|
| 1 | Earth work in excavation of foundations of bridges culverts, buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around :- (b) For semi-conglomerate soil of the nature of pick jumper work |
| 2 | First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. |
| 3 | earth work in excavation of foundations of bridges culverts, buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around :- (b) |
| 4 | Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding & bending and placing in position complete |
| 5 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. |
| 6 | 12.5 mm thick cement plaster 1:4 |
| 7 | Plastering on underside of ceiling 6mm thick cement plaster 1:4 |
| 8 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm |
| 9 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade A&C Slip 1 to CSR-2020 Item No. 16.10 |
| 10 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete CSR 2020 Item No. 14.127 |
| 11 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.CSR 2020 Item No. 14.72 |
| 12 | Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect CSR 2020 item no.18.29(A)For single rebate. |
| 13 | Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2202-1 1999(a) Commercial with elm or gurjanfacing on bothSides with laminated core and lipped edges:- (iii) 30mm thick CSR Item No. 17.27 a(iii) |
| 14 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (A) 300mm x 16mm CSR 2020 Item No. 17.49 (A) |
| 15 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for thesefittings (Excluding sliding bolt) ii For shutter area above 0.50 sqm |
| 16 | Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machinescrews, complete in all respects. |
| 17 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. |
| 18 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 19 | Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid inheavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fanregulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box),6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVCconnector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes(Four way PVC 1½\" deep for walls and CI 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FRcable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- 34.04(b)-1 |
| 20 | PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- (iv) Overall size 4sq.mm (Un-sheathed) |
| 21 | RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid inheavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½\" deep for walls and 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-Wiring 6Amp. Plug control comprising wall socket point |
| 22 | Carriage of Bricks |
| 23 | Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets,elbows etc.), painting with anti corrosive bitumastic paint, testing cutting, threading inside buiding complete |
| 24 | Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing cutting, threading Inside building complete. (b) 20 mm i/d |
| 25 | Providing and fixing in position 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect(ii) C.P. brass Bib cock foam flow without flange |
| 26 | Providing, fixing, and jointing G.I. Union Couplings (of approved make with the approval Engineer-in-charge) as per IS 1879 in G.I. Pipe lines complete in all respect.(a)15mm i/d G.I. Union |
| 27 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 28 | Providing and fixing jet spray with 2\"-6\" long PVC pipe. |
| 29 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. ii) Size 550 mm x 400 mm x 815 mm |
| 30 | Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. Vitreous chinaware standard white pedestal for wash hand basin. |
| 31 | Providing, fixing, and jointing G.I. Union Couplings (of approved make with the approval Engineer-in-charge) as per IS 1879 in G.I. Pipe lines complete in all respect.(b)20mm i/d G.I. Union |
| 32 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge). Size 600mmx450mm |
| 33 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 34 | Providing and fixing in position stop cock/ Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. C.P.brass 15mm Angle valve without flange. |
| 35 | Providing and fixing in position stop cock/ Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. C.P.brass 20mm concealed stop cock with flange. |
| 36 | Providing and fixing in position PVC Flexibel tube connection of approved make (to the approval of Engineer-in-charge) complete in all respects. (b) PVC tube connection of size 15mm x450mm with CP Brass nut. |
| 37 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. |
| 38 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. |
| 39 | Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineerin- charge ) fixed in with rawl plugs and C.P brass screws complete in all respect. |
| 40 | Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. iv 110mm o/d pipe of 10 Kgf. / sqcm |
| 41 | Cement concrete 1:5:10 With stone aggregate 40mm gauge mixing by manual means |
| 42 | First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth |
| 43 | Damp proof course 4cm thick of cementconcrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded |
| 44 | Cement concrete 1:2:4 ( a ) With stone ballast or shingle (i) mixing by manual means |
| 45 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 46 | Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted of welded or fgorged, framed window guards, barred iron doors stair case ,iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position |
| 47 | Providing and placing inposition on terrace ( at all floor level) HDPE water storage tanks of approved make(to the approval of Engineer-in charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipe but without fitting of base support for tank triple layer tanks. |
| 48 | RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½\" deep for walls and 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- (ii) Wiring light point |
| 49 | (i) Wiring fan point (without fan box) |
| 50 | Erection of Ceiling/ Cabin/ Exhaust fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete:- Erection of Exhaust fan with louver shutter on the wall/ window grill |
| 51 | Providing Exhaust fans of make Havells, fybros, crompton, usha or equivalent as per the satisfaction of Engineer-in-charge complete in all respect |
