|
| 1 | M&L forpreparation of old plastered surfaces and applying a coat of cement based paint on walls, facia , cornice, chajja upto 16 meter height of the bldg includng necessary scaffolding/staging , complete all as specified and directed. |
| 2 | M&L forpreparation of old plastered surfaces and applying two coat of cement based paint on walls, facia , cornice, chajja upto 16 meter height of the bldg includng necessary scaffolding/staging , complete all as specified and directed. |
| 3 | M & L for applying 1mm putty on old plastered or un-plastered surface of wall/ceiling all as specified and as directed by the Engineer-in-Charge |
| 4 | M & L for applying two coat of oil bound distemper all as specified and as directed by the Engineer-in-Charge |
| 5 | M&L for preparation of existing surface of walls by brush, sand paper, surface repair if required , fillingputty in holes etc and applying one coat ofoil bound distemper white or any tint complete all as specified and directed. |
| 6 | M&L for preparation of old plastered or un-plastered surface of walls and applying one coat of white wash (lime) complete all as specified and directed . |
| 7 | M&L for preparation of old plastered or un-plastered surface of walls and applying two coat of white wash (lime) complete all as specified and directed . |
| 8 | M&L for preparation of old plastered or un-plastered surface of ceilingand applying one coat of white wash (lime) complete all as specified and directed . |
| 9 | M&L for complete removal of existing treatment and preparation of surfaces of walls by scrapping/sand preparing / rubbing and finally washing with watering and applying a coats of exterior emulsion lacyrlic weather proof antifungal paint over a coat of exterior grade arimer upto 16 meter height of the bldg, complete all as specified and directed. |
| 10 | M&L for preparation of existing surfaceand applying a coats of terracotta paint on walls, facia , cornice, chajja upto 16 meter height of the bldgincluding necessary scaffolding/ staging and formwork, complete all as specified and directed. |
| 11 | M&L for preparing old or previously treated surfaces of wood or wood based materials of any description not otherwise describedover 10 cm width or girth and applying one coat of synthetic enamel paint to match the existing surfaces, complete all as specified and directed. |
| 12 | M&L for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 13 | M&L for writing or repainting letters or figures (Block, Roman, Italic, Indian) exc 15cm but n.exc 30 cm in height and line of letters figures n.exc 2cm wide (Bldg No / Name ) etc with one coat of synthetic enamel paint all as specified and as directed. |
| 14 | Hacking out old broken glass (any thickness,any quality or description)from wooden frames or stone,concrete or brick surrounds,glazed with putty or fixed with beadscomplete all as specified and directed. |
| 15 | S&F 3 mm thick sheet glass, Ordinary quality and glazingin square n. exc 0.5 Sqm in each pane or glazing with oil glass putty complete all as specified and as directed Note:- (i) Work will be executed up to height of 6 meter for G+1 and no extra payment will be considered for extra height and for temporary scaffolding. |
| 16 | S&F, in repair galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of a-pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed.Note:- (i) Work will be executed up to height of 6 meter for G+1 and no extra payment will be considered for extra height and for temporary scaffolding. |
| 17 | S&F 3 to 5 mm thick fibertransparent sheet glazing type, not exc 0.50 sqm in each panefixed to wooden/ steel window fixed with oil putty/screw/woden beads complete all as specified and directed.Note:- (i) Work will be executed up to height of 6 meter for G+1 and no extra payment will be considered for extra height and for temporary scaffolding. |
| 18 | M & L for applying a coats ofHeat/fire resisting paint on concrete,brick, stone,wood, steel, iron, etc.,exceeding 10cm in width or girth completeall as specified and as directed. |
| 19 | M & L for preparation of Old /New plastered surface of wall and applying two coats of cement base paint (Camouflage pattern) on external wall/Roof surface completeall as specified and as directed. |
| 20 | M&L for mirror grinding & polishing on old marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed. |
| 21 | Demolition ofBrickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete all as specified and as directed. |
| 22 | M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6), rise of hight for brick wall complete all as specified and as directed. |
| 23 | M&L for rendering 10mm thick on fair faces of wall even and smooth finish without using extra cement onconc/brick surfaces in CM 1:6, complete all as specified and as directed |
| 24 | Taking down cement or cement lime plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.. |
| 25 | M&L renderig 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth with out using extra cment complete all as specified and as directed. |
| 26 | M&L for preperation of new plastered surface and applying two coats of white wash on newly plastered surfaces of ceiling/wall complete all as directed. |
| 27 | Taking down 15 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed. |
| 28 | Taking down 20 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed. |
| 29 | S&F 15 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and as directed. |
| 30 | S&F 20 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and as directed. |
| 31 | Fixing only old steel tubing and connections obtained from taking down against item No 8(a) & (b) herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings of 15mm dia pipe complete all as specified and directed. |
| 32 | Fixing only old steel tubing and connections obtained from taking down against item No 8(a) & (b) herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings of 20mm dia pipe complete all as specified and directed. |
| 33 | S & F 500 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S & F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed. |
| 34 | S & F 1000 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S & F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed. |
| 35 | S&Fin repair20 mm boreBall valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc complete all as specified and as directed. |
| 36 | S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 37 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but not exc 4 Sqm each etc complete all as specified and as directed. |
| 38 | Taking down shutters of any description exc 1 sqm and n.exc 2 Sqm each etc complete all as specified and as directed |
| 39 | S&F factory made solid panel PVC door shutter 30mm thick (style) constiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour PVC sheet for top rail lock rail & botom rail on either side and as gap insert for top rail bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/selaed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement and fix in the frame at site complete all as specified and as directed |
| 40 | S&F solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, etc complete all as specified and as directed |
| 41 | S&F, 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by the Engineer-in-Charge |
| 42 | S&F, locally fabricated 30 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed |
| 43 | S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long etc complete all as specified and as directed |
| 44 | S & F butt hinges medium weight cold rolled, mild steel and fixed 100 mm size etc complete all as specified and as directed.. |
| 45 | S&F but hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, type C-21 100 mm size in toilet for PVC doors etccomplete all as specified and as directed. |
| 46 | S&F300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloycomplete all as specified and as directed. |
| 47 | S&F galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of a-pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed |
| 48 | M&L for preparation new wooden surface of any description not otherwise described over 10 cm width or girth and applying two coat synthetic enamel paint over one coat of pink primer etc complete all as specified and as directed |
| 49 | Tacking down of shutter any size and refixing in the same opening of door/window/cupboard wooden shutter With or without taking downof any description not exceeding 2 Sqm each including easing and adjusting as required complete all as specified and as directed by Enineer-in-charge |
| 50 | Welding in repairs n. exc 10 cm in length n exc 6mm thickness of metal to be welded complete all as specified and directed. |
| 51 | Dismantling wrought iron or mild steel work of any description not otherwise provided all as directed and as directed |
| 52 | S & f of framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe-410-W (Gde-E-250). |
| 53 | S&F in repairs Vitreous chine wash down water closet pan(padestal pattern), white(EWC) including plastic seat of same colour of Wc, closed pattern with flat bottom, and cover mild steel chromium plated hinging devicecomplete all as specified and as directed. |
| 54 | S & F in repair EWC Seat cover of existing colour, any size including fixing arrangements and taking of existing seat covercomplete all as specified and as directed. Make : Parryware/CERA/Hindware/Johnson |
| 55 | S&F in repair 10 Ltrs capacity PVC flushing cistern valveles syphonic action type low level, white, with inlet ball valve, float & handle incl brackets & flush pipe complete all as specified and directed. |
| 56 | Supply and fixin repair vitreous china wash basin white flat back size 630x450mm including cutting for and pinning in ends of brackets or erecting stand,waste coupling,32 mm bore PVC waste pipe of suitable length,and connection completeall as directedcomplete all as specified and as directed. |
| 57 | S &F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (inxcluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 58 | Suppy and fixing for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and as directed. |
| 59 | S&F CP Brass soap dish fixed to wall with cp brass screws etc complete all as specified and as directed by the Engineer-in-Charge. |
| 60 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed. |
| 61 | Supply and fixing in repairPVC waste pipe with 32 mm bore and 65 cm long with cap complete all as specified and directed. |
| 62 | S&F in repair 15mm bore fancy type chromium plated bib cock short/long body with flangeetc complete all as specified and as directed. |
| 63 | S&Fin repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot\" or ‘Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 64 | S&F in repair 15mm bore cast copper alloy chromium plated angle cock with flangecomplete all as specified and as directed. |
| 65 | S&F in repair brass chromium plated health faucetfor EWC screwed down to GI tubing/fittings 15mm dia incl 1200mm long stainless steel connection complete all as specified and directed. |
| 66 | S&F in repair PVC floor trap outlet dia 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)complete all as specified and as directed. |
| 67 | S & F CP Towel ring, complete all as specified and directed |
| 68 | S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union and fixedcomplete all as specified and as directed. |
| 69 | S&F in repairFancy type , Stainless Steel curtainrodof any size with end knob ( 2 nos per length ) Fancy type and end brackets ( 2 nos per length ) andfixed on wall etc complete all as specified and as directed. |
| 70 | Supply and Fixing in Repair Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 71 | Demolition and breaking up drain pipes (Salt glazed ware, AC/PVC/CI or Reinforced concrete) set in cement mortar in floors or wall in 100mm dia metercomplete all as specified and as directed. |
| 72 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall/trenches with clamp out of 25x3mm flate Iron including bolts and nuts complete all as specified and as directed. |
| 73 | S &F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or walland complete all as specified and directed. |
| 74 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed. |
| 75 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed. |
| 76 | S&F PVC (SWR) junction single, (single T) equal or unequal 75mm bore with access door complete all as specified and as directed. |
| 77 | S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and as directed. |
| 78 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed. |
| 79 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and as directed. |
| 80 | M&L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement complete all as specified and as directed. |
| 81 | M&L, screed bed or bedding layer of mortar 15 mm thick in cement mortar 1: 6 to receive tiles etc finished rough complete all as specified and directed. |
| 82 | M&L for non skid coloured ceramic tiles 6 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etc completeall as specified and as directed. |
| 83 | M&LCeramic tiles light or dark shed 8-10 mm thick, (square/ rectangular),area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm,polished, in floors etc.jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 84 | M&LCeramic tiles light or dark shed8-10 mm thick, (square/ rectangular),area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm,as in skirtingfixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 85 | Material and labourforcolour printed glazed ceramic tiles (300x 450mmand7 to 10 mm thick asin wall,dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge. |
| 86 | M & L Machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick cement screed bed in CM 1:6 laid laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 87 | M&L for 15-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete all as specified and as directed. |
| 88 | Demolition of PCCin any description and in any positionetc complete all as specified at site complete all as specified and as directed. |
| 89 | M&LPCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/flooring complete all as specified and directed. |
| 90 | M &L chequered tiles (Cement) 30cm X 30cm x20- 25mm set and jointed and pointedin neat cement slurry infloor with grey cement andpigment over & including 15mm thick screed bed in CM (1:6) Complete all as specified and directed. |
| 91 | M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 92 | M&L 60 mm thickness M-35 Grade , machine pressed precast concrete Inter locking paver blocksany shape & size with grey cement and pigment conf to IS-15658-2006laid dry oversand cushion complete all as specified and as directed.(Sand cushion shall be measured and paid separately) |
| 93 | Dismantling plain or corrugated steel sheeting , any gauge thickness including Nanital or similar pattern roof covering all as specified and as directed. |
| 94 | S&F, pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws /J hook completeall as specified and as directed. |
| 95 | M&L Roof trusses,trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including complete all as specified and directed. |
| 96 | Dismantling of timber scantling 40 sqcm and over for framed work and over in section, in any position complete all as specified and as directed. |
| 97 | M & L two coat of synthetic enamel paint over one coat of red oxide, zinc chrome primer on steel surfaces, surfaces of any description , over 10cm width or girth not other wise described complete all as specified and as directed. |
| 98 | S & F false ceiling with 3 to 4 mm thick Asbestos tiles laminated with white PVC film on face side & metalized polyster film (Aluminium foil) on the back side with all four edges sealed with PVC film of size 600 x 600 mm (595 X 595 mm) fixed with clips & screws including silver coating GI snap grid frame work for false ceiling of Tee/Angle of weight not less than 300 gm per RM with slot for fixing including necessary suspender of flat iron or 2 mm dia bars of required length fixed in purlin of roof not exceeding 1.20 m both ways including all accessories required for suspending ceiling workcomplete all as specified and as directed by the Engineer-in-Charge |
| 99 | S&F forhollow PVC lining consisting of 5 mm thick plain colourPVC sheet fixing with solvent cement, screw/nails on wall/ceiling for interior decorationincluding disconnecting and refixing of electric light board complete all as specified and as directed. |
| 100 | Dismantling ceiling boards (fiber,PVC,pulp,insulation etc) or wall board complete all as specified and as directed |
| 101 | Removing existing water proofing treatment by brushing with wire brush, taking down cement concrete tile, existing plaster/cement concrete/lime coba etc in any thickness, cleaning of all foreign material such as fungus, moss, dust etc and remove from the site of all waste materials, roughing surface of corner to roof by wire brush and all the open cracks/honeycomb should repair properly with site made polymer mortar (cement: sand: 1:4) admixed with HS Latex Plus @10% by weight of cement. complete all as specified and directed. |
| 102 | M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stilgreen finished even and fair including mixing ofwater proofing compound as per manufacturer instructionetc complete all as specified and as directed.Note :- Water proofing compound shall be measured separately |
| 103 | Supply only integral water proofing compound complete all as specified and as directed. |
| 104 | Providing and applying two coats of HS Elastoseal BTD a waterbased, single component, UV resistant elastomeric PU liquid membrane in white / terracotta / green colour. better UV resistance, we recommend use of white colour BTD, having SRI Index > 109, having solid content 80%, Elongation 400%, Tensile 2MPa, with the help of brush/Roller with the coverage of 2Kg/Sqm over a primer coat of Elastoseal BTD : Water (1:1) to achieve DFT of 1.5mm, Sandwich 40GSM fibre-mesh in between two coats etc. complete as per manufacturer recommendations complete all as specified and directed. (Make Berger paints or equivalent make specified in Appendix B to PS) |
| 105 | Note for item No. 102 to 105 :-The work for periodical services shall include the following and the rates quoted by the bidders shall include the same :-(a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer ofthe materials like Exterior Emulsion paint, putty etc after approval by the GE. (b) The Contractor shall upload with the documents under cover I \"Memoradum of Understanding\" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected.(c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures.(d) Removing of Nails, making good holes, cracks etc(e) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary.(f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes.(g) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge.(h) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work. |
| 106 | Notesfor all items(i) Any CI/AC/PVC pipes or pipe fittings damaged during the process of work shall be replaced by new one without any extra cost to the department. The decision of the GE in this regard shall be final and binding.(ii)The debris including vegetation plant/trees shall be disposed off to a distance exc 0.5 Km and n.exe 1.00 K m all as directed by engineer -in charge.(iiI) For deciding the girth of the plant/tree the height shall be taken at 30 cm above the slab/wall.(iv)The labour employed by the contractor for carrying out the work shall be provided with safety equipment and quoted shall be deemed to include the same. (v) All windows, joineries, mirrors, fittings, doors etc. shall be covered before painting the surfaces and the same shall be cleaned including cleaning of floors as directed by the Engineer-in-Charge, failing which a recovery shall be done from the RAR as decided by Garrison Engineer and the quoted rate is deemed inlusive of these provisions. |
