|
| 1 | Surface excavation n exc 30 cm deep & avg 15 cm and getting out in hard / dense soil complete all as directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan areain hard / dense soil and getting out complete all as specified and directed. |
| 3 | M & L for plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 4 | M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 5 | M&L for hard core of broken stone or boulder, gauge n exc 63mm deposited spread and leveled in layers n exc 15cm thick watered and rammed to a true surfacescomplete all as specified and directed. |
| 6 | S&F TMT bars 10mmdia and over, cut tolength, bent to shaperequired, includingcranking, bendingspirallyfor hoopingfor columns, hookingends and bindingwith and includingmild steel wire(annealed) not lessthan 0.9mm dia orsecuring with clips complete all as specified and directed. |
| 7 | S&F TMT bars 5 mm to 10mmdia as in stirrups / spacers / binders, cut tolength, bent to shaperequired, includingcranking, bendingspirallyfor hoopingfor columns, hookingends and bindingwith and includingmild steel wire(annealed) not lessthan 0.9mm dia orsecuring with clips complete all as specified and directed. |
| 8 | M&L forRCC M-30 (Design Mix) (20mm graded aggregates) as in foundation, footing, mass concrete, foundation beam, plinth beam and base for column complete all as specified and directed. |
| 9 | M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as inColumns,pillars, piers,posts and struts complete all as specified and directed. |
| 10 | M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and directed. |
| 11 | M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in slab supported on wall ,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 12 | Use & waste for flat formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits if any of foundations and plinth beams and similar work, etc, rough finished surfaces of concrete etc all as specified and directed |
| 13 | Use & waste for flatform work to sides of pillars, posts struts, piers columns and stanchions, square, rectangular or polygonal rough finished surfaces of concrete etc all as specified and directed |
| 14 | Use & waste for flat formwork to sides of concrete beams, cantilevers,bressummers, lintels over 1.5m span and similar work, etc, rough finished surfaces of concrete etc all as specified and directed |
| 15 | Use & waste for flat formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat surface, rough finished surfaces of concrete etc all as specified and directed |
| 16 | Returning, filling in incl spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified & directed. |
| 17 | Removing excavated material to a distance n exc 50 mtr and depositing where directed at a level n exc 1.50 mtr above the starting point complete all as specified & directed. |
| 18 | M & L for full or more brick thick Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified and directed. |
| 19 | M & L for half brickthick Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 using old size brick complete all as specified and directed. |
| 20 | M & L forrendering 10 mm thick cement plastering on wall surfaces in cement mortar 1:6 onother than fair face of brick-work or concrete surfaceandfinishing the surface even and fair without using extra cement complete all as specified and directed. |
| 21 | M & L for rendering 15 mm thick cement plastering on wall surfaces in two layers (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4,mixed with liquid water proofing compoundin top layer as per manufacturer\"s instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 22 | M&L for rendering 5 mm thick cement plastering on ceiling surfaces in cement mortar 1:3 on concretesurface, finished the surface even and fair without using extra cement complete all as specified and directed. |
| 23 | Supply onlyliquid water proofing compound complete all as specified and directed. |
| 24 | M&L for preparing new plasteredsurfaces of walls and applying Two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 m/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including one priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as ecommended by the manufacturerall as specified and as directed (Note :Rate shall be included for necessary scaffolding and safety measures where required at site ). |
| 25 | M&L for preparation of new platered surface of wall and applying two coats of oil bound distemperover a coat ofprimer over wall care putty not exceeding 2 mm thick complete all as specified and as directed. |
| 26 | M&L for preparation of new platered surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 27 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 28 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 29 | S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 30 | S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sectionsor cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed. |
| 31 | S&F 100mm butt hinges medium weight, cold rolled with galvanised mild steel hinge pincomplete all as specified and directed. |
