Tender For Repair/Renovation Of Sport Stadium In South Estate At Ofm.

Sharing tender

Tender For Repair/Renovation Of Sport Stadium In South Estate At Ofm.; 2 Taking downcementplaster on brick or stone walls, wall tiles , etc. including raking out joints, hacking for key, scrubbing down with water, etc. 3 Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles 4 M&L Brick work with sub class ‘B’ bricks straight or curved on plan with 1:4 cement mortar. 5 M&L for apply neat cement slurry with 3Kg of cement per sq m and rendering12mm thick cement plaster with 1:4 cement mortar on fair faces of brickwork or concrete surfaces. 6 S&F of Rolled mild steel sections as in railing, fencing framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.Fe410-gde-e-250 quality A 7 M&L for cement concrete in walls or retaining walls, any thickness, sizeor shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases).type B2 1:2:4 (40 mm graded aggregate. 8 M&L for preparation of wall surface and apply two coat of cement paint on prepared surface. 9 M&L for preparation of old iron surface and applying two coat of synthetic enamelpaint. Make- Asian, Berger, Nerolac 10 M&L dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. 11 M&L for Screed bed or bedding layer of mortar 15 mm thick for 1:6 cement mortar laying floor finishes. 12 M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 13 M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. 14 S&FNon - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and joint free and pointed in white or coloured cement to match tiles . Make; Kajaria/Johnson/Somany 15 S&F of Glazed Ceramic coloured Tiles in vertical surface 350x250x7/450x350x7 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles.Make Kajaria/johnson/Somany 16 M&L for Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. 17 S&F Steel work in tubular trusses, Railing,including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240. 18 Taking down existing chowkhats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (Without taking off shutters from the frame ) 19 S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. 20 S&F of 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required. 21 S&F of 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides. 22 S&F of 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed 23 S&F of 150 mm Mild steel pressed handles, oval type, stove enamelled black 24 S&F Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed having length of bolt 200mm 25 S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed having 100mm length of bolt 26 M&L for prepaqration of new or previously untreated surface and apply two coat of synthetic enamel on surface of any description, not otherwise descri-bed, over 10cm width or girth 27 Taking up or down steel tubing 15 mm and connections, including cleaning for refixing or removal to store 28 Cutting chases in brick wall , pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills sunshades and sutting chases for conealed conduit wiring etc, and making good, cutting not exc 10cm girth. 29 Supplying and laying 20mm outer dia of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in trenches, wall and etc with complete all necessry requirement like elbow, Tee and other. Make- Astral , Supreme, Prince 30 S&F Vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. 31 S&F Vitreous China wash basin, white, flat back, size 450x300mm excluding taps, waste, chain and plug and porcelain stopper but including brackets pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe 32 S&F 10 litre PVC valveless syphonic action type flushing cistern low level white with inlet ball valve including bracket including flush pipe, PVC connection including all joints. 33 S&Fvitreous china squatting pan Orissa pattern size 580X440 mm white with integral foot rest (excluding, flushing cistern and flush pipe) including provision of lime concrete bidding 34 S&F flush pipe of polyethylene of low or high density or pvc 32mm dia for low level cistern to pedestal pan including all joints. 35 S&F Vitreous china wash down water closet pan ( Pedestal pattern), white , fixed in repairs. 36 S&F of Seat Cover for pedestal pan, plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device. 37 S&F 32mm bore pipe ofLow density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches 38 S&F Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed 32 mm. 39 S&F of 15 mm dia Bib taps, chromium plated , cast copper alloy with crutch or butterfly handle, screwd down, screwed for iron pipe or for brass ferrule and fixed. 40 S/F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15mm. 41 S/F 15 mm dia Stop valves fancy type chromium plated , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed 42 S/F PVC connection 15 mm size with PTMT nuts of length 450 mm 43 M&L for Rough cast wired glass, 6.4mm thick and glazing with oil putty in square n exc 0.5 sqm 44 Dismantling structural steel work including doors, gates but excluding framed truss etc. 45 S&F of Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete. 46 S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified 47 Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed in soil etc.