Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-12-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-12-2025 |
| 2 | 28-11-2025 | REVISION OF DATES | Date | 06-12-2025 |
| 3 | 25-11-2025 | REVISION OF CRITICAL DATES | Date | 04-12-2025 |
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding including backing coat , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Demolition of cement concrete (un-reinforced) in ground floors and paving\"s not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 3 | M & L cement concrete type D2 1:4:8using 40mm graded aggrgate75mm thick as in sub floors complete all as specified and directed. |
| 4 | M & L cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in sub floors complete all as specified and directed. |
| 5 | Demolition of Concrete of any description and in any position not otherwise specifically provided for etc complete allas specified |
| 6 | M& L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bedin CM (1: 4) complete all specified and directed. |
| 7 | M&L for non-skid joint free coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bedin CM (1: 4) complete all specified and directed. |
| 8 | All as per Item No 07 above but as in skirting/dados over and including 10mm thick rendering in CM 1:3 complete all as directed. |
| 9 | M&L Glazed Ceramic Coloured Tiles, 350X250X7mm/450X350X7mm thick in size, set on Vertical Surfacesas in Dado,etc,over and including 10mm thick rendering in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed. |
| 10 | M&L for machine cut kota stone slab flooring 20-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incluidng rubbing and polishing complete including screed bed 20mm thick in cement motar 1:6 complete all as specified and directed. |
| 11 | M&L for machine cut Kota stone slab 20-22mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with 10mm thick plaster in CM 1:4 all as specified and directed. |
| 12 | M&L granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed. |
| 13 | M&L Rounding to edge of stone slabs one edge,such as in steps, cooking platform,and other similar situations complete all as specified and directed. |
| 14 | M&L for Machine cut cudappah stone slab 18-20 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as sprecified and directed. |
| 15 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 15mm dia complete all as specified and directed. |
| 16 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 20mm dia complete all as specified and directed. |
| 17 | M&L for GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors in repairs complete all as specified and directed. |
| 18 | M&L for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs complete all as specified and directed. |
| 19 | M&L for GI tubing 25 mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs complete all as specified and directed. |
| 20 | Cutting Chases pinning in making good to facing where directed |
| 21 | S & F in repairs wash down water closet (pedestal pattern) complete white withplastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 22 | S& F in repair vitreous china , squating pan of \"Orissa\" pattern, long pan, size 580 mm x 440 mm, white, with \"P\" of \"S\" Trap, Flush pipe frontt of back inlet and foot rests any pattern, including connection to trap, and to flushing pipe, anti syphonage pipe, etc. complete including making good to concrete floor complete All as specofied and as directed. |
| 23 | S&Fin repair 15 mm dia CP brass PVC connection 60 cm long including check nuts etc complete all as specified and directed |
| 24 | S & F Two way bib tap 15 mm size with wall flange complete all as specified and directed. |
| 25 | M&L in repairfor 15 mm bore bib tapchromium plated cast copper alloy with wall flange complete all as specified and directed |
| 26 | S&F for 15mm bore bib cock long nose with wall flange and aerator chromium plated completed all as specified and directed ( Make : CERA Cat Part No. F2002152) and Equivalent in Jaquar/Kohler |
| 27 | S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube andABS wall hook including making connections and fixed in position complete in all respect asspecified . |
| 28 | Dismantling ofPVC water tanks of exc 250 and n.exc500 ltr capacity and removing to store and all as specified |
| 29 | S&F rotational moulded polyethylene double layer water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified |
| 30 | S & F in repair PVC low level flushing system plastic valvewith inlet ball valve float chain and ball (of capacity 10 liters) ISI Markedincl 32mm PVC flush pipe complete all as specified and directed |
| 31 | S&F Viterous china urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screw, pointing aroung urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of supply pipe to flushing cistern, trap and waste pipe) complete All as specified and direccted. |
