|
| 1 | A. 132KV TRANSMISSION LINE |
| 2 | Towers |
| 3 | i) C+6 (C-type Tower) (2 to 30 Degree) |
| 4 | ii) D+6 (D-Type Tower) (30 to 60 Degree) |
| 5 | Galvanised Bolts & Nuts with spring washers |
| 6 | Templates adjustable for |
| 7 | i) C-Type Tower (0to 30 Degree) |
| 8 | ii) D-Type Towers( 30to 60 Degree) |
| 9 | Tower accessories |
| 10 | i) Pipe Earthing |
| 11 | ii) counterpoise earthing |
| 12 | iii) Danger Plate |
| 13 | iv) Number Plate |
| 14 | v) Phase Plate(Set of Three) |
| 15 | vi) Anti climbing device(with Barbed wire) |
| 16 | Conductor ACSR \"Panther\" |
| 17 | Conductor accessories |
| 18 | i) Compression Joint |
| 19 | ii) Repair Sleeve |
| 20 | iii) Vibration Damper |
| 21 | iv) P.G. Clamp |
| 22 | Earth / Ground wire(7/3.55cm) |
| 23 | Earthwire/Ground wire accessories |
| 24 | i) Compression Joint |
| 25 | ii) Tension Clamp |
| 26 | iii) Vibration Damper |
| 27 | iv) Repair Sleeve |
| 28 | v) Earth Bond |
| 29 | Disc Insulator |
| 30 | i) 120KN |
| 31 | Hardware for Insulator Strings |
| 32 | i)Single Tension fittings |
| 33 | ii)Double Tension fittings |
| 34 | Tool & Plants |
| 35 | i)Hydraulic Compressor |
| 36 | ii)Hand Winch with 150m Rope 12 |
| 37 | iii) Come along clamp for conductor |
| 38 | iv) Come along clamp for earthwire |
| 39 | v) Pulley/Roller Heavy duty for conductor |
| 40 | vi) Pulley/Roller Heavy duty for earthwire |
| 41 | vii) Die set for panther |
| 42 | viii) Die set for earthwire |
| 43 | ix) Turn table 5 ton capacity with foot breaking arrangement |
| 44 | B. 132KV LINE BAY AT RENGPANG |
| 45 | 145KV, 12.5KA, 800A SF6 Gas Circuit Breakers, single phase, Auto reclosing |
| 46 | Motor Operated145 KV, 800A, 12.5KA Out Door Isolators |
| 47 | i)with E/Blade |
| 48 | ii)without E/Blade |
| 49 | iii) Insulators for above isolators |
| 50 | 120 KV, 10KALA with Insulating Base & Surge Counters |
| 51 | 132 KV Line CT |
| 52 | 132 KV CVT |
| 53 | 132KV Bus Post Insulator |
| 54 | 132KV C.R Panels (Line) |
| 55 | Supply of Power Cables for 1 Bay |
| 56 | i) 3.5C x 35 sq.mm |
| 57 | ii) 4C x 6 sq.mm |
| 58 | Supply of Control Cables for 1 Bay |
| 59 | i) 5C x 2.5 sq.mm |
| 60 | ii) 7C x 2.5 sq.mm |
| 61 | iii) 10C x 2.5 sq.mm |
| 62 | iv) 14C x 2.5 sq.mm |
| 63 | v) 19C x 2.5 sq.mm |
| 64 | ACSR Bersimis Conductor for Bus (inclusive of existing Bus) |
| 65 | Shielding Wre |
| 66 | Disc Insulator 120 KN |
| 67 | Single Tension hardware for insulator string |
| 68 | Clamps & Connectors suitable for ACSR Bersimis |
| 69 | Galvanized Steel Structure for 1 Bay |
| 70 | SWITCHYARD & COMPOUND LIGHTING |
| 71 | i) Lighting DB |
| 72 | ii) 250W SON Lamps with Fittings on Poles |
| 73 | iii) 250W SON Lamps on Switchyard structure |
| 74 | FIRE-FIGHTING EQUIPMENT |
| 75 | i) 50Lb, Dry Powder Type for switchyard |
| 76 | ii) CO2, 50Lb Capacity extinguisher wall mounted for control room |
| 77 | D.C Equipments:- |
| 78 | i) 110V, 250AH Battery with Accessories(Maint. free) |
| 79 | ii) 110V, 250AH Battery Charger Float Cum Boost. |
| 80 | MRI for Energy Meter |
| 81 | PLCC equipments for 1 Bay at Rengpang |
| 82 | i) Line traps with connecting clamps |
| 83 | ii) Coupling capacitor I/C electromagnetic voltage measuring device without pedestal stand and clamps phase to phase |
| 84 | iii) PLCC terminal |
| 85 | iv) Coupling device(for phase to phase coupling) |
| 86 | v) VFT equipment teleprotection |
| 87 | vi) PAX |
| 88 | vii) H.F. cables for 1 bay |
| 89 | viii) Telephone set without priority |
| 90 | ix) 48V,200AH Battery |
| 91 | x) Battery charger for above Battery |
| 92 | G.I. Flat (50x6mm) |
| 93 | G.I. Flat (75x10mm) |