Tender For Furnishing Work Of Mandar Branch As Per Tender Documents => Limited

Sharing tender

Tender For Furnishing Work Of Mandar Branch As Per Tender Documents => Limited; Section Interior Partition & Furniture work in Branch Grid False ceiling- Providing & fhing Saint Gobain Lafarge/KCS false ceiling 400x600x15 mm with Aluminum frame work as specified by above Co. with Aluminum suspenders wherever required. Making necessary frame work for A.C ducting If any and necessary cutouts for diffusers and light fittings,taping & finishing to proper ine & level including making grooves and trap doors for A.C unit in 18mm Th BWP(IS710) Grade plywood with stainless steel hinges & locks with moulding 1x1 for edge including finishing with white plastic Emulision paint etc. Fully glazed Toughened Glass Door: Providing and fhing in position fully glazed single/Double leaf toughened glass door in Branch made out of 12 mm thk, clear toughened glass. The door shall be provided with heavy gauge patch fittings, floor spring, SS. handle, special lock, etc. of approved make as per the requirement. The SS Handle to be of 22 mm dia and 300mm high. Work to be completed as per drawing and as directed by the Bank/Architect Door should have bank logo & Eatching as per bank. Solid Partition: Providing and fixing 65mm. Th solid partition as per drawing beside cash cabin & Canteen made out of aluminium hollow sections of 50mm x 50mm size 1.5mm thick of JINDAL/INDAL make es intemal framed structure placed horizontally & vertically in 550 mm x 550 mm/600mm x 600 mm center to center or as directed by the Architect with 6mm Th bwp plyboard (18710) on both side finished with 1mmTh laminates of approved make Jand colour as per bank Semi glazed Partition in B.M. Chamber: Providing and fxing seni glazed Partition in B.M Chamber up to False ceiling 8-6 height partition made out of aluminium hollow sections of 50mm x 50mm size 1.5mm thick of JINDAL/INDAL make as internal framed structure placed horizontally & vertically in 550 mm x 550 mm/600mm x 600 mm center to center or as directed by the Architect should be covered with 6 mm th bwp (15710) ply Board of approved make finished by 1.0 mm thick laminate of approved make on both side including the glazing part made with 8 mm the clear glass with eatching as per bank and a door of size (3-0x7-0) induding supply and fixing of Door Handle Door Closer, Mortis Lock, Door sopper hardware all complete with as per drawing. Low height Semi glazed Partition In Between working counter & Banking halk:- Providing and foxing low height semi glazed partition up to 4-0 height between working counter as per drawing made out of aluminium hollow sections of 50mm x 50mm size 1.5mm thick of JINDAL/INDAL make as intemal framed structure placed horizontally & vertically in 880 mm x 550 mm/600mm x 600 mm center to center or as directed by the Architect with imm Th bwp(18710) ply Board of approved make finished by 1.0 mm thick laminate of approved make on both side up to 3-0 height above it provide 12mm Th Glass with atching. Wicket.ante with all fiting as ner drawing Cash cabin Side & Rear Partition Providing and fixing semi glazed partitions/solid Partition in cash & beside of cash cabin up to 70 height, side & rear partiten made out of aluminium hollow sections of 50mm x 50mm size 1.5mm thick of JINDAL/INDAL make as internal framed structure placed horizontally & vertically in 580 mm x 550 mm/600mm x 600 mm center to center or as directed by the Architect should be covered with mm th bwp(18710) ply Buard of approved make finished by 1.0 mm thick laminate of approved make on both side including the glazing part made with 8 mm the clear glass of Modilsaintgobin and a door of size (2-6x7-0) including supply and foxing of Door Handle, Door Closer, Door Lock, Door stopper, Night Latch,hardware all complete with as per drawing (Provision for a hole of size 6x4 with 6x6 tray with teak wood beading and hinge neatly finished should be provided for the cheque passing) Cash Cabin front Partition Providing and fring cash cabin front partition above the Cash counter tranjection top with seasoned hard wood frame and 12mm thick clear glass of Modilsaintgobin from 3-10 to 6-6 height above it 5 wide partition with laminats both side complete with as per drawing and instructions of the Architect/Bank. Cash Counter-Providing and thing cash counter in two tier with 2-6 wide