|
| 1 | Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work,jumper work,blasting in soft and hard rock and chiselling work including saturated soil slushy soil and under floor upto all depth and stacking the excavated soil not more than 3 metre clear from the edge of excavation and then returning the stacked soil in 15 centimetre (Fifteen centimetre)layer when required into plinth sides of foundation etc.consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge within all leads and lifts. |
| 2 | Providing and laying cement concrete 1:3:6 (One cement is to three sand is to six graded stone aggregate 40 milimetre nominal size) and curing complete excluding the cost of form work in foundation and plinth with in all leads and lifts as per the direction of Engineer-in-charge. |
| 3 | Providing form work with steel plates 3.15 milimetre thick welded with angle iron in frame 30*30*5 milimetre so as to give a fair finish including centring,shuttering, strutting and propping etc. with wooden battens ballies,height of propping and centring below supporting floor two ceiling not exceeding 4 metre and removal of the same for in-situ-reinforced concrete and plain concrete work in- Foundation,footings bases of column and the like mass concrete within all leads and lifts as per the direction of Engineer-in-charge. |
| 4 | In flat surfaces with steel plates such as soffits of suspended floors, roofs, landing and the like floor etc upto all thickness in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. |
| 5 | Columns,pillars,posts and struts: column and the like mass concrete within all leads and lifts as per the direction of Engineer-in-charge. |
| 6 | Sides and soffits of beams, beam hunchings, cantilivers girders, bressumers and lintels not exceeding 1 metre in depth within all leads and lifts complete in all respect as per the entire direction of Engineer-in-charge. |
| 7 | Edge of slab & breaks in floor and wall upto 20cm within all leads and lifts as per the direction of Engineer-in-charge. |
| 8 | Providing and laying cement concrete 1:1.5:3(One cement is to one and half sand is to three graded stone aggregate 20 milimetre nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- Foundation,footings bases of column and the like mass concrete within all leads and lifts as per the direction of Engineer-in-charge. |
| 9 | Suspended floors,roofs landing shelves and their supports balconies beams,girders and cantilevers upto floor two level within all leads and lifts as per the direction of Engineer-in-charge. |
| 10 | Columns,pillars,posts and struts: column and the like mass concrete within all leads and lifts as per the direction of Engineer-in-charge. |
| 11 | supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing with in all leads and lifts as per the direction of Engineer-in-charge. |
| 12 | Stone filling behind the retaining walls within all leads and lifts direction by the Engineer-in-charge. |
| 13 | Providing and laying mild steel/ tor steel reinforcement for reinforced cement concrete work including bending binding and placing in position complete upto floor two level within all leads and lifts as per the direction of Engineer-in-charge. |
| 14 | 2nd. Class Brick work using common burnt clay building brick in super structure above plinth level upto floor two level in cement mortar 1:6 (one cement : six sand) with in all leads and lifts as per the direction of Engineer-in-charge. |
| 15 | Half brick masonry work using common burnt clay building brick in superstructure above plinth level upto floor two level in cement mortar 1:3 (One cement is to three sand) second class with in all leads and lifts as per the direction of Engineer-in-charge. |
| 16 | Providing wood work in frames and doors,windows,clearstory windows and other frames wrought framed and fixed in position 2nd. class (sal wood) within all leads and lifts as per the direction of Engineer-in-charge. |
| 17 | Providing and fixing 40 x 3 milimetre flat iron hold fast 40 centimetre long including fixing to frame with 10mm diametre bolts nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 (one cement : three sand : six graded stone aggregate 20mm nominal size complete in all respect for door and window with in all leads and lifts as per the direction of Engineer-in-charge. |
| 18 | 6 milimetre (Six milimetre) thick cement plaster to ceiling in cement mortar 1:3 (One cement is to three sand) within all leads and lifts as per the direction of Engineer-in-charge.. |
| 19 | 15mm cement plasper in single coat on fair side of brick masonery for interior plastering upto floor two level including arrises , internal rounded angle , chamfers and /or orunded angle not exceeding 80mm in girth and finished even and smooth in CM 1:6 (1cement: 6 approved sand) |
| 20 | 20 milimetre(Twenty milimetre) thick cement plaster in single coat on rough side of brick/stone masonry for interior plastering upto floor two level including arrises internal rounded angles chamfers and/or rounded angles not exceeding 80 milimetre in girth and finished even and smooth in cement mortar 1:6 (One cement is to six sand) within all leads and lifts as per the direction of Engineer-in-charge. |
| 21 | Providing and laying Duro stone vetrified tiles (300x300x10mm) in grey/coloured of required shade in flooring, treads of step and landing laid on a bed 12mm thick cement mortar 1:3 (1cement:3approved sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. |
| 22 | Providing and laying Duro stone vetrified tiles (300x300x8mm) in grey/coloured of required shade in skirting of riser of step Dedo. etc laid on12mm thick cement mortar 1:3 (1cement:3approved sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. |
| 23 | Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick within all leads and lifts as per the direction of Engineer-in-charge. |
| 24 | Providing and fixing 40 milimetre thick panelled, glazed or pannelled and glazed shutters for doors, window and clearstory window including bright finished/black enamelled iron but hinges with necessary screws in 2nd class deodar wood with in all leads and lifts as per the direction of Engineer in charge. |
| 25 | Providing and fixing wire gauge shutters using galvanised mild steel wire gauge of is gauge designation 85 gauge wire of dia 0.56 milimetre for doors, windows and clerestorey windows including bright finished black enamelled iron hinges with necessary scews 40 milimetre thick of 2nd. class deodar wood within all leads and lifts as per the direction of Engineer-in-charge. |
| 26 | Providing and fixing mild steel grills of required pattern in wooden frames of windows etc. mild steel flats square or rounded bars with required bolts and nuts or by screws plain grill within all leads and lifts as per the direction of Engineer-in-charge. (Plain grill). |
| 27 | Providing and fixing anodized aluminium fitting with nuts and screwed complete with in all leads and lifts as per direction of Engineer in charge. Sliding door bolts 250x16 milimetre. |
| 28 | M.S Tower bolts (Barrel type) 150x10 milimetre. |
| 29 | M.S Tower bolts (Barrel type) 100x10 milimetre. |
| 30 | Providing and fixing anodized aluminium handle anodised transparent or died to required shad with necessary screw complete with in all leads and lifts as per direction of Engineer in charge. Handles 125 milimetre. |
| 31 | Handles 75 milimetre. |
| 32 | Providing and fixing bright finished hard drawn hooks and eyes complete with in all leads and lifts as per direction of Engineer in charge. a) 150 milimetre. |
| 33 | Providing and fixing bright finished or & black enamelled iron Helical door spring 150mm complete with in all leads and lifts as per direction of Engineer in charge. |
| 34 | Distempering( two coats) with oil bond washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give and even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer. |
| 35 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete.complete with in all leads and lifts as per the direction of Engineer-in-charge. |
| 36 | Applying two coats of wood preservative on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease dirt and other foreign matter, sand papering and knotting within all leads and lifts as per the direction of Engineer-in-charge. |
| 37 | Applying priming coat over new wood and wood based surfaces after and including preparing then surface by thoroughly cleaning oil grease,dirt and other foreign matter,sand papering and knotting with ready mixed paint brushing wood primer pink with in all leads and lifts as per the direction of Engineer-in charge. |
| 38 | Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of all dirt dust and other foreign matter sand papering and stopping with enamel paint other than white with in all leads and lifts as per the direction of Enginer in charge |
| 39 | Applying priming coat over new steel and other metal surfaces after and including preparing then surface by thoroughly cleaning oil grease,dirt and other foreign matter,sand papering and knotting with ready mixed paint brushing with in all leads and lifts as per the direction of Engineer-in charge. |
| 40 | Painting two coats excluding priming coat on new steel and other metal surfaces with ready mixed paint and brushing to give an even shade including cleaning of all dirt,dust and other foreign matter with in all leads and lifts complete in all respect. |
| 41 | Providing plinth protection 50 milimetre thick in cement concrete 1:3:6(One cement is to three sand is to six graded stone aggregate 20 milimetre nominal size)including finishing the top surface of concrete smooth within all leads and lifts as per the direction of Engineer-in-charge. |
| 42 | Providing plinth protection 75 milimetre thick (unconsolidated ) bed dry brick/ stone aggregate 40 milimetre nominal size) wil rammed and sonsolidated and grouted with fine sand including preparation of ground within all leads and lifts as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
