Tender For Constr Of Boundary / Security Wall Office Complex At Aps Records And Aps Wing, Kamptee, Provision Of Parking Shed Between Block No 197 & 198, 199 & 200, 201, 202 & 2023, Block No. 157 & 158 At Ncc Ota Kamptee, Provn Of Bathroom Complex With 05
Tender Value
46.37 Lakhs
Estimated cost
Bid Submission
29 Nov 2025
0 days left
EMD
92740
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kamptee → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
CONSTR OF BOUNDARY / SECURITY WALL OFFICE COMPLEX AT APS RECORDS AND APS WING, KAMPTEE, PROVISION OF PARKING SHED BETWEEN BLOCK NO 197 & 198, 199 & 200, 201, 202 & 2023, BLOCK NO. 157 & 158 AT NCC OTA KAMPTEE, PROVN OF BATHROOM COMPLEX WITH 05 X TOILESTS AND URINALS WITH WASH BASINS AND MIRRORS, OH TANK AND WATER SUPPLY AT ARO NAGPUR, AND PROVN OF 02 X LEAD DOOR WITH COMPLE FITTINGS FOR X-RAY DEPT AT MH KAMPTEE UNDER GE KAMPTEE.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n exc 1.5m in deepth and 1.5m in widthand getting out in hard dense soil complete all as specifiedand directed. |
| 2 | M&L for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in foundation, mass concrete and filiings complete all as specifiedand directed. |
| 3 | M&L Form work to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specifiedand directed. |
| 4 | M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in footing, foundation,beams, plinth beams, base for columns and mass concreteetc complete all as specifiedand directed. |
| 5 | M&L Form work to side of columns and simillar work complete all as specifiedand directed. |
| 6 | M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in columns and pillars etc complete all as specifiedand directed. |
| 7 | M&L Form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and simillar work complete all as specifiedand directed. |
| 8 | M&L for providingRCC 1:1 1/2:3 type A-1 (nominal mix) (using 20mm graded stone aggregate) as in Beams, cantilevers, ressummers, lintels over 1.5m span concreteetc complete all as specifiedand directed. |
| 9 | M&L formwork to soffits of suspended slabs such as roof slabs floor slabs, landings and similar work n.exc 200mm thick. (horizontal or sloping) complete all as specifed and directed. |
| 10 | M&L for providing reinforcement cement concretetype A1 1:1.5:3(Nominal Mix) 20mm stone Aggregate as inSlabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specifiedand directed. |
| 11 | M&L Form work to chullah hoods, chajjas, troughs and similar items including edges and simillar work complete all as specifiedand directed. |
| 12 | M&L for providingRCC 1:1 1/2:3 type A-1 (nominal mix)as in chajjaetc complete all as specifiedand directed. |
| 13 | S&F milt steel TMT bars 10 mm dia and over , cut to length, bent to shape requred, including crancingbending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specifiedand directed. |
| 14 | S&F mild steel TMT bars 8 to 10 mmdia a as in stirrups, spacers and binders complete all as specifed and directed. |
| 15 | M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6complete all as specified and as directed. |
| 16 | All as per item No 15 here-in-above but half brick wall in CM 1:4 complete all as specifiedand directed. |
| 17 | M&L for Rendering 10mm thickin cement mortar 1:6 , finished even and smoothwithout using extra cement complete all as directed. |
| 18 | M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4mixed with WPC finished even and smooth without using extra cement complete all as specifed and directed. (Note : WPC will be measured & paid separately). |
| 19 | Supply only Liquid water proofing compound of approved quality. |
| 20 | M & L for preparation of new surface of wall and applying two coats of oil bound distemper over a two coat ofbirla white care puttycomplete all as specified and directed |
| 21 | M & L for 5mm thick rendering on fair faces of brick work or concrete surfaces in CM ( 1:3 ) finished even and smooth (without using extra lime or cement) on Ceilingcomplete all as specified and as directed. |
| 22 | Material and labour for applying two coats of oil bound distemper on ceiling overacoatpriming paint including preparation of new surfaces complete all as specified. |
| 23 | M&L for Anti - termite treatment to the under plinth protection, top surface of filled earth, bottom and sides of excavation at rate of 5 ltr of emulsion per square meter of surface area complete all as specified and directed by Engg- in charge |
| 24 | M&L for ATTto treating the backfill in contact with foundation at the rate of 7.5 ltr of emulsion per square meter of verticle surface complete all as specified and directed |
| 25 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering |
| 26 | M&L hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specifiedand directed. |
| 27 | M&L coloured glazed ceramic tiles 300x450x6 to 7mm thick, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed. |
| 28 | M&L joint free colored non skid ceramic tiles 6 to 7 mm thick(square or rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4 as specified and directed. |
| 29 | M & L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate)complete all as specifiedand directed. |
| 30 | M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and directed. |
| 31 | Returning, filling in, including spreading, levelling, watering and wellramming in layers not exc 25cm in hard/dense soil complete all as specifiedand directed. |
| 32 | Removing excavated material (soil)n .exc 50m and deposited where directed at a level n exc. 1.5m above the strating point complete all as specifiedand directed. |
| 33 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling and fixing in opening as per specification and directed. |
| 34 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specifiedand directed. |
| 35 | S&F 100mm long medium weight cold rolled mild steel butt hinges complete all as specifed and directed. |
| 36 | S&F Extruded Aluminium alloy handles, fabricated type anodised of 150mm long complete all as specifed and directed. |
| 37 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed of 150mm long complete all as specifed and directed. |
| 38 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specifed and directed. |
| 39 | S&F Anodized aluminium frame (powder coated ) for doors,window,ventilator with one or more rebates including joining cleat for fixing etc complete all as specifed and directed. |
| 40 | S &F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specifed and directed. |
| 41 | S&F Towel ring squarefixed to walls with chromium plated (CP) brass screws complete all as specifed and directed. |
| 42 | S&F vitreous china squatting pan Orissa pattern 450x585x255mm long with L bend and extension & integral foot rest , S or P trap including connection to trap and to flushing pipe etc complete all as specified and directed. |
| 43 | S&F in repair PVC valveless, syphonic action type, flushing cistern 10 LTRS CAPACITY, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe complete all as specifed and directed. |
| 44 | S&F 32mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in any position complete all as specifed and directed. |
| 45 | S&F Vitreous China urinals, full stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specifed and directed. |
| 46 | S&F 15 mm bore Urinal spreader of CP for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specifed and directed. |
| 47 | S&F PVC connection 15mm size, 600mm long with PTMP nuts both side complete all as specifed and directed. |
| 48 | S&F 600mmx450mm belvelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specifed and directed. |
| 49 | S&F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed of 1000 litres capacity. |
| 50 | S&F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe of size 20mm dia complete all as specifed and directed. |
| 51 | S&F Soap dish (polycarbide) fixed to walls with chromium plated (CP) brass screws complete all as specifed and directed. |
| 52 | S&F Pillar cock with 450mm long braided Hose complete all as specifed and directed. |
| 53 | S&F in repairs bib cock with wall fleange all as specified and directed |
| 54 | S&F two way bib cockwall flange complete all as specidied and directed. |
| 55 | S&F Angle cock complete all as specidied and directed. |
| 56 | S&F hand shower (health faucet) (ABS Body) with 1 mtr long easy flex Tube in chrome finish and wall hook complete all as specidied and directed. |
| 57 | S&F wall mixer with bend (for overhead shower) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specidied and directed. |
| 58 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with 20mm thick screed bed in CM 1 :6 complete all as \"specified and as directed. |
| 59 | M & L for machine cut cudappa stone slab 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed |
| 60 | S&F Vitrous china wash basin, size 505x405x185mm, under counter basin type fixedin granite ortablecomplete all as specified and directed. |
| 61 | M&L for 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed |
| 62 | S&F bottle trap 7\"\"/12\"\" as required complete all as specidied and directed. |
| 63 | M&L for 32mm dia Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm\"laid in trenches complete all as specified and directed. |
| 64 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specifed and directed. |
| 65 | M&L 15mm GI tubing \"Medium grade\" with all fiting and fixed complete to wall and celing or laid in floor complete all as specifed and directed. |
| 66 | M&L 20mm GI tubing \"Medium grade\" with all fiting and fixed complete to wall and celing or laid in floor complete all as specifed and directed. |
| 67 | S&F powder coated aluminium frame for window, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified. |