working counter at 2-6 height and 1-0 wide service counter at 3-10 height made with 19 mm th bwp(8710) ply board of approved make finished with 1.0mm thick laminate of approved make and shade including the supply and thing of Keyboard of EBCO, CPU Stand EBCO 3nes drawer, Uper drawer divided into 4/6 port as per bank for sepration of note godrej Link lock foot rest provision of hole for wire with wire manager. The inner side of the counter shall be painted with minimum 2 coats of premium 1st quality paint as per drawing and instructions of the Architect/Bank. Working Counter: Providing and fing 2-6 wide working counter at 2-6 height made with 19 mm th bwp(5710) ply board of approved make finished with 1.0mm thick laminate of approved make and shade including the supply and thing of keyboard of EBCO,CPU stand EBCO provision of hole for wire with wremanager Inos drawer with lock of godrej make, foot rest, The inner side of the counter shall be painted with minimum 2 coats of premium tet quality paint as per drawing and instructions of the Architect Bank Glass in front of working Counter Providing and fixing 12MM Th Glass with eatching in front of counter top & Between counter made of modisantgobin with support of 3x3 column and beading above the Low height counter of 1-6 height after the provision of 2 gap above the counter as per drawing and instructions of Architect/Bank Managers Table Providing and fixing Managers Table size-6-0x30x26 made with 18 mm th bwp(15710) Ply board of approved make finished with 1.0mm thick laminate of approved make and shade including the supply and fixing of sliding keyboard of EBCO, CPU stand EBCO, provision of hole for wire with wire manager Inos drawer with lock of godrej Link make, foot rest. The inner side of the counter shall be painted with minimum 2 coats of premium tet quality paint as per drawing and instructions of the Architect/Bank, Officers Table Providing and fixing Officers/Cleark Table size-4-6x2-6x2-6 made with 19 mm th bwp08710) Ply beard of approved make finished with 1.0mm thick laminate of approved make and shade including the supply and foxing of sliding keyboard of EBCO, CPU stand EBCO, provision of hole for wire with wire manager 3nos drawer with lock of godrej Link make, foot rest, The inner side of the counter shall be pairited with minimum 2 coats of premium 1st quality paint as per drawing and instructions of the ArchitectBank Officers Table Providing and fixing Officers Cleark Table size-4-0x2-6x2-6 made with 19 mm th bwp(15710) Ply beard of approved make finished with 1.0mm thick laminate of approved make and shade induding the supply and thing of sliding keyboard of EBCO, CPU stand EBCO, provision of hole for wire with wire manager, 3nos drawer with lock of godrejiLink make, foot rest. The inner side of the counter shall be painted with minimum 2 coats of premium 1st quality paint as per drawing and instructions of the ArchitectBank. Officers Table; Providing and fixing Officers/Cleark Table size-3-8x2-6x2-6 made with 19 mm th hwp(15710) Ply board of approved make finished with 1.0mm thick laminate of approved make and shade including the supply and fixing of sliding keyboard of EBCO, CPU stand EBCO, provision of hole for wire with wire manager, 3nos drawer with lock of godre/Link make, foot rest, The inner side of the counter shall be painted with minimum 2 coats of premium 1st quality paint es per drawing and instructions of the Architect/Bank Low height and Futi helghit side storage: Providing and fioing in position Low height side Back storage up to 2-8 height & 1-6 depth as per drawing using 19mmTh bwp ply board of finished with Imm Th laminates as shown in the drawing and all other sides shall be finished with white enamel paint. The storage unit shall be provided with handles (3.5 finish) as per direction of Architect Bank. All exposed plyboard surface to be finaned with 1mm Th laminates of approve make and shade, and all exposed edge of ply board to have 1x1/4 T.W lipping All exposed T.W section to be melamined and internal surface to have with enamel paint item to include af necessary hardwars and fitting in 6.8 finish, Godrej Link multipurpose lock including magnetic ball Notice Board-Providing and feng notice board of size (2-6 x 3-6) made of 19mm thick BWP Ply covered with velvet cloth of approved make and shade as per drawing and instruction of the Architect/Bank Woting Desk