|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge., supply of all labour, tools and other charges etc. complete. |
| 2 | Providing and laying cement concrete 1:3:6 (One cement, Three M sand and Six graded stone aggregate of 40mm and down size) for foundation including mixing of concrete, laying, compacting, curing etc including supply of all materials, labour, tools & plants etc complete as directed. |
| 3 | Brick masonary in cement mortar 1:5 (One cement, 5 M sand) in superstructure with first quality wire cut burnt bricks of approved quality as per drawing including necessary scaffolding, supply of all labours, tools, materials , curing etc. complete as directed. |
| 4 | Upto plinth level |
| 5 | Upto 2nd floor |
| 6 | Providing and laying in position of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 M sand : 3 graded stone aggregate 20 mm nominal size), excluding the cost of centering, shuttering and reinforcement and including cost of all materials, labour ,tools and plants,curing etc .complete |
| 7 | All work up to roof levelincluding supply of all materials, labour, tools & plants etc complete as directed. |
| 8 | Reinforcement for RCC work with Tor steel of Fe 500 grade of approved quality, including cutting, bending, shaping, binding with annealed steel wire of approved gauge, placing in position etc as directed, including supply of all materials, labour, tools & plants etc complete as directed. |
| 9 | Centering and shuttering including strutting, propping and cost of all materials, labours, tools and plants etc .complete and removal of form |
| 10 | forLintels, beams, plinth beams, girders, bressumers and cantilevers .with all materilas and labour charge scaffolding ,tools and plants etc. complete as directed. |
| 11 | Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc. |
| 12 | 15/20 mm thick cement plaster 1:3 (1 cement: 3P sand) on the rough side of single or half brick wallincluding cost of all materials, labours ,tools and plants, scaffolding etc .complete as directed. |
| 13 | Applying one coat of water thinnable Exterior cement primer of approved brand and manufacture on wall surface as directed including cost of all materials, labour, tools & plants ,scaffolding etc complete. |
| 14 | Wall paintingtwo coat with Exterior emulsion paint of approved brand and manufacture to give an even shade including cost of all materials, labours ,tools and plants ,scaffolding etc .complete . |
| 15 | Wall painting with Interior acrylic emulsion paint of approved brand and manufacture to give an even shade :including cost of all materials, labours ,tools and plants ,scaffolding etc .complete |
| 16 | Painting with synthetic enamel paint (Asian / Berger) two or more coats of approved colour and make to give an even shade to the wooden doors & windows over a coat of wood primer as directed including cost of all materials, labour, tools & plants etc., complete. |
| 17 | Supply of local available earth free from roots & other vegetation including supply at site, carrying by trolly / wheel barrow/ head load, spreading, levelling, compacting on the low lying area inside the Lighthouse compound as directed at site including supply of all materials, labour, tools & plants etc complete as directed. |
| 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length.- Seceond class teak wood. |
| 19 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per direction of Engineer-in-charge. Second class teak wood - 30 mm thick shutters. |
| 20 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete including cost of all materials, labour, tools and plants.- Fixed to openings /wooden frames with rawl plugs screws etc. |
| 21 | Providing and fixing Frame size 65 x 100 mm factory made single extruded FRB/UPVCsolid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. |
| 22 | Providing and fixing to existing door frames- 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shuttershall be reinforced with special polymeric reinforcements as permanufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. |
| 23 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : -W.C. pan with ISI marked white solid plastic seat and lid. |
| 24 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Angle back wash basin size 400 x400 mm with single 15 mm C.P. brass pillar tap. |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 26 | 20 mm nominal outer dia Pipes. |
| 27 | 25 mm nominal outer dia Pipes. |
| 28 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 29 | 32 mm nominal outer dia Pipes. |
| 30 | 50 mm nominal outer dia Pipes. |
| 31 | 100 mm nominal inner dia Pipes. |
| 32 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : including cost of all materials, labour, tools and plants etc complete as directed - 15 mm nominal bore. |
| 33 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931, including cost of all materials, labour, tools and plants etc complete as directed- 15 mm nominal bore. |
| 34 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, including cost of all materials, labour, tools and plants etc complete as directed- 15mm nominal bore. |
| 35 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :including cost of all materials, labour, tools and plants etc complete as directed - 100 mm diameter. |
