Tender For Beautification Of Mattan Town And Allied Work Advt.Cost=? 26.54 Lacs, Amount Without Gst= ? 22.49 Lacs, Gst Amount= ? 4.05 Lacs

Sharing tender

Tender For Beautification Of Mattan Town And Allied Work Advt.Cost=? 26.54 Lacs, Amount Without Gst= ? 22.49 Lacs, Gst Amount= ? 4.05 Lacs- 1 Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : 2 P/L of dry nallah soling tightly hand packed i/c carriage charges and headload charges complete job 3 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 4 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 5 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 6 Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. 7 Brick work with common burnt clay (non-modular) bricks of class designation 75 in foundation and plinth including curing Cement mortar 1:4 (1 cement: 4 coarse sand) 8 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. 9 Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in- Charge.18 mm thick 10 Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per designapproved by Engineer-in-Charge. Granite Work 11 Providing and fixing Acrylic letters (min. 6mm thick) including SMPS lighting system RGYB color scheme complete job. (thickness/ color scheme as per MC approved theme & directions of engineer in charg) 12 Supplying, Spreading, compaction of good earth at site including royalty in required thickness as per directions of Engineer in-charge complete 13 Proving/supplying of CI Park benches 3-seater including including wood colour finish and necessary fittings and carriage complete job 14 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded. Including M.S soffits incl all necessary frame work complete (including all carriages). 1 mm thick sheet metal with framework of ISA 35x35x3 mm and MS Sheet eaves boarding incl. all necessary frame work complete (incl all carriage). 1mm thick sheet metal with framework of ISA 35x35x3 15 Providing and fixing of chequered tiles 22 mm thick of approved quality in footpaths courtyards jointed with neat cements slurry mixed with pigment to match shade of tile over 20 mm thick 1:4 cement mortar leads lifts carriage from source to site of work complete job 16 Carriage of materials by using mech transport for an average lead of 50 kms.Sand/ Bajri 17 ElectricWiring for Circuit/Sub mains along with earth wire in FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, excluding cost of conduits. (Havells/ Polycab/ Finolex/ Anchor/KEI/RR or equivalent). 2x2.5 sq mm 18 Supply installation testing and commissioning of 20W Warm Focus light adjustable type with minimum system lumen efficacy of 100 lm/W,IP67,made of Pressure Die cast Aluminium fitted with clear glass and lenses, P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of (Philips/Mayfair MFPLL 915A) sample to be approved before installation. 19 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 20 Providing and laying in position cement concrete including curing but excluding the cost of shuttering and centring with 1:1.5:3 (1 cement, 1.5 Coarse sand, 3 Graded stone aggregate 20 mm nominal size). The dimensions of the block should be 2x1x1 21 Supply installation testing and commissioning of 12W/+ Warm LED Bollard Light with minimum system lumen efficacy of 100 lm/W,IP66/67, with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of two years,which includes replacement of fixtures (Mayfair MFBLLED 085 make) sample to be approved before installation.The Job also includes 4No. fasteners for each bollard. 22 Supply, installation, testing and commissioning of outdoor type warm LED strip light,IP65 rating, 6W+/mtr ,50LED+/mtr,energy saving and LM80 tested.The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of one year reckoned from the date of successful commissioning/ handing over of site to the intending department.Complete job. (Wipro/Havells/Phillips/Mayfair) 23 PANEL NO. 1Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel made out of 2mm thick M.S. sheet, , vermin and dust proof, Outdoor type with suitable size of angle iron legs grouted in the cement concrete., with lockable type hinged doors, duly painted with provision for fixing of incomer MCCB, outgoing DP MCBS, sets of Aluminium Bus Bar of different rating. after taking Derating factor into account, and other allied accessories etc. as required. the panel to be fabricated from reputed firm duly approved by CPRI.as per approved design, size may vary as per site requirement) 24 Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.INCOMING:b)100 amp DP MCB (Legrand/ Shinider/L&T/ABB make). 25 b) 2 No. of Aluminium Bus Bar of 200 Amp. 26 digital time switch astronomical (GIC ASTRO) 27 40/63A automatic modular contactor with manual override (Havells/L&T,Schnider) 28 OUTGOING:b)5-32 SPMCB 29 PANEL NO. 2Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel made out of 2mm thick M.S. sheet, , vermin and dust proof, Outdoor type with suitable size of angle iron legs grouted in the cement concrete., with lockable type hinged doors, duly painted with provision for fixing of incomer MCCB, outgoing DP MCBS, sets of Aluminium Bus Bar of different rating. after taking Derating factor into account, and other allied accessories etc. as required. the panel to be fabricated from reputed firm duly approved by CPRI.as per approved design, size may vary as per site requirement) 30 Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.INCOMING:b)100 amp DP MCB (Legrand/ Shinider/L&T/ABB make). 31 b) 2 No. of Aluminium Bus Bar of 200 Amp. 32 digital time switch astronomical (GIC ASTRO) 33 40/63A automatic modular contactor with manual override (Havells/L&T,Schnider) 34 OUTGOING:b)5-32 SPMCB 35 Supply, laying, connecting and commissioning of 16 sq mm 2 core XLPE/ PVC Insulated and steel armored 1.1 KV grade Aluminum LT cable for pathway poles, incl. cost of required al. thimbles duly crimped. (Over head/ under ground).(Havells/Polycab/KEI) 36 Supply, laying, and fixing of 25mm dia PVC Conduit (FRLS type), medium class, confirming to IS: 9537 standards, including all necessary accessories such as bends, couplers, tees, saddles, and junction boxes, complete as per site requirements and specifications. 37 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting the concrete path wherever required,jointing etc.direct in ground including excavation and refilling the trench with soft excavated earth making the surface level but excluding sand cushioning and protective covering etc., complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal) Please Enable Macros to View BoQ information