|
| 1 | Operation of Pumps where underground water used utilizing Pump as per scope of work |
| 2 | Operation of Valve & Maintaining Pipe line, Valve Chamber,Tank Premises etc. |
| 3 | Cleaning and disinfecting above 2000 litre Water Tank including masonry reservoir. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.2.8.1All kinds of soil |
| 5 | Supply of15mm PTMT bib cock |
| 6 | Supply of15 mmdia PTMT stop cock (male thread) |
| 7 | Supply of push cock of heavy quality and of approved make and brand. Cast iron15 mm |
| 8 | Supplying push cock of heavy quality and of approved make and brand. Cast iron20 mm |
| 9 | Supply of PTMT push cock 15 mm dia |
| 10 | Supply of PTMT Push cock 12mm dia 20 mm BSP |
| 11 | Supply of C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all cast iron components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT per sq. cm. Spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to I.S. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction80 mm |
| 12 | Supply of C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all cast iron components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT per sq. cm. Spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to I.S. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction 100 mm |
| 13 | Supply of C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all cast iron components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT per sq. cm. Spindle nut valve and seat faces of hard wear resisting,manufactured from best quality gunmetal conforming to I.S. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulicpressure) per sq. cm., valve opening to anticlockwise direction 150 mm |
| 14 | Supply of C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all cast iron components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT per sq. cm. Spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to I.S. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction 200 mm |
| 15 | Supply of20 mm diagun metal gate valve with C.I wheel |
| 16 | Supply of Brass full way valve with C.I Wheel (screwed end) 25 mm dia |
| 17 | Supply of Brass full way valve with C.I Wheel (screwed end) 40 mm dia |
| 18 | Supply of Brass full way valve with C.I Wheel (screwed end) 50 mm dia |
| 19 | Supply of Semi rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 20 | Supply of Cast Brass pillar taps |
| 21 | Supply of G. I. pipes of TATA make including necessary sockets 15 mm dia Medium quality |
| 22 | Supply of G. I. pipes of TATA make including necessary sockets 20 mm dia Medium quality |
| 23 | Supply of G. I. pipes of TATA make including necessary sockets 25 mm dia Medium quality |
| 24 | Supply of galvanised iron socket with I.S.I. mark 15 mm dia. |
| 25 | Supply of galvanised iron socket with I.S.I. mark 20 mm dia. |
| 26 | Supply of galvanised iron socket with I.S.I. mark 25 mm dia. |
| 27 | Supply of G.I. plug15 mm dia |
| 28 | Supply of G.I. plain equal elbow of approved brand and make of 15 mm dia |
| 29 | Supply of G.I. reducing tee of approved brand and makeof 20 mm x 15 mm |
| 30 | Supply of G.I. reducing tee of approved brand and makeof 25 mm x 15 mm |
| 31 | Supply of G.I. reducing tee of approved brand and makeof 25 mm x 20 mm |
| 32 | Supply of G.I. nipple standard 50 mm long of 15 mm |
| 33 | Supply of G.I. nipple standard 50 mm long of 20 mm |
| 34 | Supply of G.I. nipple standard 50 mm long of 25 mm |
| 35 | Supply of G.I. nipple standard 75 mm long of 15 mm dia |
| 36 | Supply of G.I. nipple standard 100 mm long of 15 mm dia |
| 37 | Supply of G.I. nipple standard 100 mm long of 20 mm dia |
| 38 | Supply of G.I. nipple standard 100 mm long of 25 mm dia |
| 39 | Supply of G.I. nipple standard 150 mm long of 15 mm dia |
| 40 | Supply of G.I Union of 15 mm nominal bore |
| 41 | Supply of G.I Union of 20 mm nominal bore |
| 42 | Supply of G.I Union of 25 mm nominal bore |
| 43 | Supply of G.I. reducing elbow of 20 mm x 15 mm |
| 44 | Supplying pig lead at site of work. |
| 45 | Suply of Grease |
| 46 | Supply of Rubber sheet |
| 47 | Supply of Jute gasket |
| 48 | Supply of G.I plain flange of approved quality of 50 mm dia |
| 49 | Supply of G.I plain flange of approved quality of 75 mm dia |
| 50 | Supply of G.I plain flange of approved quality of 100 mm dia |
| 51 | Supply of G.I plain flange of approved quality of 150 mm dia |
| 52 | Supply of G.I threaded flange of approved quality of 50 mm dia |
| 53 | Supply of G.I threaded flange of approved quality of 75 mm dia |
| 54 | Supply of G.I threaded flange of approved quality of 100 mm dia |
| 55 | Supply of G.I threaded flange of approved quality of 150 mm dia |
| 56 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work, 20 mm nominal dia Pipes |
| 57 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work, 25 mm nominal dia Pipes |
| 58 | Supplying P.V.C. water storage tank of approved quality with closed topwith lid (Black) - Multilayer500 litre capacity |
| 59 | Supplying P.V.C. water storage tank of approved quality with closed topwith lid (Black) - Multilayer1000 litre capacity |
| 60 | Supply of CPVC elbow of approved quality 20 mm |
| 61 | Supply of CPVC elbow Brass fitted of approved quality, 20 mm |
| 62 | Supply of CPVC Plain Tee of approved quality, 20 mm |
| 63 | Supply of CPVC Plain Socket of approved quality, 20 mm |
| 64 | Supply of CPVC Plain MTA of approved quality, 20mm x 20mm |
| 65 | Supply of CPVC Brass FTA of approved quality, 20mm x 20mm |
| 66 | Supply of teflon |
| 67 | Supply of 25 mm upvc socket |
| 68 | Supply of 25 mmupvc Elbow |
| 69 | Supply of 25 mmupvc tee |
| 70 | Supply of 25 mm Tank Nipple |
| 71 | Supply of 25 mm upvc union |
| 72 | Supply of 25 mm upvc pipes |
| 73 | Supply of 20mm upvc pipes |
| 74 | Supply of 20 mmupvc socket |
| 75 | Supply of 20 mm upvc tee |
| 76 | Supply of 20 mm upvc tank nipple |
| 77 | Supply of 20 mm upvc tank clam |
| 78 | Supply of 20 mm upvc union |
| 79 | Supply of 20 mm x 15 mm Brass elbow |
| 80 | Supply of urinal pipes |
| 81 | Supply of holdtite |
| 82 | Supply of 1.5 HP, Single Phase/230 V/50 Hz starters control panel for submersible Pump: Kirloskar or equivalent |
| 83 | Repairing chocked up tubewell by cleaning and washing with chemical including pumping with powerful pumpAbove 50 mm to 100 mm dia. tube well upto 100 metre deep |
| 84 | Taking out pipes of existing tube well including straineretc.complete for portion of length b) Beyond 20 metre below G.L iii) 80 mm dia. |
| 85 | Supply of centrifugal monoblock pump, 1 horsepower(1 hp, 50 hz,220 V, single phase, 500 lph capacity): Crompton or equivalent |
| 86 | Supply of PTMT Ball cock of 15 mm complete with epoxy coated Aluminium rod & hd Ball |
| 87 | Supply of PTMT Ball cock of 20 mm complete with epoxy coated Aluminium rod & hd Ball |
