|
| 1 | BOOK CASE: FD-1028:Removing the existing unserviceable/Broken glassfor Shutterand S&F Plain glass 4mm thickof Make : Modi guard / Saint Gobain complete all as shown on drg,as specified andas directed by Engg in Charge. |
| 2 | Removing the existing unserviceable handle and S&F steel handle 100 mm long as per sampleapproved for \"Book Case steel\" complete all as shown on drg,as specified andas directed by Engg in Charge. |
| 3 | Removing the existing unserviceable lock and S&F newlock withkeys in duplicate of Make : Godrej/ Harrison/Link suitable for shutter of Book case steel completeall as shown on drg,as specified andas directed by Engg in Charge. |
| 4 | M7L Preparation of old painted surfaces of ‘Book case steel’ internally and externally and applying two coats of synthetic enamel paint of approvedshade complete all as specifiedandas directed by Engg in Charge.Note: The Drg No FD-237 is applicable for item Nos. 1.01 to 1.04 |
| 5 | SIDE BOARD FD-1112:Removing of old u/s top from side board and S&F new top of size 1025mmx450mm made out of 18mm thickPrelaminated Particle Board of approved shade of Make : kit ply/ Green Ply/Century Plycomplete all as shown on drg,as specified andas directed by Engg in Charge. |
| 6 | Ditto all as per Item Sl No 2.01 here in beforebut for Bottom ply of side Board.complete all as shown on drg,as specified andas directed by Engg in Charge. |
| 7 | Taking down old & u/s shutters from side board and S&F new shutters of size 675mmx 305mm made out of 18/19mm thick Prelaminated Particle Board of approved shade of Make : kit ply/ Green Ply/Century Plyincluding fixing of flat teakwood beadingall around the shutter complete all as shown on drg,as specified andas directed by Engg in Charge. |
| 8 | Removing old unsv/ brokenhinges from shutterand S&F new piano typecontinuous hinges of size 25mmas per sample approved by GE to both Door shutter complete all as shown on drg,as specified andas directed by Engg in Charge. |
| 9 | Removing old unsv/ broken handle / knobs fromdoor shutterand S&F new100 mm longhandle for shutters as per sample approved by Engg-in-Charge/ GE complete all as shown on drg,as specified andas directed by Engg in Charge. |
| 10 | Removing old unsv/ broken handle / knobs from drawers and S&F new100 mm longhandle for drawersas per sample approved by Engg-in-Charge/ GE complete all as shown on drg,as specified andas directed by Engg in Charge. |
| 11 | Remove old unsv plywood back from side board & S&F newback of size 1025mmx675 of 18mm thick Prelaminated Particle Board of approved shade of Make : kit ply/ Green Ply/Century Ply. complete all as shown on drg,as specified andas directed by Engg in Charge. |
| 12 | Removingold & u/s drawers from side board and S&F new drawers of existing shape,size as shown on drg. Bottom, sides and back of drawers shall bemade out of18mm thick plywood ISI marked BWR Gde of Make:kit ply/ Green Ply/Century Ply . Old broken Front ply of drawers shall be replace with 18mm th prelaminated particle board of Make : kit ply/ Green Ply/Century Ply. complete all as shown on drg,as specified andas directed by Engg in Charge. |
| 13 | Removing of old u/s sides from side board and S&F new sides of size 450mmx725mm made out of 18mm thickPrelaminated Particle Board of approved shade of Make : kit ply/ Green Ply/Century Plycomplete all as shown on drg,as specified andas directed by Engg in Charge. |
| 14 | Removing of u/s locks from the shutters of side board & S&F newlocks with duplicate keys of Make: Link/ Harrison / Godrej complete all as shown on drg,as specified andas directed by Engg in Charge. |
| 15 | Removing of all u/s beading from front portion of side board & S&F new 4mm thickteak wood beading of semi round shape to complete front portion of side boardcomplete all as shown on drg,as specified andas directed by Engg in Charge. |
| 16 | M&L Providingteak wood beading to all sides of side board expose to view and apply02 coats of french polish of approved shadecomplete all as shown on drg,as specified andas directed by Engg in Charge.Note: The Drg No FD-1112 is applicable for item Nos. 2.01 to 2.12 |
| 17 | CHARPOY GI NYLON NEWAR / PLY TOP (FD-220) Removal of old broken/ unsv plywood of charpoy GI pipe and S&F New 12 mm thickBWR grade ply of size 1980mmx900mm as per IS-303 approved specification of Make: Archid ply/ Century Ply/ Green ply on cleats welded on rails. S&F 02 Nos new Flat iron strip for each charpoy of size 900mmx30mmx5mm thick as per sample approved duly welded to each charpoyon two long railstogather on appropriate position of charpoy with providing newnut & bolts with washer including providingEdges of Ply should be prepared with puttyfor moisture resistance. New Flat Iron strip shall be painted with synthetic enameled paint in black colour over a coat ofred oxided primer.Corners of plywood top should be rounded off properly before fixing on charpoy complete all as shown on drg,as specified and directed by Engineer - in -Charge. |
| 18 | S&F02 Nos cleats of iron angle of size 25mmx25mmx5mm, 50mm long as per sample approved on each long rails and 02 Nos cleats on each short rails duly running welding on approprite position as directed by Engr-in-Charge including drilling hole in each cleats duly painted with synthetic enameled paint black colour complete all as shown on drg,as specified and directed by Engineer - in -Charge. |
| 19 | Removal of old broken/unsv GI elbow three wayfrom existing frame of Charpoy GI pipe and S&F new elbow GI three way 32mm bore medium grade subject to approval of sample complete ISI markedcomplete all as shown on drg,as specified and directed by Engineer - in -Charge. |
| 20 | Removal of broken/ unsv check nuts from existing frame of charpoy GI pipe and S&Fnew check nuts GI 32mm bore medium grade ISI marked subject to approval of sample complete all as shown on drg,as specified and directed by Engineer - in -Charge.Note: The Drg No FD-220 is applicable for item Nos.3.01 to 3.04 |
| 21 | SOFA SET 5 SEATER. FD-258 (1+3+1) : Removing the existing old unsvseat of sofaand S&F new seatmade out oftapestry cloth of cost not less than Rs 600.00 per metre of approved shade and foam cushion 100 mm thick ,40 density of Make : Kurl on/ sleep wel/ spring well duly upholstedcomplete all as specified and as shown on drawing and directed by Engg in Charge. |
| 22 | Removing the existing old unsvback of sofaand S&F new backmade out oftapestry cloth of cost not less than Rs 600.00 per metre of approved shade and foam cushion 100 mm ,32 density of Make : Kurl on/ sleep wel/ spring well duly upholsted on 12 mm thick commercial plywood ISI marked complete all as specified and as shown on drawing and directed by Engg in Charge. |
| 23 | M&L Polishing with french polish to thesofa set 5 seater afterpreparation ofwooden surfaces by rubbing to obtain smoothsurfaces complete along with tightening of all parts of sofa setall as specified and as directed by Engg in Charge.Note: The Drg No.FD-258 (1+3+1) is applicable for item Nos.4.01 to 4.03Note for BOQ Sr Item No. 1.01 to 4.03 :-The above items shall be executed at different unit locations, MD Accns including at BSO furniture yard all as directed by Engineer-in-Charge/GE. |