Providing and fixing writing desk made with 12 mm ith glass writing top and gless partition for leaflet. Chegive droop box: Providing and fong cheque drop bos shall be made with 19mm th bwp ply finished with 1.0mm th laminate including incks & all hardware as per drawings and instractione of the Architect Bank Column Paneling:: Providing and fring Column paneling in with aluminium hollow sections of 50mm x 50mm size 1.5mm thick of JINDAL INDAL make as internal framed structure placed horizontally & vertically in 550 mm x 850 mm/600mm x 600 mm center to center or as directed by the Architect with 6mm Th bwp(19710) ply with 1.0 mm thick laminate. ACP Wall Paneling/Boxing for rolling shutter- Providing and foing ACP wall panelling on 2x1 Aluminum section Placing 2 C/C & boxing for rolling shutter using 4mm thick ACP with aluminium foil thickness of 0.50mm on both sids uroboard, alucobond alucopanal make. The panel should bepf PVDF paints coating of colour shade as per bank standard and size to with stand for at least 15 years for feeding (warranty certificate from the manufacture is to given for 15 years against feeding chalking & delamilations etc) and to be properly fixed to the plywood backing The rete should inlcude all material, labor wastage et Complete payment will be made on Sq ft basis of actual finished area Electrical DB/Panel boy cover finished in Laminates: Electrical DB/Panel box cover with shutter to be provided in 19mm Th BWP (IS707) ply & at appropriate location away hom wall surface with enough gap between the wall and the ply for passing of main cables of wires etc with necessary support buttons, all exposed/external surface to be finished in 1mm Th laminate of equivalent make frosty white and internal finished with 0.8mm Th balancing white or off-white laminate Rate shall be inclusive of providing & foing aluminium louvers of full length other customeed or ready made or as directed by Architect finished in spproved shade power coatting for ventilation & necessary hardware fitting and fixtures etc. All complete as per drawing and instruction of the Architect Rate shall be inclusive of provision of 55 D type handles 150mm long and the shutter shall be provided with SS Chairs so as to prevent the chipping of saminates Roller Venetian blinds: Providing and fixing Roller venetan binds of approved shade off white/According to bank. The rate shall include necessary ecotchguard bestment on both side. The work to be completed as par specification and approval of the Architect Aluminum mesh: Providing and foxing hexagonal Aluminum mesh above Cash casin Total Sectionl- BOQ FOR INTERIOR WORK IN ATM Section INTERIOR FURNISHING WORK IN ATM DESCRIPTION Entrance Door Providing & freing 12mm Thtoughned glass door of approved make with atching and fired on patch fiting Item to include floor springs, lock 12 long S.S. handle all necessery herdeware of stainless steel finish required. Glazed partition between Machine Providing and fixing of glazed partion with 12mm thick toughned/ Eaching glass up to 4-6 height fitted with heavy duty SS patch fittings at the interval of mimimum 2 interval at bottom and sides as per site condition.. Grid False ceiling-Providing & fixing Saint Gobain /Lafarge/KCS false ceiling 600x600x15 mm with Aluminum frame work as specified by above Co. with Aluminum suspenders wherever required. Making necessary frame work for A.C ducting if any and necessary cutouts for diffusers and light fittings, taping & finishing to proper line & level including making grooves and trap doors for A.C unit in 18mm Th BWP(IS710) Grade plywood with stainless steel hinges & locks with moulding 1x1 for edge including finishing with white plastic Emulision paint etc. ACP Wall Paneling/Boxing for rolling shutter:- Providing and fixing ACP wall panelling on 2x1 Aluminum section Placing 2 C/C & boxing for rolling shutter using 4mm thick ACP with aluminium foil thickness of 0.50mm on both side uroboard, alucobond, alucopanel make. The panel should bepf PVDF paints coating of colour shade as per bank standard and size to with stand for at least 15 years for feeding (warranty certificate from the manufacture is to given for 15 years against feeding,chalking & delamilations etc) and to be properly fixed to the plywood backing. The rate should inicude all material, labor, wastage etc. Complete payment will be made on Sq ft basis of actual finished area.