| 68 | S&F powder coated aluminium ventilator shutter, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screw etc complete all as specified. |
| 69 | S&F 4mm thick figured glass and glazing with rubber beading and aluminium glazing bar in each panel but nexc 0.5 sqm each complete all as specified and directed |
| 70 | M&L for laying 150 mm dia Salt glazed stone ware drain pipes of grade ‘A’ and jointed in cement mortar and tested on completion all as specified and as directed. |
| 71 | M&L concrete bed to drain pipe including packing under and haunching against the side of pipe after they are laid and tested. of 150mm bore complete all as specifed and directed. |
| 72 | S&F grating dome 100mm dia of PTMT (Min weight 25 gms) complete all as specifed and directed. |
| 73 | S&F Cast iron floor trap 100 mm dia , with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all a spsecified and directe. |
| 74 | S&F PVC (SWR) bends any radius of 110 mm bore complete all as specifed and directed. |
| 75 | S&F PVC (SWR) vent cowl of 110mm bore complete all as specifed and directed. |
| 76 | S&F PVC (SWR) \"S/P\" trap 110/110mm bore complete all as specified. |
| 77 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110mm bore complete all as specifed and directed. |
| 78 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel 91/1 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as orginal formation. |
| 79 | M&L for loose filling with aggregate of gauge 80 to 150mm of broken brickscomplete all as specifed and directed. |
| 80 | M&L precast cement concrete 1:2:4 type B1 (using 20mm graded aggregate)as inlandings, cover slabs (for manholes etc.) chullah hoods, chajjas, mangers, shelves and similar articles with plain faces and set in CM 1:6 . (reinforcement measured and paid sepratly)complete all as specifed and directed. |
| 81 | Cutting out bricks, forming toothing for, and bonding new into old work including value of new materials value of new materials entering old walls and jointing and pointing in brick work in CM 1:6(measured on vertical face in contact with old wall only) |
| 82 | M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed. |
| 83 | Taking down door Shutters of any description areaexc 1.50 sqm but not exc 2 sqm complete all as specified and directed. |
| 84 | S& F 105x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed |
| 85 | S&F 40 mm thick, Flush shutters, solid core construction, with partical board and plywood face panels, commercial type on both sides |
| 86 | S & F 150 mm long SS handles complete all as specified and directed |
| 87 | S & F 300 mm SS, sliding door bolt, fixed complete all as specified and directed. |
| 88 | S&F 200mm long stainless steel barrel tower bolts complete all as specified and directed. |
| 89 | S&F of2 mm thicklead linedpower coatedproofradiations sheet fix to wooden door shutter for X-Ray room as per manufacture instructions complete all as specifiedand directed. |
| 90 | Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specifiedand directed. |
| 91 | Surfacer dressing n exc 15 CM deep in any type of soiland disposal off rubish out side ofMil land Complete all as specified and directed. |
| 92 | M&L for RCC M-30 grade prestressed designer precst compound wall2100 mm from G.Lcompacted byusing vibro compacted method post and panelsize 2100x300x50 mm thick reinforcement with 4 Nos. 3 mm diaHTSWwire &Column of size 150x150x2850 mm reinforcement with 7Nos.3 mm diaHTSWwire embaded in groundcomplete all as specifiedand directed. |
| 93 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, hard and dense soil incl removal of surpluse earth out side of defence land complete all as specified and as directed. |
| 94 | M &L for Plain cement concrete in foundation filling type B-2 1:2:4 (40mm graded aggregate) and mass concrete complete all as specified and as directed. |
| 95 | Material and Labour for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including preparation of surfaces complete all as specified and directed Note:- Painting to be executed by mechanical means through authorized applicator of approved make. |
| 96 | Surface excavation not exc 30 cm deep and averaging 15 cm deep in soft/loose soil and getting out complete all as specifiedand directed. |
| 97 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 98 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tube conforming to IS 1161-1979 grade St-240 complete all as specified and directed |
| 99 | M&L Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming toFe-410W Gde E-250 quality B all as specified and directed. |
| 100 | S&Ffor 11 to 15 mm mild steel screws bolts (machine made) with hexagonal or square heads at one end and screws both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm not exc 10 cm long complete all as specifiedand directed. |
