|
| 1 | Internal:- Supply and install flameproofhi wall spit units indoor/outdoor2 Ton capacity Supply and install 2.0 TRhi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air qualitycomplete all as specified and directed at site |
| 2 | Supply and install flameproofhi wall spit units indoor/outdoor1.5 Ton capacity Supply and install 2.0 TRhi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality complete all as specified and directed at site |
| 3 | Supply and fixwall mounted flame proof voltage stabilizer for automatic operation ,automatic voltage stablizer,singlephase,220 volts,Ac,50 z,copper wound,Ac,50 z,copper wound,Air cooled with digital display, output voltage 220 V+/-9% calibration accuracy +/-3%,low high cut off and intelligent time delay, input voltage 140 volts to 280 voltsof capacity 5.0 KVA complete all as specified and directed at site. |
| 4 | S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A,250V, 2P+earth complete all as specified and directed at site |
| 5 | S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 32A,250V, 2P+earth complete all as specified and directed at site |
| 6 | Supply and fixflame proof distribution board three phase TPNDB including suitable size of Flamproof incomer MCCB 4 Pole63 amps& out going MCBSP 32 Amps - 04 Nosand MCB SP25 Amps - 04Nos as per direction by Engr-in-Charge complete all as speciifed and as directed. |
| 7 | Supply and fixflame proof distribution board single phase ,SPN 8 waywith incomer MCB SPN 63 Ampsand out going MCB SP 20 Amps -06 Nos complete allper direction by Engr-in-Charge |
| 8 | M&L forconcealed/surface sub main wiringas per direction by engr-in-charge along with earthwirewiththeFR PVC insulated copper conductor, single core cable in recessed with steel Conduitas required with 2x4.0 sq mm + 1x4 sqmm earth wire with medium garde stove enammeled steel conduit complete all as specified and directed at site. |
| 9 | M&L forconcealed/surface sub main wiringas per direction by engr-in-charge along with earthwirewiththeFR PVC insulated copper conductor, single core cable in recessed with steel Conduitas required with 2x6.0 sq mm + 1x6 sqmm earth wire with medium garde stove enammeled steel conduit complete all as specified and directed at site. |
| 10 | M & L in repairsforCross arms, bracing, supports, clamps and back plate, fabricated from structural steel sectionincluding nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as directed including two coats of alminum paint over a coat of red oxide primer, complete all as directed. |
| 11 | External:- Supply laying & testing ofXLPE insulated, armoured, heavy duty electric under ground cable with stranded aluminum conductor, 1100 volts grade, laid in trenches, or fixed on poles & walls or laid under floorswith suitable size aluminum lugs complete of size 70 Sqmm nominal cross section 3.5 core complete all as specified and as directed. |
| 12 | All as per item No 11 (here in before ) but sizeof cable 35 Sqmm X3.5 core |
| 13 | M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr below normal ground level ) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to main GI strip 32 x 6 mm as earth strip by means of bolts ,nuts and washers of galvanised iron or steel as shown in electrical plate No. 3, including exc , and earth work in any type of soil disposal of soil providing alternate layers of charcol and common salt construction of PCC earth chamber in mix 1:3:6 type C-1 with 40 mm thick 1:2:4 type B-1 cover reinforced with 8 mm dia MS bars both ways with lift hook made out of 8 mm dia bar,watering arrangement. |
| 14 | Supply and fix in repairs GI strip 32 x 6 mm with PVC/porcelain insulators,nut bolts,fixing screws etc for copper earthing all as specified and directed by Engineer-in-Charge. |
| 15 | M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique/Manualand necessary machinesuitable for 40/50/80/100 mm GI pipe complete all as specified and directed at site |
| 16 | Cutting bituminous road/path for passing of elect cable through GI pipes and making good to the cut surfaces by concreating with PCC 1:3:6 to match with the adjescent surfaces complete all as dircted at site. |
| 17 | Supply and fixing steel tubes, galvanised, light grade, ISI marked 50 mm bore for protection of cable under floor, road and on wall complete. |
| 18 | Excavation in trenches, in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, or for shafts, wells, manholes, pier holes,cable laying, sewage/water lines etc complete all as specified and directed. |
| 19 | Returning,filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as specified and directed. |
| 20 | Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 21 | Material and labour for sand cushioning with dry river sand in trenches for cushioningof underground cable line including spreading, leveling, well ramming completed all as specified and directed. |
| 22 | M&L sub class B brick,well burn laid bridth-wise along the length the cable laid intrench over sandcushion,laid for ug cableprotection complete all as specified and directed at site. |
