|
| 1 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 2 | Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). Size 300mm x 450mm |
| 3 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed |
| 4 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm |
| 5 | Applying Birla /JK white cement based putty over cement plaster surface for making even surface |
| 6 | Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect: New Work. |
| 7 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including prepration of base with primer putty lippy complete in all respect. |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 9 | Centering and Shuttering with plywood or steel sheetsincluding strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. Columns, pillars, posts and struts etc. |
| 10 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 11 | Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in : ement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 12 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 13 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 14 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :20mm thick . |
| 15 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 20mm nominal size |
| 16 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). 32mm nominal size |
| 17 | Door bend (top Side) 110 mm dia |
| 18 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: Long body, 15mm nominal bore weight not less than690 gm |
| 19 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : 25mm nominal bore. |
| 20 | P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required 5 step fan regulator 2 Module |
| 21 | P & L in position of cement concrete M-15 grade nominal mix. |
| 22 | Supplying & Fixing Machine cut fine dressed red pink sand 1:4 including painting |
| 23 | Earth work in excavation by mechnical means all kind of soil |
| 24 | Construction of Chamber in all type of soil with 300 thick masonary size 450 x 450 depth upto 0.5m Cement Concrete with frame |
| 25 | P/F granite slab mirror polished and machine cut in wall pillow tep shelves sills. |
| 26 | P and Fixing steel glazed door window ventilator shutters of standard rolled steel section |
| 27 | Kota Stone slab 25mm thick in rises of step skirting for each slab 2000cm to 5000 cm square |
| 28 | P & L & jointing RCC class NP-2 Non Pressure pipe, 300m dia internal |
| 29 | Construction of man hole in all type of soil inner size 90 x 60 cm 450m thick im Cm 1:6 10cm thick cement 1:5:10 in foundation: Depth upto 0.5m |
| 30 | P &L in position of C.C. including curing compaction etc. Complete in upto plinth level M-10 grade nominal mix |
| 31 | P & F flash valve(I.S. 1758 Mark) for WC of approved quality make 15m nominal base |
| 32 | 190m shower |
| 33 | Cleaning single welding uprooting of vegatation grass etc. |
| 34 | 180cm high fencing with angle iron part 55 x 55x 6 placed at every 3 mtr apart 45cm in grand. |
| 35 | P & F Cow Catches made R-S joint angle Channel MS novel etc. |
| 36 | Anodised aluminium (anodised transparent 81 dyed to required shade according to IS 1868. |
| 37 | For Shutters built up standard tubular section of openable door window & ventilator Please Enable Macros to View BoQ information |