| 101 | S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plate, riveting, etc n.exc 10 kg each brackets, conforming to Fe-290. Gde E-165 .complete all as specified and directed |
| 102 | Preparation of newly steel surfaces of any description over 10 cm width or girth andapplying two coats synthetic enamel paint over a coat of red oxide primer.complete all as specified and directed |
| 103 | M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 complete all as specified and as directed. |
| 104 | Material & labour preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali resistant primer. |
| 105 | M&L hardcore broken stone or boulders of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for path complete all as specified and directed. |
| 106 | M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of hard standing complete all as specifiedand directed. |
| 107 | M&L100 mm th PCC 1:2:4 type B-2(40mm graded stone agg) as inhard standing complete all as specifiedand directed. |
| 108 | Supply only 98mm wide glass dividing strips, 3mm thick complete all as specifiedand directed. |
| 109 | M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts.grade FRLSH PVC insulated unsheathed cable with proper colour codingdrawn in including PVC concealed conduit not less than 20 mm dia with all accessoriesandFRLSH PVC insulated 1.5 Sqmm multi standard sheathed copper wire for continues earth,incl PVC conduit with necessary clamps andmodular sunken box, modular cover plate and connecting earthConnections of cable with MCB\"s or bus bar shall be done through proper size copper/brassthimbles. for the following :- (a) One light /fan point controlled by one switchNote:- Cost of 2.5 sqmm FRLSH wire provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. |
| 110 | All as per item No 110 here in before butfor one 3 pin 6 amp socket out point on the same board with other switches complete all as specified and directed. |
| 111 | All as per item No 110 here in before but with cable size 2.5 Sq mm for one 3 pin 6 amp socket out point on the independent board with other switches complete all as specified and directed. |
| 112 | All as per item No 110 here in before but with cable size 4 Sq mm for one 5 pin 16 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 4 sqmm all as specified and directed. |
| 113 | Supply and fixingmodular switch piano single pole, one way 6 Amps 1 module, complete all as specified and directed. |
| 114 | Supply and fixing modular socket outlet2/3 pin 6 Amps combined 2 module, complete all as specified and directed. |
| 115 | Supply and fixing modular switch piano flush type 16 Amps single pole one way, one module, complete all as specified and directed.Make : Havells/Cona/ Plaza/ Legrand |
| 116 | Supply and fixing modular socketmultipurpose 3 pin 6/16 Amps combined 2 module, complete all as specified and directed.. |
| 117 | Supply and fixing modular step type, 2 module electronic fan regulator heavy duty 120watts 240 volts. , complete all as specified and directed. |
| 118 | Supplying & fixing for ceiling rose PVC Polycarbonate isolated body, three terminals, complete all as specified & directed. |
| 119 | Supplying and fixing LED tube light fitting 20 watt, 4 feet (cool/warm white), surface / wall mounted with polycarbonate housing, high optically efficient polycarbonate diffuser, CRI ≥ 80, PF ≥ 0.95, lumen output≥ 2000 Lm, Colour temp 3000/6500K, luminous efficiency > 100 Lm/watt, electrical insulation class 1, operating voltage 140-270,THD <20%,Surge protection 2.5 KV, 50000 burning hrs (min), complete all as specified and directed. |
| 120 | Supplying and fixing LED tube light fitting 10 watt, 2 feet (cool/warm white), surface / wall mounted with polycarbonate housing, high optically efficient polycarbonate diffuser, CRI ≥ 80, PF ≥ 0.95, lumen output≥ 900 Lm, Colour temp 3000/6500K, luminous efficiency > 90 Lm/watt, electrical insulation class 1, operating voltage 140-270,THD <20%,Surge protection 2.5 KV, 50000 burning hrs (min), complete all as specified and directed. |
| 121 | Supply & fixing LED security lightwith aluminium pressure diecast housing, IP 65 protection, luminaire lumens > 3000 lm, power consumption < 25w and luminous efficiency > 100 lm /W, electrical insulation class 1, CRI > 80, temp range 0 to 50º C and in built electronic driver prewire upto terminal block with driver efficiency > 85%, power factor > 0.95,colour temp 6500 K Surge protection 3.5 KV, 50000 burning hrs (min) as per L70 criteria, multi stage constant current operated driver with operating voltage range 150-270V AC, fixed to pole or wall of building incuding connecting the fitting to electric source with & including twin twisted copper flexible wire of size 0.75 sqmm including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. |
