|
| 1 | Repairs to Pot Holes any depth not exceeding 1.00 sqm each including sweeping free from dust and mud or water, scouring sunken surfaces in roads, path etc. cutting edges at least 25 mm depth and making good by applying tack coat with bitumen @ 5 Kg/ X Sqm, putting in premix bituminous macadamusing paving bitumen of grade VG -30 well rammed and sealed with binder @ 9.80 kg mixed with 0.09 cum of stone chippings 6.3 mm size per 10 sqm and again well rammed incl. supply of premixed macadam, binder and chippings, depth of pot holes exc. 30 mm thick, compete all as specified and directed. |
| 2 | Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete |
| 3 | Applying evenly a tack coat of Cationic Bitumen Emulsion (RS-I) conforming to IS : 8887 at a rate of application of 0.2-0.3 Kg/Sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for road and bridge work 2013, using mechanical sprayer after cleaning of existing surface as specified and directed. |
| 4 | M&L for Premix Bituminous Macadam binder content at 4% by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed. |
| 5 | M&L for Bituminous Premix Semi-Dense Asphaltic Concrete 30 mm consolidated thickness with minimum 5.5% binder (Paving Bitumen any penetration) content by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and as directed. |
| 6 | M&L for painting lines, dashes (Continious/un-interrupted), arrow, letters, etc exceeding 10cm width with two coat of acrylic water base road marking paint including preparation of old concrete/ painted surface complete all as specified and as drected by Engr-In-Charge. |
| 7 | Supply and fixsolar cat eye aluminum alloy shall (100% water proofing design according to 65) ofsize 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified anddirected. |
| 8 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions |
| 9 | Supply and fixing Road Convex Mirror of Size 600mm fixed with Stainless Steel Pole of size 50mm dia with grouting in PCC 1:2:4 type B2 of 300x300x300mm in base of minimum pole height 1.75M complete all as specified. |
| 10 | Demoilition of Bricks (laid flat or edge) or brick tiles in floors, laid bedded and pointed in any mortar etc of any description. |
| 11 | Hard core of broken Bricks n exc 63mm, deposited, spread, leveled in layers n exc 15cm thick each layer including watering and well ramming to a true surface. |
| 12 | Surface excavation in soft/loose n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed. |
| 13 | Removing excavated soil exc. 250m but n exc 500m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 14 | M&L for PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in foundation , filling, mass concrete, sub base of flooring works complete all as specified. |
| 15 | M&L Machine Pressed Precast Concrete Inter Locking Rubber Moulded Paver Block any shape with grey cement and pigment size conforming to IS 15658-2006 of 80mm thickness,M-35 Grade laid over 50mm thick sand cushioning. Note :- sand shall be measured and paid separetly. |
| 16 | Supply only sand filling under floors complete all as specified and directed. |
| 17 | M&L PCC1:2:4 type B-1 (using 20 mm graded stone aggregates) as in coping complete all as specified and directed. |