| 36 | Providing and fixing C.P. brass Health faucet with connecting pipe etc complete with 15 or 20 mm inlet: including cost of all materials, labour, tools and plants etc complete as directed. |
| 37 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :including cost of all materials, labour, tools and plants etc complete as directed - Rectangular shape 453x357 mm. |
| 38 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms, including cost of all materials, labour, tools and plants etc complete as directed. |
| 39 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour - 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 40 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete, including cost of all materials, labour, tools & plants etc. - Size of Tile 600x600 mm. |
| 41 | Providing and laying vectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS :15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete including cost of all materials, labour, tools & plants etc complete as directed. |
| 42 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade completeincluding cost of all materials, labour, tools & plants etc complete as directed. |
| 43 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design including cost of all materials, excavation, labour, tools & plants etc complete. |
| 44 | Making plinth protection 50mm thick cement concrete 1:3:6 ( 1 cement, 3 sand , 6 stone chips ) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with Fine sand, including necessary excavaton , levelling and dressingand finishing the top smooth, including supply of all labours ,materials, tools and plants and all other charges etc. |
| 45 | Providing and fixingdouble leaf cupboard with drawer arrangements( add locking arrangement ) of commercial MR grade ply wood of approved make and necessary horizontal shelves supported on 18mm thick ply vertical fins with 12mm thick ply back side to the wall and laminated using 1mm thick white laminates/sunmica. hardwares like handle, lock, magnets,tower bolt magnets ,pivots ,hinges to be of ozene /dorma /ebco or equivalent make.All exposed ply face to be cover with sunmica complete. Supply of all labour ,materials , tools and plants and all other charges etc. complete. |
| 46 | Supplying and fixing following size/ modules GI box/ PVC surface box alongwith modular base & cover plate for modular switches in recess/surface etc. as required. |
| 47 | 4 Module (125mm * 75mm) |
| 48 | 6Module (200mm * 75mm) |
| 49 | 8 Module (250mm * 75mm) |
| 50 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 51 | 10 Amp switch |
| 52 | 3 pin 10 Amp socket outlet |
| 53 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 54 | Supplying & fixing pvc batten/ angle holder including connection etc as required. |
| 55 | Installation , testing, commissioning of wall bracket/ celling fittings of all sizes and shapes containing upto two GLS/CFL/LED surfacelamps per fitting, complete with all acessories including connection etc as required. |
| 56 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 57 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm Sweep |
| 58 | Supplying and fixing of following sizes of medium class PVC conduit /Cassing capping along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm (PVC pipe) |
| 59 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 60 | 2 x 1.5 sq. mm (4 coil of 100 mtrs) |
| 61 | Supplying and fixing of DP sheet steel enclouser on surface/recess alone with 25/32 A , 240 volt \"c\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 62 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 63 | Single pole 16A |
| 64 | Supllying and fixing two module stepped type electronics fan regulator on the existing modular plate switch box excluding modular plate etc. as required. |
| 65 | Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench, pathway cuttingetc as required, but excluding sand coushioning and protective covering and end to end connection. up to 35 sq mm. |
| 66 | Earthing with G.I earth pipe 2.7 metre long, 40mm dia including acessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipeetc. with charcoal/ coke and salt as required. |
| 67 | Providingand laying earth connection from earth electrode with 6 SWGdia GI wire in 15 mm dia G.I.Pipe from earth electrode including connection with copper thimble exceavation and re-filling as required. |
| 68 | 12 watt LED lamp of B-22 holder. |
| 69 | Exhaust Fan 225mm, metal blade, light duty domestictype.Make-Reputed. |
| 70 | 12 Watt LEDbulkhead fitting for outdoor purpose. Make- Reputed |
| 71 | 2.5 Sq. mm, 3 – Core, Copper, single strand, PVC Sheath, XLPE, Armoured UG Cable – 1100 Volt Grade. Make - Reputed |
| 72 | Supply and fixing of PVC Junction Box, size - 140 mm X 140 mm X 95 mm (Make – Sintex) |
| 73 | Supply and fixing of LED 9-watt, 2-feet tube light batten. |
| 74 | Supply and fixing of Celling fan 1200 m sweep. |
| 75 | Supply and fixing of Revolving wall fan. (Speed and rotation by pull chord adjustment) |
| 76 | Insulation Tape 5 mtr roll. |
| 77 | Indicator 1-Modular. Make- Reputed |
| 78 | PVC 4X4 square Junction Box. |
| 79 | PVC round Junction box, 1\"\" , 2mm thick (1 to 3way). Each 6 nos. |
| 80 | Laying of wiring pipes during slab casting including cost of materials like PVC pipe, GI fan box (02 nos). |