| 122 | Supply and fixingExhaust Fan high quality engineering plastic of size250 mm sweep, power consumption 35 watt ,1200 RPM, Air delivery 860 cum/min, 230 V-240V, 50 HZ, noise level not more than 50 dB with approved colour and with louver shutter complete including aluminium wire net frame on the exhaust side (outer surface of wall)including electrically connecting from ceiling rose to fan connector with 0.75 sqmm flexible copper conductor three core with suitable size flexible PVC conduit complete all as specified and directed. |
| 123 | Supply and fixing electric water heater of capacity 25 ltr, storage type, Feroglas coating inner container, Made of ultra thick super cold rolled steel plates, 0.8 MPa high working pressure, Incoloy glass coated heating elements,heating element heavy duty mag-nesium anode rod, adjustable knob for temperature setting, 230 V, 50 Hz, BEE 5 Star, Energy saving high density PUF insulation, complete with all accessories such as safety valve, thermostat,NRV, 02 Nos connection pipes (Hot & Cold) etc complete all as specified and directed. |
| 124 | Supply and fixing MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with 200 amp rat-ed bus bar of suitable size plate and common neutral link all en-closed in standard steel sheet flush mounting type factory fab-ricated, powder coated complete with out MCBand with enclo-sure blank plates for unused way suitable for 12 way ISI marked all as specified and directed. |
| 125 | Supply and fixing MCB SPN 63 Amp rating 240V, 10KA \"C\" curve and current carrying ca-pacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 126 | Supply and fixing MCB SP 6 to 32 Amp rating 240V, 10KA \"C\" curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 127 | Earthing Complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burrieddirectly in groundverticallyto a depth not less than 2.5 metrebelowgroundlevelwith topedgeof theearth plate at a depth not less than 1.5 mtr belowgroundlevelearth platesurrounded from all sides by 15cmthickpacked layer ofcharcoal dust and common saltfillinginalternate layers andelectrodeconnectionby usingGI wire 4mm by meansof bolts, nuts, check nutsand washersmade of galvanised ironand thimbles and other endof theearth wire connectedto mainswitch boardprotected by galvanised iron medium grade pipe 40mm borein wall/floor/andGI Pipe 20 mm borelight grade forwatering with funnel and wiremesh PCC chamber in cementconcrete 1:3:6 typeC-2 and RCC pitcover includingnecessaryexcavation andearth work in anytype ofsoil, returningslurry approved soil and disposed of surplussoilto adistancenotexceeding 50 Mtraway all as shown inelectrical plateNo 3ofSSR 2009 ( Part-I).Notes for srl Item No. 3.06 & 3.07.(a)The unit rate shall include for GI protection pipe, GI watering pipe, wire mesh, funnel and excavation, RCC pit cover, test point, galvanised iron strip from top of earth plate upto 7.5 metres above ground level and if GI protection pipe is less than 7.5 metres, no price adjustment shall be made.(b) PCCpit shall be provided at least 50cm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipes and fittings, junction, elbow etc shall be deemed to be included in the unit rate.(c) If the testing result of earthingwork is not found satisfactory then the contractor shall do another earthing work at his own cost and nothing shall be permissible on this account.(d)Earthing work will be carried out in presence of MES representative. |
| 128 | Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr deep in soft/loose soil and getting out for taking down/laying Pipe lines of any description and in any position including forming sides and bottom surface to required level/ gradients complete all as specified and directed. |
| 129 | Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1”) dia. including Bends, increasing sockets/decreasing or double socket etc, complete all as specified and directed |
| 130 | Supply and fix Stop valves of size 25mm (1\"), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed |
| 131 | Supply and fix Double wall corrugated High Density Polymer Ethyl(HDPE) pipe for laying of electric cable of size 50 mm outer diameter and 38 mm inner diameter with IS 14930 (part 2) 2001 and 6mm thickness laid in trenches(Including cutting of roads or any others hard surfaces and making good disturbed surfaces) , wall, poles including jointer and other connected accessories complete all as specified and directed. |
| 132 | Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened,PVC bedded, galvanised steel strip or wire armoured,electric power cables ( heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq mm,4 core including testing after laid and jointed all as specified and as directed |
AI Tender Summary
Tender Timeline
Nov 15, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedNov 29, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 01, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender