20 | Supply and fix iron rope 6 mm dia 7/19 construction size and length inclding old unserviceable rope complete all as specified and directed by Engr-in-charge. |
| 21 | Dismantling of high mast rope motor from pully and replace old and burnt copper winding and replace on the same position with necessary greasing including testing complete all as specified and directed by Engr-in-charge. |
| 22 | Servicing of High Mast Gear system for Tool motor, double drum winch with toping up gear oil, pulley assembly, replacement of oil seal, link chain, necessary greasing to gear system & chain link complete all as directed. |
| 23 | Supply and fix 5 corePVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volts, incuding removing old wires all as directed. |
| 24 | Painting of Highmast ring with choke box and other pipings with two coat of enamel paint complete all as specified and directed. |
| 25 | Supply and fixing LED flood light 400 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp with high power LEDs as light source complete including taking down old unserviceable light fittings from high mast ring & replacing with new nuts & bolts all as specified and directed. [Note : Quoted rate includes warranty as per particular specification marking of CA number and name of the firm on the fitting with permanent marker] |
| 26 | M&L Earthing complete with GI plate electrode 600×600× 6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected with GI strip of 32x6mm size by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing with DBs including earthwork and excavation in any type of soil, PCC 1:3:6 type C1 chamber, cover slab with angular iron for holding, 20mm dia GI medium grade pipe for watering, and water funnel with wire mesh, 40mm dia light grade GI pipe for protection of strip and testing on completion complete all as specfied and as directed. |
| 27 | Taking down carefully point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc can be measured separately) removing the material from wall/ceiling etc, making good the disturbed surfaces and taken as credit complete all as specified and as directed. |
| 28 | M & L for Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn through existing PVC Conduit concealed in Walls / Roofs / Floors / Ceiling etc. and Modular Type Pressed Metal Flush Box made out of 1mm thick GI Sheet of suitable size and including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point / Bell Point controlled by One Switch complete all as specified and as directed. |
| 29 | S&F Ceiling rose 3 phase PVC/Polycarbonate isolated body size35x50 mm all as specified and as directed by Engineer-in-Charge. |
| 30 | S&FSwitch modular type single pole one way ,5 Amp 240 Volts all as specified and as directed by Engineer-in-Charge. |
| 31 | M & L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 2.5 sqmm including one run of 2.5 sqmmsingle core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capings incl accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly for contionous connection from DB box to building security lights all as specified and directed. |
| 32 | M & L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 4 sqmm including one run of 4.0 sqmmsingle core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capings incl accessories fixed on wall/ceiling etc., connecting to common earth dolly forall as specified and directed. |
| 33 | S & F MCB, SP, 6 to 20 Amps, 10 KA, AC, 230 Volts, 50 Hz, B Curve complete including taking down unserviceable isolator all as specified and as directed. |
| 34 | S & F MCB SPN 240 volts, 6 to 32 amps, C series, breaking capacity 10kA complete all as specified and directed. |
| 35 | S & F DB for MCB SPN 8 way Double door type fixed inside the wall complete all as specified and directed. |
| 36 | S & F DB for MCB SPN 4 way Double door type fixed inside the wall complete all as specified and directed. |
| 37 | Supply and fixing Post top lantern for 360 degree indirectlight with IP- 65 protection 40WAC Supply single phase energy saving, environmental friendly, long life aesthetically designed with resistant to impact and corrosion, Glare free and better uniformity and symetrical lightdistruction spun aluminium landscape luminaire with high power LEDs as light source complete all as specified and directed. [Note : Quoted rate includes warranty as per particular specification marking of CA number and name of the firm on the fitting with permanent marker] |
| 38 | S & F Square recessed mounted LED light (2\"x2\") of minimum 3200 to 3600 Lumens warm/cool day light with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge. [Note : Quoted rate includes warranty as per particular specification marking of CA number and name of the firm on the fitting with permanent marker] Make:Philips SM367 LED36S-6500 G6 L54W54 PSU OD or its equivalent in crompton/ Bajaj/ Havells |
| 39 | S & F Square recessed mounted LED light (4\"x1\") of minimum 3200 to 3600 Lumens warm/cool day light with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge. [Note : Quoted rate includes warranty as per particular specification marking of CA number and name of the firm on the fitting with permanent marker] Make : Philips SM270C LED 30S 6500 PSU WH orits equivalent in crompton/ Bajaj/ Havells |
| 40 | S & F wall mounted bulk head LED lightof minimum 1000 Lumens warm/cool day lightwith all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge. [Note : Quoted rate includes warranty as per particular specification marking of CA number and name of the firm on the fitting with permanent marker] Make: Philips Meraki round 10W its equivalent in crompton/ Bajaj/ Havells. |
| 41 | S & F in repairdecorative wallmounted LED mirror light of minimum 900 to 1000 Lumens with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge [Note : Quoted rate includes warranty as per particular specification marking of CA number and name of the firm on the fitting with permanent marker]Make: Philips WT202W LED10S CW PSU S3 PCits equivalent in crompton/ Bajaj/ Havells. |
| 42 | S&F 30 Watt LED Street light fitting having minimum 110 luminus/Watt efficiency with IP 65 and 4 KV inbuilt surge protection, complete with pressure die cast housing with epoxy power coated dark graphite grey colour finish. Prismatic polycarbonate cover with individual LED lenses, lumanire. 2 core 1.5 Sq mm copper conductor shall use to connect LED light to existing ceiling rose/junction box through GI bracket and flexible PVC pipe with all accessories complete all as specified and directed by the Engineer in charge. [Note :- GI Bracket shall be paid seperatley.)[Note : Quoted rate includes warranty as per particular specification marking of CA number and name of the firm on the fitting with permanent marker] |
| 43 | S&F GI pipe 40 mm bore , medium grade, duly bend to shape 1.2 m long mounting bracket, fixing clamps bolts, nuts of suitable size etc complete (Replacement of U/S brackets only ) all as specified and as directed by Engineer-in-Charge. |
| 44 | Dismantling and taking down fluorescent tube Building security light fittings & post top lamp for replacement with LED Fittings [Note : LED Fittings paid seperately corresponding item] all as specified and as directed by Engineer-in-Charge. |
| 45 | S&F Cable Junction of size93 x 93 x 62 Boxes IP 66/69“halogen free and weather proof” for 2.5 sq.mm cable for outdoor installation ( with same company metric knockouts for cable entry and terminal) complete all as specified and directed. Make : Hensel Model : KF 0200 U |
| 46 | M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with GI earth wire 4 mm diaby means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber, cover slab with angular iron for holding,20mm dia GI medium grade pipe for watering , and water funnel with wire mesh, 40mm dia light grade GI pipe for protection of strip and testing on completion complete all as specified and as directed. |