| 32 | S&F 150 mm long Extruded Aluminium alloy handles, cast type, anodised complete all as specified and directed. |
| 33 | S&F UPVC ventilator with framework made out of multichamber hollow PVC section DWUF 405 (40x46mm) of sintex or equivalent section of other make as per make list. 3mm thick pin headed glass shall be fixed with frame in the lower section using extruded PVC section having a dimension of 9mm x 14.5mm (GL-19 PVC section of Sintex or equivalent section of other make as per make list ) with EPDM gasket (SPL-003 of sintex or equivalent section of other make as per make list) for both the PVC sections. Mullion of ventilator shall be made up of multichamber hollow PVC section DWUF 406 (63.5x40mm) of sintex or equivalent section of other make as per make list, shall be fixed with EPDM gasket. GL-19 or equivalent section shall be fixed to the three side ofDWUF 405 or equivalent and one side of DWUF 406 or equivalent above the centre mulion. Glass panel of aluminium lower set to be fixed to the frame DWUF 405 or equivalent on the top of the ventilator to the glass. DWUF 405 or equivalent and DWUF 406or equivalent corners shall be mitred cut, joineted and welded with 12mm square guard bar complete all as specified and directed. |
| 34 | S & F 4.8 mm thick, sheet glass,ordinary quality and glazing with oil puttyin square n.exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 35 | S&F 20 mm CPVC pipes SDR 11 shall be fixed with requisite special type of fittings onwalls(conceled) & ceiling or laid in floors for internal water supply complete all as specified and directed.(Note: Necessary special fittings shall be measured and paid under relevant supply only items.) |
| 36 | S&F 25 mm CPVC pipes SDR 11 shall be fixed with requisite special type of fittings onwalls(conceled) & ceiling or laid in floors for internal water supply complete all as specified and directed.(Note: Necessary special fittings shall be measured and paid under relevant supply only items.) |
| 37 | S&F 32 mm CPVC pipes SDR 11 shall be fixed with requisite special type of fittings onwalls(conceled) & ceiling or laid in floors for internal water supply complete all as specified and directed.(Note: Necessary special fittings shall be measured and paid under relevant supply only items.) |
| 38 | S&F 40 mm CPVC pipes SDR 11 shall be fixed with requisite special type of fittings onwalls(conceled) & ceiling or laid in floors for internal water supply complete all as specified and directed.(Note: Necessary special fittings shall be measured and paid under relevant supply only items.) |
| 39 | Supply only 20mm brass elbow for jointing CPVC pipe all as specified and directed. |
| 40 | Supply only 20mm brass elbow (3/4 X ½) for jointing CPVC pipe all as specified and directed. |
| 41 | Supply only 20mm brass Tee for jointing CPVC pipe all as specified and directed. |
| 42 | Supply only 20mmmale brass threaded adaptor (MTA/ MBTA)for jointing CPVC pipe all as specified and directed. |
| 43 | Supply only 20mmfemale brass threaded adaptor (FTA/ FBTA)for jointing CPVC pipe all as specified and directed. |
| 44 | Supply only 20mm Union for jointing CPVC pipe all as specified and directed. |
| 45 | Supply only 20mm tank adopter for jointing CPVC pipe all as specified and directed. |
| 46 | Supply only 25mm brass elbow for jointing CPVC pipe all as specified and directed. |
| 47 | Supply only 25mm brass elbow (3/4 X ½) for jointing CPVC pipe all as specified and directed. |
| 48 | Supply only 25mm brass Tee for jointing CPVC pipe all as specified and directed. |
| 49 | Supply only 25mmmale brass threaded adaptor (MTA/ MBTA)for jointing CPVC pipe all as specified and directed. |
| 50 | Supply only 25mmfemale brass threaded adaptor (FTA/ FBTA)for jointing CPVC pipe all as specified and directed. |
| 51 | Supply only 25mm Union for jointing CPVC pipe all as specified and directed. |
| 52 | Supply only 25mmtank adopter for jointing CPVC pipe all as specified and directed. |
| 53 | Supply only 32mm brass elbow for jointing CPVC pipe all as specified and directed. |
| 54 | Supply only 32mm brass elbow (3/4 X ½) for jointing CPVC pipe all as specified and directed. |
| 55 | Supply only 32mm brass Tee for jointing CPVC pipe all as specified and directed. |
| 56 | Supply only 32mmmale brass threaded adaptor (MTA/ MBTA)for jointing CPVC pipe all as specified and directed. |
| 57 | Supply only 32mmfemale brass threaded adaptor (FTA/ FBTA)for jointing CPVC pipe all as specified and directed. |
| 58 | Supply only 32mm Union for jointing CPVC pipe all as specified and directed. |
| 59 | Supply only 32mmtank adopter for jointing CPVC pipe all as specified and directed. |
| 60 | Supply only 40mm brass elbow for jointing CPVC pipe all as specified and directed. |
| 61 | Supply only 40mm brass elbow (3/4 X ½) for jointing CPVC pipe all as specified and directed. |
| 62 | Supply only 40mm brass Tee for jointing CPVC pipe all as specified and directed. |
| 63 | Supply only 40mmmale brass threaded adaptor (MTA/ MBTA)for jointing CPVC pipe all as specified and directed. |
| 64 | Supply only 40mmfemale brass threaded adaptor (FTA/ FBTA)for jointing CPVC pipe all as specified and directed. |
| 65 | Supply only 40mm Union for jointing CPVC pipe all as specified and directed. |
| 66 | Supply only 40mmtank adopter for jointing CPVC pipe all as specified and directed. |
| 67 | S & Ffancy type Bib taps with wall flange, cromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete complete all as specified and directed.(Make: Jaquar Cat Part No. FUS-29037 or Equivalent make as per list of Makes in PS.) |
| 68 | S & Ffancy type Two way Bib taps with wall flange, cromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.(Make: Jaquar Cat Part No. FUS-29041 or Equivalent make as per list of Makes in PS.) |
| 69 | S&F of CP fancy type angular stopcock 15mm dia with wall flange completeall as specified & directed.(Make: Jaquar Cat Part No.FLR-5053N or Equivalent make as per list of Makes in PS.) |
| 70 | S&F vitreous China under counter wash hand basin with fixing accessories, ofsize 605 x 410 x 200mm including 32mm dia brass chromium plated waste coupling but excluding tap, waste chain, plug and porcelain stopper complete all as specified and directed. (Make: Jaquar Cat Part No.FNS-WHT-40701 or Equivalent make as per list of Makes in PS.) |
| 71 | S & F Corner glass/sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 72 | S&F soap dish holder of CP completeall as specified & directed.(Make: Jaquar Cat Part No.CPA-1131 or Equivalent make as per list of Makes in PS.) |
| 73 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 74 | S&F CP towel rinbg square with round flange complete all as specified & directed.(Make: Jaquar Cat Part No. ACN-1121N or Equivalent make as per list of Makes in PS.) |
| 75 | S & F in repair Single Towel Rail 600mm Long, Stainless Stee complete all as specified & directed. (Make: Jaquar Cat Part No. ACN 1111SM or Equivalent make as per list of Makes in PS.) |
| 76 | S & F in repair Toilet paper Roll Holder with Stainless Steel Flap complete all as specified & directed. (Make: Jaquar Cat Part No. ACN-1153S or Equivalent make as per list of Makes in PS.) |
| 77 | S & F in Health Faucet spray with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified & directed. (Make: Jaquar Cat Part No.ALD-565 or Equivalent make as per list of Makes in PS.) |
| 78 | S & F bottle trap 32mm sizewith 300mm & 190mm Long Wall Connection Pipes & Wall Flange complete all as specified & directed. (Make: Jaquar Cat Part No. ALD-769L300x190 or Equivalent make as per list of Makes in PS.) |
| 79 | S & Fsingle piece slim concealed cistern body with installation kit & “P type” Drain Pipe connection Set for wall hung WC (without flush control plate)complete all as specified & directed. (Make: Jaquar Cat Part No.JCS-WHT-2400P or Equivalent make as per list of Makes in PS.) |
| 80 | S & Frimless wall hung WC with inbuilt jet, PP soft close slim seat cover, hinges, accessories set of size: 355x555x370 mmcomplete all as specified & directed. (Make: Jaquar Cat Part No. FLS-WHT-5953JPPSM or Equivalent make as per list of Makes in PS.) |
| 81 | S&F600 mm x 450 mm bevelled edge looking mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood & fixed to wooden plugs with chromium plated brass screws & cup washers. Complete all as specified and directed. |
| 82 | S&F 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete. |
| 83 | S&F 40 mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 84 | S&F 32 mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 85 | S&F Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed. |
| 86 | M & L for cleaning of surface thoroughly from dust &dirt and cement slurry @ 3 Kg / Sqm shall be applied thoroughly. The provide 10 mm thick screed bed in CM 1:4 mixed with integral water proofing compound as per manufacturer\"s instructions, after setting and drying cement mortar, the entire surface of the roof slab shall be cleaned thoroughly to remove all loose particle / dust / dirt particle and applying a coat ofhot blown grade bitumen primer grade 85 / 25 @ 1.20 Kg Par Sqm shall be applied over priming surface. APP based polymeric membrane of minimum weight 3 Kg/Sqmand a minimum 3mm thick reinforced with polyester nonwoven fabric (weight not less than 150gms/Sqm) shall be laidon roofand on vertical surface uptoand insert in grooves and packed in CM (1:3) with overlaps in membrane 100mm,The over laps shall be sealed by flamesor as per manufacturer\"s instructions.and finally it will be finished with two coats of bituminous based aluminium paintincluding taking down of existing roof treatment,properly cleaning & drying the concrete surfaces complete all as specified and directed.(Note: Integral water proofing compound shall be measured and paid separately in Supply only item.) |
| 87 | M&L for treatment of soil along the external wall below concrete ormasonry apron using chemical emulsion@ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 88 | M&L for treatment of soil under existing floorsusing emulsion @ one litre per hole,300mm apart including drilling andplugging 12mm dia holes with cementmortar 1:2 (1 cement: 2 coarse sand) tomatch the existing floorscomplete all as specified and directed. |
| 89 | S & F rotational moulded polyethylene water storage tanksof capacity 1000 litres, double layer construction, ISI marked ,(Cylindrical vertical with closed top), hoisted and fixed in positioncomplete all as specified in SSR Part I and as directed. |
| 90 | S & F 25 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and directed. |
| 91 | S&F 25mm dia Float valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed. (minimum weight 455 gms) complete all as specified and directed. |
| 92 | M & L for 25 mm thick, plain cement concrete 1:2:4,type B-0 (using 12.5 mm graded stone aggregate)as in sub-base of flooring, etc and finished the surface even and rough to receive the topping layer complete all as specified and directed. |
| 93 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 94 | M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm/450mm x 350mm/300mmx450mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:3 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 95 | M&L 18 to 20mm thick Granite stone slabs (Black/Ruby Red) work (table rubbed and polished) as in cooking platforms/ floors bedded and jointed with grey cement slurry and pointed to match the shade of granite stone including grindingand polishing types including screed bed 15 mm thick in cement mortar 1:6, complete all as specified and as directed. |
| 96 | M & L for 75 mm thick,plain cement concrete1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 including necessary formwork complete all as specified and directed. |
| 97 | S&F 75 mm size PVC (SWR) floor trap, with grating ofincluding jointing and fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 98 | S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 99 | S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 100 | S&F 110mm bore PVC (SWR) bends any type complete all as specified and directed. |
| 101 | S&F 75mm bore PVC (SWR) bends any type complete all as specified and directed. |
| 102 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cementcomplete all as specified and directed. |
| 103 | M&L for PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in concrete bedto drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specified and directed. |
| 104 | M&L for precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for Drains etc) and similar work including necessary form work set in CM 1:6 complete all as specified and directed. |
| 105 | M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses etc and similar work including necessary form work complete all as specified and as directed. |
| 106 | Supply and laying UPVC pipe (SCH-40), 150mm bore dia including jointing with coppler complete all as specified and directed. |
| 107 | M&L for extra for forming fair finished drain orchannel 30 cm inner girth in cement concrete, using ex- tracement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed. |
| 108 | M&L for excavating in post holes (orsimilar holes) each n exc 0.5 Cum getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 109 | S & F steel work in tubular trasses including special shaped washer using ERW or induction butt welded tubes of any shape as directed conforming to IS 1161-1979 grade St -240. complete all as specified and directed. |
| 110 | S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410- W(Gde-E-250) quality -A complete all as specified and directed. |
| 111 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410- W(Gde- E-250) also welding, fastening and fixing complete all as specified and directed. |
| 112 | S&F Mild steel screw bolts (machine made) 11 to 15mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and n exc 10cm long complete all as specified and directed. |
| 113 | S&F Pre- painted galvalume aluminum zinc coating Gl based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall of mangalore pattern design, fixed with self tapping screws as specified & directed. |
| 114 | S&F Pre- painted galvalume aluminum zinc coating Gl based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall of mangalore pattern design, fixed with self tapping screws as specified & directed. |
| 115 | S&F 6mm thick polycarbonate FRP sheet made out of finest lexan polycarbonate sheet from GE plastic with durable light weight, transperant and highly impacked resistant thermoplastic sheet used for roofing and glazing application with high impact resistance, UV protection, thermal insulation, temperature resistance alongwith colour and texture option complete all as specified and directed. |
| 116 | S & F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties, flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drillingbolting or riveting etc conforming to Fe – 290 Gde E – 165 complete all as specified and as directed. |
| 117 | M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed. |
| 118 | M&L for complete removal of existing paint from old decorated surface, preparation ofwall surfaces by washing down, rubbing, and removing stains, including application of Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.Notes:(i)After drying of primer coat, surface shall be sanded with zero-grade abrasive paper, ensuring primer is not rubbed off. Surface shall be dusted clean. Emulsion paint shall be applied in accordance with manufacturer\"s instruction.(ii)Rate to include scaffolding and all safety measures at site. |
| 119 | M&L for 75mm thick Plain cment concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed. |
| 120 | M & L Machine pressed precast concrete interlocking paver block any shape prepared with grey cement and pigment of size confirming to IS 15658-2006 of 60 mm thick M-35 Grade laid over sand cushioning layer complete all specified and directed. (Note: Sand cushioning shall be measured and paid in relevant item.) |
| 121 | M&L for sand filling under floors or in foundations including watering and consolidation for cushioning complete all as specified and as directed. |
| 122 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 123 | M & L for modular point wiring concealedon wall and ceiling/roof etc with necessary fixing arrangements with PVC-FRLS insulated and unsheathed multi-stranded copperconductor of size 1.5 Sqmm, 1100 volts grade drawn through and including rigid non metallicPVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc with captive MS screw including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching/finishing of new surfaces either by means of plaster of perish/ Putty or distemper / colour wash with same existing colour surfaces all as specified and directedfor one Light Point/ Fan Point/ Bell Point complete all as specified and as directedNote: The cost ofcutting chiseling and making good item shall deemed to be included in quoted rate. |
| 124 | S&F modular switch 6 Amp, 1 way, 1 module size complete all as specified and directed. |
| 125 | S&F ceiling rose surface Polycarbonate/ PVC three terminal complete all as specified and directed. |
| 126 | S&F modular metal flush box alongwith modular white cover plate including frame, 3 module complete all as specified and directed. |
| 127 | S&F modular metal flush box alongwith modular white cover plate including frame, 6 module complete all as specified and directed. |
| 128 | S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder includingLED tube light and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 129 | S&F exhaust fan,made out ofstudy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm with and including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 130 | S&F double door metallic sheet metal enclosure for DBs when MCB to be used,SPN, 4 ways 240 Volts (horizontal type)fixed properly on in concealed position and to provide required size of flexible conduit at any open surface near DBs for cable / wires complete all as specified and as directed. |
| 131 | S&F MCB 6 to 32 Amps, SPN, 240 Volt \"C\" series, breaking capacity 10 KA complete all as specified and as directed. |
| 132 | S&F MCB 6 to 32 Amps, SP, 240 Volt \"C\" series, breaking capacity 10 KA complete all as specified and as directed. |
| 133 | M&L for earthing complete with galvanized steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.0 mm dia bymeans of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No-3 SSR Part -1 2009 connected to earthing test point including earth wire protection pipe of dia 15 mm (medium grage), excavation and earth work, disposal of surplus spoil, provn of RCC cover 50 mm thick, reinforced with 8mm dia TMT bars @100 mm /C/C both ways with one handle for lifting made out of 10 mm dia TMT bar embedded in precast cover slab and PCC (1:3:6) type C-1 concrete pit, funnel with watering pipe 20 mm bore (light grade) testing on completion complete all as specified and directed. [Note : (a)Proper earthing pit should be provided with pit cover. (b) Excavation/earthwork is deemed to be included in the quoted rate.] |
| 134 | Supply, laying and testing of XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.00 sq mm 2 core shall be laid under trench or pipe or loop or shall be fixed on wall / pole including taking out old unserviceable cable complete all as specified and directed.(Note: Earthwork , excavation, sand coushioning, GI pipe etc. shall be measured and paid separately uinder relevant item) |
| 135 | M&L for sand cushioning / sand covering for underground cable protection and consolidated and compacted with clean dry sand complete all as specified and as directed.Note: Punned thickness of sand cushioning only shall be measured for the purpose of payment. |
| 136 | M&L for Sub Class B bricks common burnt clay building bricks designation 75 Kg/Sqmmcomplete all as directed. |
| 137 | Supply and laying 25 MM bore diaGI tubes, light grade galvanised with all fittings laid in trenches etc for protection of cable complete all as specified and directed. |
| 138 | S&F 25 mm bore Gl tubes, \"medium grade\" galvanised, with all fittings laid in trenches Complete all as specified and directed. |
