|
| 1 | Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting outin soft/loose soil &spreading in surrounding area n exc 50 m distance complete, all as specified. |
| 2 | Excavating in post holes (or similar holes) each n exc0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc50m and making good surface in SOFT/LOOSE soil complete, all as specified. |
| 3 | Removal of excavated surplus spoil to a distance n. exc. 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified. |
| 4 | PCC type B-1 (1:2:4), using 20 mm graded stone aggregates as in flooring, coping, kerb around tiles & paver block and benching etc slightly rounded or chamfered angles and throating complete all as specified. |
| 5 | PCC type C-2 (1:3:6), using 40 mm graded stone aggregates as in filling & mass concrete, complete all as specified. |
| 6 | Mild steel rolled sections as in main and cross beams, hip and jack rafters, purlin where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to grade Fe-410-W Gde E-250, quality- A, complete all as specified. |
| 7 | Mild steel rolled sections as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to grade Fe-410-W Gde E-250, quality- A complete all as specified. |
| 8 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of any colour having tensile strength of 550 Mpa as in roof coverng/ cladding to wall, fixed with self tapping screws comlete all as specified. |
| 9 | Pre-painted galvalume aluminium zinc coating GI based plainsteel sheet 0.50 mm of any colour having tensile strength of 550 Mpa as in roof coverng/cladding to wall, fixed with self tapping screws etc. complete all as specified. |
| 10 | Powder coated (minimum thickness of powder coating 50 micron)aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 11 | Powder coated aluminium door shuttersfixed type without sash bar including anodised alumnium alumnium glazing snap beading, rubber neoprene packing including joining cleats &screws etc as per manufacturers instructions, complete all as specified.NOTES: (a) Each shutter shall have2 Nos. 150 mm long almn handles and 03 No. 100 mm size stainless steel/almn butt hinges & 02 Nos 150mm long tower bolts each shutter.(b) Glass and other filling materials in panels including wire cloth and almn grill shall be measured & paid for separately under respective item of BoQ.(c) For powder coated aluminum sections minimum thickness of powder coating shall be 50 micron. |
| 12 | Heavy duty top hung sliding door roller fixed with door shutter and revolving aluminium door channel / framecomplete all as specified as directed by Engg-in-charge. |
| 13 | Frosted glass 5.5mm thick ordinary quality and glazing with rubber gasketin squaresnot exc. 0.5 Sq.min each pane complete all as specified. |
| 14 | Powder coated GI snap grid frame work including suspenders/ level clip with size of grid605 mm x 605 mm for false ceiling all as specified and shown on serial page No. 186 of MES Schedule Part-II. |
| 15 | 4-6 mm thick E board, multipurpose, decorative type, cut to size and fixed in grid frame work ceiling as panels, complete. |
| 16 | 50 mm thick PCC type B-1 (1:2:4), using 20 mm graded stone aggregateseven and fair without using extra cement, complete all as specified. |
| 17 | 75 mm thick PCC type C-2 (1:3:6), using 20 mm graded stone aggregateseven and fair without using extra cement, complete all as specified. |
| 18 | 100 mm thick PCC type D-2 (1:4:8), using 40 mm graded stone aggregates as in finished even & rough, as in sub floors, complete all as specified. |
| 19 | Factory made chamfered edge cement concrete paver block glossy finish, ofwith approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of shape approved by GE, made by table vibratory method using PU mould, laid in required pattern over and including 50 mm thick compacted bed of coarse sand, compacting through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, of following grade and thick,complete. |
| 20 | 60 mm thick of M-35 Grade |
| 21 | 80 mm thick of M-30 Grade |
| 22 | Factory made PCC chequered tiles, glossy finish,ISIMarked, with grey cement & pigment, 22-25 mm thick, of size 300 mm x 300 mm, in floors, over & including 20 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry complete, all as specified. |
| 23 | Two coatsof synthetic enamel paint over & including a coat of red oxide primer over steel or iron surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified. |
| 24 | Dismantling wall / ceiling boards ( fibre pulp insulation etc) or insulations boards / slabs / blankets any thickness including aluminium / GI snap grid of any description complete, all as specified. |
| 25 | Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified |
