|
| 1 | Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for fdn, etc or for shafts, wells, cesspits, manholes, pierholes etc and n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in hard / dense soil complete |
| 2 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm |
| 3 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 4 | M&L for cement concrete type D2 1:4:8 (using 40mm graded aggregates) in foundation, filling and mass concrete complete |
| 5 | M&L for Brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete |
| 6 | M&L for 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork using PCC type B0 1:2:4 (12,5mm graded aggregates) applied with hot blown bitumen @ 2 Kg/sqm over DPC complete |
| 7 | M&L for TMT bar 10mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete |
| 8 | -Ditto- as above but 8 to 10mm dia as in stirrups complete |
| 9 | M&L for formwork to chajja, roof beams, lintels and soffits of roof projections etc and similar items including edges |
| 10 | M&L for reinforced cement concrete design mix M-25 (using 20mm graded aggregate) forroof beams and lintels complete |
| 11 | M&L for 10mm thick rendering in CM 1:6 over fair faces of brick / conc wall surfaces and finishing surfaces even and fair complete. |
| 12 | All as above but 15mm thick in CM 1:4 for other than fair faces of external wall surfaces and sponge finished complete. |
| 13 | M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in floor subbase complete |
| 14 | M & L for 50mm thick cement concrete type C2 (1:3:6) using 40mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 15 | M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed. |
| 16 | M& L for preparation of newly plastered surfaces of wall and applying two coat of acrylic emulsion over a coat of alkali resistant primer of same makeover one coat of white wash complete all as specified and directed for external wallsNote : Arcylic emulsion of BERGER / ASIAN PAINT/DULUX etc with minimum warranty period of 05 years to be used with primer of the same make |
| 17 | M&L provinding cement concrete (1:2:4) B-1 as in window cill, copings etc and like complete all as specified. |
| 18 | M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete as directed. |
| 19 | S&F gusset plates, angle, cleats etc incl necessary welding drilling for fixing confirming to Gde E-250, Fe-410, Quality-Acomplete all as specified and directed. |
| 20 | M&L for preparation of new or previously untreated surfaces of steel of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paintover a coat of red oxide primer complete all as specified and directed. |
| 21 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick ofcolour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or \"J\" / \"L\"hooks complete all as specified and directed. |
| 22 | All as per item No. 08 here-in-before but plain sheet as in ridges, eves gutters, facia board inclusive of forming half round channel etc complete all as specified and directed. |
| 23 | S & F framed work such as grills , gratings etc. with ends of bars shouldered and or rebated or forged into spikes , framed guard bars etc confirming to Fe - 290 - Gde - E - 165 complete all as specified . |
| 24 | S&F in repair 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete |
