|
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified. |
| 2 | Excavation in trenches not exc. 1.5 m wide not exc. 1.5 m in depth; for laying of cables not exc. 10 Sqm on plan and getting out , trimming sides, forming bottom surface to required level complete in hard/dense soil all as specified and as directed. |
| 3 | Excavating over areas, n exc 1.5 m deep and getting out soft/ loose soil complete all as specified. |
| 4 | Excavation in post holes (for similar holes) each not exceeding 0.5 CUM getting out soft/ loose soil, returning filling, in and ramming earth or broken mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance not exceeding 50 m and making good surface in soft loose soil complete all as specified.Note: Returning filling and Removing of surplus soil are deemed to be included in this item. |
| 5 | Material and labour for Hardcore of broken stone or boulder gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified. |
| 6 | Material and labour for Cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregates as in foundations, filling and mass-concrete complete all as specified. |
| 7 | Material and labour for 75 mm thick Cement (PCC) concrete 1:4:8 type D2 using 40 mm graded stone aggregates as in hardstanding/ sub bases finished the surfaces even and rough complete all as specified. |
| 8 | Material and labour for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade \"A\" complete all as specified. |
| 9 | Material and labour for 40 mm PCC type B1, 1:2:4 using 20 mm graded crushed stone aggregates as in flooring finished the surface evan and fair, completed all as specified. |
| 10 | Material and labour for 38 mm thick glass dividing strips, 3 mm thick complete all as specified. |
| 11 | Material and labour for 60 mm thick machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade including 50 mm thick sand cushioning (after fully compacted) under the paver bolcks complete all as specified. |
| 12 | Supply and fix hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified. |
| 13 | Supply and fix mild steel screw bolts (machine made) of dia 5-10 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm but not exc 15 cm long complete all as specified and directed. |
| 14 | Supply and fix Fe-410-W(GdeE-250) qualityA Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified. |
| 15 | Supply and fix mild steel screw bolts (machine made) of dia 16-20 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.50 cm but not exc 30 cm long complete all as specified and directed. |
| 16 | Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240 complete all as specified. |
| 17 | Supply and fix roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde-E- 250) quality-A complete all as specified. |
| 18 | Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 19 | Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 20 | Material and labour for precast cement concrete block masonry with solid blocks 1:3:6 type C1 using 20 mm graded crushed stone aggregates, exc 10 cm in width and setting in cement mortar 1:6, complete all as specified. |
| 21 | Material and labour for 15 mm thick renderingin cement mortar 1:4 in two layers (10 mm +5 mm) on external faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement with using approved Liquid Water Proofing Compound on second layer (5 mm) as per manufacturer instruction complete all as specified and as directed by Engineer-In-Charge. Note: Liquid Water Proofing Compound shall be measured and paid including this item |
| 22 | Material and labour for 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6 finshed even and smooth without using extra cement complete all as specified. |
| 23 | Material and labour for prepration new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 24 | Material and labour for preparation of newly plastered surfaces of wall and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved manufacturer of required shade and colour complete, as per manufacturer\"s specification. Two or more coats over a coat of wall care putty complete all as directed. |
| 25 | Material and labour for applying two or more coatsof 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces. |
| 26 | Returning filling in soft/loose soil, including, spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed. |
| 27 | Removing excavated materials (soils) not exc 50.00mtr and depositing where directed at a level not exc 1.50 mtr above the starting point in soil, complete all as specified and as directed. |
| 28 | Material and labour for cutting holes in circular shape in brick walls exceeding half brick but not exceeding one brick thick in cement mortar for fixing exhaust fan and making good disturbed surfaces in cement mortar (1:3) or cement concrete 1:2:4 type B0 using 12.50 mm graded crushed stone aggregates finished even and smooth and to match with existing surfaces as required complete all as specfied and as directed. |
| 29 | Supply and fix 4.00 mm thick frosted glass, ordinary quality and glazingin square exceeding 0.50 sqm in each panein aluminium joineryin each pane complete all as specified. |
| 30 | Material and labour for 7 to 8 mm thick joint free premium quality anti skid colourceramic tiles size of each tiles should be 400 mm x 400 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces including 20 mm thick screed bed in cement mortar 1:4 complete all as specified. |
| 31 | Material and labour for 7 mm thickjoint free premium quality glazed ceramic colourtiles of size 450 mm x 350 mm/ 350 mm x 250 mm as in skirting / dado / vertical surfaces set and jointed and pointed in white or colour cement to match existing surfaces including 10 mm thick rendering in cement mortar 1:3 complete all as specified. |
| 32 | Supply and fix white vitreous china counter shank wash basin ,including 32 mm dia chromium plated waste coupling and waste pipe, cutting for and pinning in ends of brackets or erecting stand complete all as per manufacturer instruction including taking out old existing basin including all fixtureres.Make Johnshon Cat No P1614PW0301/ Cera Cat No S2030115/ Parryware Cat No C0431 |
| 33 | Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm,complete all as specified.Make:-Blue Star & Silver Shine/ Prayag Polymer Pvt. Ltd./ Polytuff |
| 34 | Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exceeding 20 cm girth complete all as specified. |
| 35 | Supply and fix for 15 mm bore dia of pipe Brass CP Wall mixer 3 in 1 for mixing hot & cold water screwed down for iron pipe and fixed complete all as per manufacturer instruction.Make:- ParrywareCat No G3317A1/ Jaquar Cat No CQT-23281UPR/ Johnson Cat No T6023C |
| 36 | Supply and fix 15 mm bore quarter turn Bib taps, chromium plated, cast copper alloy, with wall flange concealed type screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.Make JohshonCat No T3305C/ Jaquar Cat No FUS-29037/ Marc Cat No MCT-1030 |
| 37 | Supply and fix15 mm dia cast copper alloy chromium plated Angle valves, with wall flange concealed type screwed down for iron pipe of for unions complete all as specified and directed. Make :- ParrywareCat No T3907A1/ Cera Cat No F1016201/ Johnson Cat No T5310C |
| 38 | Supply and fix 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 12 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified.Make: Jaquar & Company Private Limited. / Cera/ Saint Gobain/ Modiguard/ Prayag Polymer Pvt. Ltd. |
| 39 | Supply and fix one piece Vitreous China wash down water closet pan floor mounted, whiteincludingfixing bolts, 10 ltr capacity flushing cistern,flush pipe plastic water closet seat white including jet spray, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devices and also including \"P\" or \"S\" trap including taking out old pedestal alongwith existing all fittings and making the surface match with existing surface complete all as per manufacturer instruction.Make of Pan Parryware Verve AM / Cera CAMPBELL/ Johnshon COSMO |
| 40 | Supply and fix 10 ltrs capacity PVC valveless syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets and 32 mm dia PVC low or high density flush pipe complete all as per manufacturer instructionMake ParrywareCat No E8109 / Cera Cat NoB1020101/ Johnshon Cat No P2831PW |
| 41 | Supply and fix 75mm dia PVC (SWR) floor trap, plain with gratings including jointing with solvent cement complete all as specified and directed.Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast |
| 42 | Supply and fix PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast |
| 43 | Supply and fix 110mm dia PVC (SWR) pipes single socketed in any length with rubber ringjoints, laid in trenches or in floors complete all as specified and directed.Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ OriplastNote: Quoted rate is deemed to be included for necessary Bend, Junction, branch piece, reducer and any other fittings required for fixing. |
| 44 | Supply and fix 75mm dia PVC (SWR) pipes single socketed in any length with rubber ringjoints, laid in trenches or in floors complete all as specified and directed.Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ OriplastNote: Quoted rate is deemed to be included for necessary Bend, Junction, branch piece, reducer and any other fittings required for fixing. |
| 45 | Material and labour for 75 mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregates complete all as specified. |
| 46 | Supply and fix as in repairs CP health faucet with tube and wall hook including all fittings as per manufacturer instruction.Make: Parryware Cat No T9961A1/ Jaquar Cat No ALD-579 / Johnson Cat No S0826C |
| 47 | Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 48 | Supply and fix anodised aluminium door shutters with powder coating of any colour (Thickness or powder coating not less than 50 micron), aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, 4 lever mortice lock, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 49 | Supply and fix powder coated aluminium window and ventilator shutters powder coating of any colour (Thickness or powder coating not less than 50 micron), side hung/ sliding type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 50 | Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified.Make: Surya Roshni ltd/ Tata/ Jindal Steel/ Prakash/ Bansal/ Zenith/ Nezone Tubes Ltd |
| 51 | Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified.Make: Surya Roshni ltd/ Tata/ Jindal Steel/ Prakash/ Bansal/ Zenith/ Nezone Tubes Ltd |
| 52 | Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified. |
| 53 | Material and labour for reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggreagates as in foundation including rafters footings foundation beam plinth beam bases for column etc basement slab under reamed piles and mass concrete complete all as specified and directed. Note: Reinforcement and form work shall be measured and paid separately. |
| 54 | Material and labour for use & waste of formwork to sides of square, rectangular or polygonal pillars, posts, columns etc for flat rough finished surfaces complete all as specified and directed. |
| 55 | Material and labour Reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregates as in Columns, pillars, piers, posts and struts complete all as specified and directed. Note:-Reinforcement and form work shall be measured and paid separately |
| 56 | Material and labour for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips,complete all as specified and directed. |
| 57 | Material and labour for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers & binders,cut to length, bent to shapes required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 58 | Supply and fix Rotational moulded polyethylene water storage overhead tanks (cylindrical vertical with closed top) multi layered 1000 ltr capacity hoisted and fixed in position including 25 mm dia Ball valves (Minimum weight of valve 455 gms) high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe complete all as specified.Make:Sintex/ Astral/ Finolex/ Supreme |
| 59 | Supply and fix Pavement floor vitrifiedtiles of size 300x 300x 10 mm thk (Endura tiles of Johnson or equivalent makes listed in List of Makes) of approved colour and design set and jointed in neat cement slurry and pointed in white or coloured to match including 20 mm th screed bedin cement mortar 1:4complete all as specified and directed. |
| 60 | Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removal of debries to a distantance exc. 50 mtr but not exc. 250 mtr complete all as directed. |
| 61 | Dismantling timber scantlings 40 sqcm and over in section for unframed work, in any position all as directed. |
| 62 | Supply and fix steel (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. conforming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified. |
