|
| 1 | Supply and painting One coat on metallic surfaces of electrical equipment and other required surface at all levels using following paint (Asian or approved brand, colour and manufacturer) to give an even shade including preparation of the surfaces, scaffolding complete all as per specifications and as directed by the Engineer-in-Charge. (Refer Sec VI (MNC), Clause No.3). |
| 2 | Synthetic enamel Paint |
| 3 | Numbering of electrical equipments in following size and shape with synthetic enamel paint of different background colours, letter colour & size of letter as directed by Engineer in Charge (Refer Sec VI (MNC), Clause No.10.3). |
| 4 | With in 200mm dia /225 X 100mm area |
| 5 | Collecting of scrap items and shifting more than 1 km and up to a distance of 5 kms. Measurement will be done on volume basis (Refer Sec VI (MNC), Clause No.28). |
| 6 | Shifting of Electrical equipment of various sizes including loading and unloading/Shifting of electrical/telephone items from IGCAR and hand over to service centres (up to Chennai limit) or vice versa.(Refer Sec VI (MNC), Clause No.31). |
| 7 | Equipment weighing more than 100 kg and up to 500 kg within a distance of 500 mtrs. |
| 8 | Equipment weighing up to 100 kg for a distance more than 500 mtrs and up to a distance of 5 kms. |
| 9 | Clearing light jungle area, bulb weeds, grass including removal all unwanted plants, branches, twigs, wild growth etc.complete, and disposing the same 100 meters away manually or burning them without disturbing other areas etc., complete all as directed by the Engineer-in-Charge. Contractor must inform the Engineer-in-charge and prior permission shall be obtained from him for burning the wild growth. (Refer Sec VI (MNC), Clause No.7.3). |
| 10 | Clearing Heavy jungle area including removal all unwanted plants, branches, twigs, wild growth, trees and saplings of girth up to 30cm, uprooting of rank vegetation etc. complete, and disposing the same 100metres away by manually or burning them without disturbing other areas etc., complete all as directed by the EIC. The useful firewood if any, shall be cut and stacked at a place (with 100metres lead) as directed by the Engineer-in-Charge. Contractor must inform the Engineer-in-charge and prior permission shall be obtained from EIC before burning the wild growth. (Refer Sec VI (MNC), ClauseNo.7.4). |
| 11 | Supply and Installation of MS Brackets, Supports, Frame work, Clamps, Base Channels, etc. fabricated out of angle / Channel / Rods etc. The rate quoted shall include the cost of fabrication / welding, cleaning and painting/ galvanising as follows including supply of required, fasteners, nuts, washers, etc.(Refer Sec VI, Clause No.11). |
| 12 | MS fabrication 1 coat primer & 2 coats synthetic enamel paint |
| 13 | GI: MS fabrication With hot dipped galvanising. |
| 14 | Supply and Installation of following general electrical items as per the detailed specification (Refer Sec VI (MNC), Clause No.5). |
| 15 | water proof stickers of 250 x 50 mm size with messages as directed by Engineer in charge |
| 16 | Supply and installation of letters engraved Acrylic name boards with different background colours and sizes for HV/ LV panels. |
| 17 | 150 mm x 600 mm |
| 18 | 100 mm x 400 mm |
| 19 | 40 mm x 200 mm |
| 20 | Supply, fabrication and installation of the following size of Hot dip Galvanised GI Flats in Built in trenches on walls, poles, RCC Concrete and through embedded pipes as per the detailed specification. No cutting or drilling permitted after galvanisation. (Refer Sec VI, Clause No.12.9). |
| 21 | 50 X 6 mm GI flat |
| 22 | Supply, transportation, installation, testing and Commissioning of the following type of Wall (surface) mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : WT202W LED6S CW PSU S2 PC or equivalent and Lamp Type LED |
| 23 | Supply and custom assembly of single-phase extension boxes, which consist of RCBO, 16A and 6A modular sockets, switches and indicators, in accordance with the technical specifications. |
| 24 | Supply, installation, testing, and commissioning of KIRLOSKAR make, three-phase, 5HP, self-priming sewage pump with 2880 RPM motor and 80mm suction and delivery ports, including all essential accessories and fittings required for functional installation, as detailed in the specification. |
| 25 | Assisting for cleaning the spare cub-boards / Tool-racks, shifting of equipments and spares with in the sub-station, re-arranging /positioning the spares and equipments and segregation of materials, cleaning of spares, minor house keeping works as per the detailed specification. |
| 26 | Carrying out regular patrolling of cable service corridors and built-in cable trenches, which includes exterior cleaning of all inspection and access points, and the proper positioning of RCC cover slabs. (One unit of measurement shallbe calculated for eight hours of work performed by a team of one electrician and one helper) |
| 27 | Manufacturing, supplying, hoisting and fixing in position at all lifts, precast units of various patterns and sizes for precast plain solid units, slabs, exhaust fan moulds etc., in reinforced cement concrete of 1:1.5:3, using 20mm and below machine crushed graded stone aggregate and crushed stone sand including weigh batching, mechanical mixing, casting, vibrating, finishing of exposed faces, curing, necessary form work & moulds, transporting and placing at all lifts, preparation of connections, grouting with cement mortar/cement grout wherever needed excluding steel reinforcement complete all as per drawing, specification and as directed by Engineer-in-Charge. |
| 28 | Providing, straightening, decoiling wherever necessary bending, cutting, binding and fixing in position steel reinforcement at all levels TMT bars of Fe500D grade steel conforming to IS:1786 \"SAIL or VIZAG or approved equivalent make and tying with approved annealed binding wire of 1.6mm dia in all reinforced cement concrete work at all lifts, including cost of supplying and fixing the spacer/cover blocks in cement mortar 1:2 and binding wire complete all as per specification and as directed by the Engineer-in-charge at all lifts. Note: The rate shall be including the cost of reinforcement steel. The reinforcement steel will be procured from dealers with a test certificate as approved by the department. For further details please see point 7 of Section VIII, General Information for Guidance of Tenderer. |
| 29 | Identification and rectification of faults without changing accessories in various types of indoor light fixtures (Refer Sec VI (MNC), Clause No.4). |
| 30 | Fluorescent light/CFL fixtures/ incandescent lamps in labs and low bay areas |
| 31 | Attending to break down calls for following types of Motors as per the scope of work . (Refer Sec VI (MNC), Clause No.15). |
| 32 | 3 Phase Motors from 3 HP to 12.5 HP |
| 33 | Retrieval of the already laid one number 1100 Volts Grade XLPE/HRPVC insulated, Stranded Aluminium conductor cables of following sizes in built-in trenches, on walls, poles and from embedded pipes including removal of GI spacer, clamps etc and relaying the same cable in built-in trenches, on walls, poles and through embedded pipes using the retrieved spacer & clamp & supplying the shortage spacer & clamp if any as per the detailed specification. (Refer Sec VI, Clause No.7) |
| 34 | Up to 3/3.5/4 C X 25 Sq mm |
| 35 | Cleaning of Indoor Cable trenches (Refer Sec VI (MNC), Clause No.26). |
| 36 | Excavation of soil including refilling with excavated earth and disposing surplus earth at places as directed with in a lead of 10 Mtrs. and initial lift up to 1.5 Mtrs. including neat banking as per detailed specification. (Refer Sec VI, Clause No.2) |
| 37 | Operating the dewatering pump for dewatering cable trenches and related activities |
| 38 | Recording of hourly readings of all electrical parameters at 33kV CSS, NCSS-1 & NCSS-2 on 33kV, 11kV, 3.3kV and MV panels (Refer Sec VI (MNC), Clause No.20.2). ). |
