|
| 1 | Supplying of man mazdoor at site of work including necessary tools etc..,as required and as directed by Engineer-In-Charge ,complete. |
| 2 | Providing special repairs to the ceiling of roof slab with anticorrosive coating Nito Zinc epoxy primer or equivalent to the exposed reinforcement 1 Kg / 6 m2 and application of bonding agent Nitobond EP or equivalent for bonding the existing cementitious surface at 1 Kg / 2-3 m2 and filling the patches with polymer mortar Nitobond AR or equivalent mixed with CM 1:3 at 10 lts / 50 Kg cement after that chemical curing with concure WB or equivalent @ 1 lt. to area of 5 m2 including necessary scaffolding, cleaning the exposed reinforcement area etc., as required and as directed by the Engineer-in-Charge complete. All labour and materials. |
| 3 | Manufacture, supply ,& delivery of HDPE pipes 315mm outer dia of PE100 grade 6kgf/sqcm pressure conforming to IS 14333-2000 for using underground drainage and sewerage systems including fixing ,transportation to anywhere in A.P, excluding all taxes (supply up to 90 mm drain coil & above 90mm dia. straight length) etc., as required and as directed by the Engineer-in-Charge complete. All labour and materials. |
| 4 | Dismantling brick or stone masonry in lime (or) C.M and stacking within a lead of 50 m the useful materials and removing the debris etc., as required and as directed by Engineer-in -charge complete. |
| 5 | Dismantling reinforced cement concrete and removing the debris within a lead of 50 m including cutting reinforcement bars and stacking the useful materials including handing over the bars to storesetc., as required and as directed by the Engineer-in-Charge complete. |
| 6 | Transportation of debris up to lead of 10km including stacking, loading/unloading , levelling etc.,as required and as directed by Engineer-In-Charge.All labour and materials. |
| 7 | Supply of JCB (3D) Earth mover for excavation / levelling and removing debris / earth etc., including fuel, operator charges and incidental charges etc., as required and as directed by the Engineer-in-charge complete. All Labour and equipment, spares etc., complete. (Payment will be made for number of hours worked at site only) |
| 8 | Preparation of sub-grade to the specified grade and camber, compaction with vibratory roller (80-100 KN static weight), making good the undulations including excavating earth upto a depth of 22.5 cm and disposal of surplus earth to a lead of 50 m including hire and operational charges of roller, tools, plant etc.,as required and as directed by the Engineer-in-Chargecomplete. All labour and materials |
| 9 | Supplying and spreading of gravel or moorum for sub-base in layers not exceeding 150 mm compacted thickness, compaction with vibratory roller 80-100 KN capacity to the required density as per IRC at optimum moisture content including hire of roller, operational charges, tools and plant, watering etc., as required and as directed by the Engineer-in Charge complete.All labour and materials.(Payment will be made for the quantity of finished work based on levels only) |
| 10 | Providing Water Bound Macadam sub base course conforming to IRC standards or MOST specification with grading 2 granite metal 63 to 45 mm, graded granite metal screenings 13.2 mm size and binding material moorum or gravel including screening, sorting, spreading to template and consolidation with vibratory roller (80 KN - 100 KN capacity) copious watering etc.,as required and as directed by the Engineer-in-chargecomplete. All labour and materials. |
| 11 | Providing Water Bound Macadam base or surface course conforming to IRC standards or MOST specification with grading 3 granite metal 53 to 22.4 mm, graded granite metal screenings 11.2 mm size and binding material moorum or gravel including screening, sorting, spreading to template and consolidation with vibratory roller (80 KN - 100 KN), copious watering etc.,as required and asdirected by the Engineer-in Chargecomplete. All labour and materials. |
| 12 | Providing,laying, spreading and compacting graded stone aggregate to Wet Mix Macadam as per specification including premixing the material with water at OMC, Mechanical mix plant ,carraige of mixed material by tipper to site ,laying in uniform layer with paver in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired denisty etc.., as required and as directed by Engineer-in-charge complete. All labour and materials. |
| 13 | Providing Dry Lean Cement concrete 1:3:6 nominal mix (using 220 kg. of cement per m3 of finished concrete) using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position and spreading in layers, compaction with power roller, finishing, curing etc., as required and as directed by the Engineer-in-charge complete. All labour and materials (W/C ratio shall be finalized by trial rolling at field, well in advance). |
| 14 | Plain cement concrete M 30 mix using 20mm graded grainte metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position , tamping or vibrating , finishing ,curing etc.., including necessary shutteringetc.., as required and as directed by Engineer-in-charge complete.All labour and materials. |
| 15 | Earthwork in Hard/Dense soil excavation in foundation trenches or drains not exceeding 1.5 m in width and for wells, manholes and the like not exceeding 10 m2 on plan including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metc., as required and as directed by the Engineer-in- charge complete. |
| 16 | Supplying and filling in plinth with sand under floors including watering, ramming, consolidating and dressing etc., as required and as directed by the Engineer-in Charge complete. All labour and materials. |
| 17 | Plain cement concrete 1:4:8 nominal mix (using 170 kg of cement per m3 of finished concrete) using 40 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping, finishing, curing etc., as required and as directed by the Engineer-in Charge complete. All labour and materials. |
| 18 | R.C.C. M 20 mix in column footings, strip footings, raft foundations, plinth beams, bed blocks, cellular raft, plinth courses and similar types of works etc., using 20mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping and/or vibrating, finishing, curing, form work, cost of super plasticizer etc., as required and as directed by the Engineer-in Charge complete. All labour and materials, but excluding cost of reinforcement. |
| 19 | R.C.C. M 20 mixin all types of beams, lintels, columns, square or circular or rectangular etc., using 20mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, vibrating, finishing, curing, cost of super plasticizer etc., including necessary shuttering as required and as directed by the Engineer-in-charge complete. All labour and materials, but excluding cost of reinforcement. |
| 20 | Supplying, placing and maintaining in position ribbed tor steel or mild steel reinforcing bars varying from 6mm to 40 mm dia. including straightening, cutting, bending, tying grills with annealed steel binding wire of 18 guage (1.22mm dia.) including cost of binding wire, transportation to site etc., as required and as directed by the Engineer-in Charge,complete. All labour and materials. |
| 21 | Providing random rubble masonry in C.M 1:5 in plinth and foundations including necessary dressed stones at corners and junctions, curing etc., as required and as directed by the Engineer-in Charge, complete. All labour and materials. |
| 22 | Providing brick work in C.M 1:5 in super structure using approved quality standard bricks of class designation 35 including scaffolding, lift, curing etc.,as required and as directed by the Engineer-in Charge complete. All labour and materials. |
| 23 | Plastering with CM 1:5, 12 mm thick including raking out joints, cleaning the surface, curing etc.,as required and as directed by the Engineer-in Charge complete. All labour and materials. |
| 24 | Painting priming coat to walls and ceiling surface with approved liquid cement primer including cleaning the surface, scraping the surface and washing with soap water etc.,as required as directed by the Engineer-in Charge complete. All labour and materials. |
| 25 | Providing Painting two coats with weather coat smooth exterior paint or equivalent of approved quality, colour, and shade etc., on Plastered / Concrete surface including cleaning the surface, watering etc., as required as directed by the Engineer-in Charge,complete. All labour and materials. |
| 26 | Providing and fixing G.I. tubular gate (double shutters) with 40 mm dia. G.I. pipes and specials including diagonal pipes and frame welded to approved weld mesh of 75 x 25mm size(3.15 mm x 5 mm dia.) including painting with one priming coat and two coats of synthetic enamel paint of approved colour and shade ( total three coats) etc., with locking arrangements, necessary MS. flats, iron pintels etc., including fixing in CC bed blocks as directed with 12 mm dia. bolts and nuts, washers etc., as requiredas directed by the Engineer-in Charge complete. All labour and materials. |
| 27 | Supplying and fixing dressed double polished cuddapah slabs for cooking platforms and similar type of works etc., fixing with CM 1:3 etc., including black oxide powder, drilling holes etc.,as required as directed by the Engineer-in Charge, complete. All labour and materials. |
| 28 | Dismantling lime or cement plastering from walls and raking out joints upto 20mm deep and cleaning the surface etc., including disposing the debris within a lead of 50 m etc.,as required as directed by the Engineer-in Charge complete. |
| 29 | Plastering with CM 1:420mm thick including raking out joints, cleaning the surface, curing etc., as required as directed by the Engineer-in Charge, complete. All labour and materials. |
| 30 | Providing mural arts decorative theme on walls for giving visual feel to the visitors , tourists etc including overall through cleaning of old surface of walls ,painting one primary coat using first quality cement primary exterior variety and two coats of acryic emulsion medium APEX ultima protek,weather proof exterior paintings as per directions of concemed officals of VPA and as per approved design etc.., including cost of all materials ,tools, artists /painter charges ,labour charges ,scaffolding etc and conveyance of all materials to site etc..,as required and as directed by Engineer-in-charge,complete. All labour and materials. |