| 32 | S&F in repair vitreous china wash hand basin, white, 550 mm x 400 mm flat back, including providing CI brackets, CP Pillar Tap, PVC waste pipe 32mm dia, chromium plated, brass, waste coupling, iincl 32 mm dia all as specified and as directed. |
| 33 | S & F in repairs vitreous china wash basin, white, Counter top type of size 560x470x190mm excl taps, PVC conections complete all as specified and directed. Cat Part No-Cera S2030104 and Equivalent in Jaquar/Kohler. |
| 34 | S&F Pillar taps, cast copper alloy, fancy type, chromium plated, swan neck, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts screwed for iron pipe and fixed completed all as specified and directed. CERA CAT NO-F2002104 and Equivalent in Jaquar/Kohler |
| 35 | S&F Waste coupling of CP full threaded 32 mm and but suitable for urinals, WHB complete all as specified and directed by Engr-in-Charge. CERA-CAT NO-F8050101 and Equivalent in Jaquar/Kohler |
| 36 | S&F Self Closing Chromium plated angle cock pressmatic for urinals, with wall flange and 200 mm connecting pipe complete all as specified and directed. |
| 37 | S&F in repairs Urinal/ WHB waste pipe white size of 31x32x800 mm white completed all as specified and directed. (prayag-cat no-327) and Equivalent in Jaquar/Kohler |
| 38 | S & F Urinal spreader of chromium plated for fixing with 15mm dia pipe (Minimum weight 60 gms) CERA-CAT NO-F8070201 and Equivalent in Jaquar/Kohler |
| 39 | S&F angle valves fancy, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwd both ends for iron pipe or for unions and fixed (Make Prayag/hindware/Jaguar) |
| 40 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed. |
| 41 | S&F 600mmx450mm bevelled edge mirror of selected quality glass,mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers ® all as specified and directed. |
| 42 | S &F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed. |
| 43 | S&F in repair 15mm dia stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed (concealed type all as specified and directed. (Make :Prayag/ hindware/ Jaguar) |
| 44 | S & F Towel Ring of PTMT fixed with and including Chromium plated brass srews and wooden/ plastic cleats (Minimum weight 90gms) all as specified and directed. |
| 45 | S & F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed bothends for iron pipe 20 mm bore and fixed |
| 46 | S &F Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed. |
| 47 | S&F sinks with drainage boardmade of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, waste pipe and coupling and connecting union topipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed. |
| 48 | S & F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) all as specified and directed |
| 49 | S&F CP soap case all as specified and directed |
| 50 | S&Fstainless steel kitchen plate rack of 0.65 mm thick of approved make with plugs, washers, over all size 750mm x 600m complete all as specified and directed. |
| 51 | S & F Cockroach trap 101x101mm of Stainless steelwith holes for wastes pipes all as specified and directed. (Prayag Cat part no-FT-23M) and Equivalent in Jaquar/Kohler. |
| 52 | S & F Cockroach trap 101x101mm of stainless steel foe waste pipes all ass specified an directed. (Prayag cat part no- FT-21M)and Equivalent in Jaquar/Kohler |
| 53 | Demolition and breaking up drain pipes Upto 150 mm (Salt glazed ware /PVC/AC or Reinforced concrete) set in cement mortar |
| 54 | S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in walls . |
| 55 | S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in walls . |
| 56 | S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors |
| 57 | S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors |
| 58 | M&L for PVC (SWR) bends of any radius with oval and access door of 75mm dia |
| 59 | M&L for PVC (SWR) bends of any radius with oval and access door of 110mm dia |
| 60 | S &F 110mm dia of PVC (SWR) branch piece, single (Double Y) equal or unequal allwith acess dooras specified and directed. |
| 61 | S &F 110mm dia of PVC (SWR) junction single Tequal or unequal allwith access dooras specified and directed. |
| 62 | S &F 75mm dia of PVC (SWR) junction single Tequal or unequal allwith access door as specified and directed. |
| 63 | M&Lfor PVC (SWR) vent cowl of 110mm dia |
| 64 | Demolition of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards /slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-charge |
| 65 | M & L forfixed in repair of 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws all as specified and directed. |
| 66 | M&L for plain cement concrete type C1 1:3:6 (20mm graded stone aggregate) as in copings. |
| 67 | Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each |
| 68 | Taking down chowkat with shutter without taking out shutter from the frame n.exc 1.5 Sqm. |
| 69 | Taking down shutter with any description but exc 1 sq. m and n exc 2 sq. m each completed all as specified and directed. |
| 70 | S&FFactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as directed . |
| 71 | S&F factory made GIZA brand 28mm thick single extruded WPC wood (wood polymer composite) solid plain flush door shutter of required size comprising of k value 58-60 (Suspention Grade), calcium carbonate andnatural fibers and non toxic additives (maximum toxycity index of 12 for 100 gms) having minimum density of 600 kg/cum and screw withdrawl strength of 1800 N (face) and 900N (Edge), maximum compresive strength 50 N/mm2 modules of density 850N/mm2 and resistance to spread of flame of class A catagory with property of being size with necessary full body threaded star headed counter sunk SS screws all as per directed by Engr-in-Charge. |
| 72 | S & F factory made GIZA brand single extruded WPC wood (wood polymer composite) solid door frame of size 90x45mm virgin PVC polymer of K value 58.60(Suspension Grade), caklciu carbonae and natural fibers and non toxic additives (maximum toxysity index of 12 for 100 gms) having minimum density of 750 kg/cum and screw withdrawl strength of 2200 N (face) and 1100N (Edge), maximum compresive strngth 58 N/mm2 modules of density 900N/mm2 and resistance to spread of flame of class A catagory with property of being termide/ borer proof, water / moisture proof and fire resistant and fixed in position with hold fast /lugs/ss dash fastners of requirede dia and length complete all as per directed by Engr-in-Charge. (MS Holdfast/lugs or SS dash fasteners shall be measured and paid seperately. |
| 73 | Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed. |
| 74 | S F Stainless steel Butt hinges, 100 mm long mi hinge pin, anodised and fixed, type B-21 |
| 75 | S & F continuous (piano ) hinges 30mm width flaps,mild steel ,bright finish or electrogalvanised all as specified and directed. |
| 76 | S&F 150 mm long, Aluminium barrel tower bolts of extruded sectioncomplete all as specified and as directed. |
| 77 | S&F 200 mm long, aluminium barrel tower bolts of extruded Aluminium sectioncomplete all as specified and as directed. |
| 78 | S&F 150 mm size handles, Extruded aluminium alloy handles, abricated type, anodised complete all as specified and as directed. |
| 79 | S&F300 mm long aluminium anodised sliding door bolt, plate type,with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. |
| 80 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed . |
| 81 | S & F for 300 mm, MS ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed. |
| 82 | S &F of 125mm Hasp and staple, safety type, brasswith mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed. |
| 83 | S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 84 | M & L for 125mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed. |
| 85 | M & L for 105mmx60mm pressed steel frame for doors with one or more rebates incl necessary fixing lugs ,hinges,lock strike plat etc complete all as specified and directed by engr -in-charge . |
| 86 | M&L for cement concrete type C1 1:3:6 (20 mm graded aggregates) for chowkhat filling and hold fast as reqd all as specified and directed. |
| 87 | M & L for Factory made of 35 mm thick glazed and skeleton shutters made of 2nd class hard wood, open rebated and prepared to receive glass gauge edges of framing plain chamfered or rounded, fitted with cut and mitredbeads for securing glass etcfor window, ventilator shutters, etc. as specified in SSR Part I, Section 8 clause 8.24(b) and fitted to chowkhat complete all as specified and directed . |
| 88 | M & L for Factory made of 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides: supplied and fitted to chowkats complete all as specified and directed . |
| 89 | M/L for 18 mm thick Block boards, fixed in repair grade 2 quality, interior grade, commercial type,fixed with screws to timber and nails for storage almirah to the size and pattern as shown in Drg and as directed by Engr-in-charge. |
| 90 | M&L for 0.90mm thick decorative laminate type – I of surface finish (colour & pattern as approved) fixed with approved adhesive as per manufacturer’s instruction finished to approved size for working table all as directed by Engineer-in-Charge. |
| 91 | S&F Powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 92 | S&F Powder coated Anodised aluminium window and ventilator shutters, Sliding type without sash bar with 2/3 track, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified . |
| 93 | S & F Aluminium Adjustable box type louvers 4 to 6 nos for toilets and bathroom ventilators and size of 11.75mm all as specified and directed. |
| 94 | S&F 4.0 mm thick sheet glass, ordinary quality and glazing with oil putty in squaresexc 0.5 sq mtr in each pane complete all as specified and as directed. |
| 95 | S & F 4.0 mm thick sheet glass, ordinaryquality and glazing with oil putty in square n exc. 0.5 sq mtr in each pane complete all as specified and as directed. |
| 96 | S & F 4mm thick figured glass ordinary quqlity and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed. |
| 97 | S & F in repair Stainless steel wire cloth 0.63 mm nominal dia of wire and avrage width of aperture 1.40 mm and fixed withtinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 98 | M&L for I2nd class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in I st class H.W.sectional area n. exc. 6 Sqcm. |
| 99 | S & FHarrison rail 20 mm Dia(Curtain rod)s, of anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc.all as specified and directed. |
| 100 | M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in path, plinth protection etc.complete all as specified and directed. |
| 101 | Demolition of brick work or stone / bouldermasonry includingall quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed. |
| 102 | M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius old size bricks built in cement mortar 1:6 complete all as specified and directed. |
| 103 | Taking down cement plaster on brick/stone/concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc complete |
| 104 | M&L rendering 15mm thick on surface of concrete surface in CM 1:4and is to be finished even and fair with out using extra cement complete all asspecified directed |
| 105 | M&L for 5mm thick cement plaster in CM 1:3 on fair faces of concrete surfaces and finishing the surface even and fair (without using extra cement) etc. |
| 106 | M&L for 10mm thick cement plaster in CM 1:6 on fair faces of stone or concrete surfaces and finishing the surface even and fair (without using extra cement) etc. |
| 107 | Raking out joints/pointing cement mortar to random rubble or polygonal rubble uncoursed or brought up to courses |
| 108 | M&L for Keyed pointing to random or polygonal rubble, uncoursedor brought upto course CM 1:4 |
| 109 | M&L for RCC 1:2:4 (type B0) using 12.5mm graded aggregate as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. |
| 110 | M&L for Chimneybars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independentely in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 |
| 111 | M & L for Preparation of new wooden surfaces of any description having width/girth exceeding 10cm and applying two coats of synthetic enamel paint over pink primer for material and labour complete. |
| 112 | M & L for Preparation of old painted wooden surfaces of any description having width/girth exceeding 10cm and applying one coat of synthetic enamel paint for material and labour complete. |
| 113 | M & L for preperation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 114 | All as per ser item No 113 above but no surface of ceiling/soffits of slabs, chajjas all as specified and as directed by Engr-in Charge. |
| 115 | - ditto - all as per item No. 113 above but on walls. |
| 116 | M&L for 3mm thick wall care putty on wall all as specified and directed by Engr in Charge. |
| 117 | M&L for complete removal of existing treatment of walls plastered or unplastered, Washing, rubbing down and two coat of DISTEMPERING WITH 1ST QUALITY acrylic distemper(over a coat of alkali resistant primer) having VOC content less than 50 gm per ltr of approved manufacturere if reqd shed of colour complete as per manufactures specifications,all as specified and directed. |
| 118 | M&L for prepartion of newly plastered surfacestwo coat of DISTEMPERING WITH 1ST QUALITY acrylic distemper (over a coat of alkali resistant primer) having VOC content less than 50 gm per ltr of approved manufacturere if reqd shed of colour complete as per manufactures specifications, complete all as specified and directed. |
| 119 | M&L for Preparation of old plastered surfaces/un plastered surfaces including brooming down with steel wire brushing scrapping downsmokespout moulds, moss and efflorescence, salt treating oil and greasy spots etc and applying two coats of white washing on old plastered surfaces of walls all as specified. |
| 120 | All as per seritem No 119 above but on surface of on ceiling /soffits of slabs, chajjas all as specified and as directed at site. |
| 121 | M & L for prepartion of newly plastered surfaces and applying Two coats of 100% Premium acrylic emulsion paint (Weather Proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm over new surfaces complete all as specified and directed. |
| 122 | M&L for complete removal of existing treatment of walls plastered or unplastered applying Two or more coats of 100% Premium acrylic emulsion paint ( Weather Proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 123 | M&L for Preparation of new or previously un-treated surfaces of steel and applying two coat of synthetic enamel paint to steel surfaces over one coat of red oxide of any description not otherwise described over 10 cm width or girthcomplete all as specified and directed. |
| 124 | M&L for preparation of old painted steel surfaces of any description having width /girth exceeding 10cm and applying one coat of synthetic enamal paint for material and labour complete. |
| 125 | M & L for preparation of old decorated surfaces of walls plastered or unplastered incl one coats of cement based paint and making good the surface complete all as specified and directed |
| 126 | M & L for preparation of newly plastered surfaces and applying two coats of cement based paint over a coat of alkali resistant primer on wall complete all as specified and directed. |
| 127 | M&L for 75mm thick PCC in (1:2:4) type B2 using 20mm graded stone agg as in sunken floor complete all as specified and as directed |
| 128 | M&L for 25mm thick PCC in (1:2:4) type B2 using 40mm graded stone agg as in sunken floor complete all as specified and as directed |
| 129 | M&Lfor PCC 1:5:10 type E2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as directed |
| 130 | M&L for PCC 1:1½ : 3 orBitumastic Gola with 80/25 bitumen and coarse sand mixer 1:3 by weight 8cm x8cm at the junction of roofing to vertical surface as in sunken or similar work complete all as directed |
| 131 | M&L for Bitumen blown any grade applied hot, two coats to concrete bedding surface @ 1.5Kg/Sqm per coat as in sunken floor complete all as directed |
| 132 | M&L for polythene flim black 50 micron laid in sunken floor complete all as directed |
| 133 | M&L for spout of 50mm bore GI pipe and projection 450mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc for drain out logging as in sunken floor etc or similar work complete all as specified and as directed |
| 134 | M&L for 25mm thick PCC 1:2:4 type B0 using 12.5mm graded stone agg as in sunken floor mixed with water proofing comound finished fair and even complete all as specified and as directed (Note:- WPC shall be measured and paid separately) |
| 135 | Supply only integral waterproofing compound. |
| 136 | S&F in repair PVC SWR floortrap of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) . |
| 137 | S&F Gratingdoom 100mm dia of Stainless steelwith holes for waste pipes all as specified and directed. |
| 138 | S&F Grating doom 100mm dia of stainless steel all as specified and directed. |
| 139 | Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 100m or under, beyond the lead included in the rates, including, loading, unloading and stacking at the destination complete all as specified and directed. |
| 140 | Forming jambs etc, to opering ( to foregoing items), incl cutting toothing and properly bonding into work, also ffacing jointing and pointing to match existing work in CM (1:4)complete all as specified and direted. |
| 141 | Supply only integral waterproofing compound. |
| 142 | S&F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade etc complete all as specified |
| 143 | M & L cutting and existing manhole for connecting new drains making good to pipe and rendering cutting out existing bencing for and forming branch channel (half round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required 150mm dia (Note : work in foul position) |
| 144 | Demotion and and breaking up drain pipes, 150mm internal dia, (Salt glazed ware, AC or Reinforced concrete) set in cement mortar. |
| 145 | M & L for cement concrete in foundations, filling and mass concrete using type D2 1:4:8(40mm graded stone aggregate) |
| 146 | M & L for plain cement concrete type B1 1:2:4 (20mm graded stone aggregate) as in benching, finishing surfaces of concrete even and smooth without using extra cement. |
| 147 | M & l for returning, filling incl spreading levelling watering and well ramming in layers n.exc 25 cm as in hard/dense soil. |
| 148 | Removing excavated surplus soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point. |
| 149 | M&L for Reinforced concrete 150mm dia pipes, class NP2 , laid in trenches & jointed in CM 1:1 complete with collars |
| 150 | M&L Concrete bed to drain pipes 150mm dia using cement concrete 1:4:8 type D2 incl packing under and haunching against the sides of pipes after they are laid and tested in. |
| 151 | M& L Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required. |
| 152 | M&L for PCC 1:4:8 type D2 (40 mm graded aggregate ) in foundations, filling and mass concrete complete all as specified and directed. |
| 153 | M&LRCC 1 : 1.5 : 3 type A1 (using 20mm graded stone aggregate) infoundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs and mass concrete complete all as specified and directed. |
| 154 | M&LRCC 1 : 1.5 : 3 type A1 (using 20mm graded stone aggregate) inColumns, pillars, piers, posts and struts complete all as specified and directed. |
| 155 | M&LRCC 1 : 1.5 : 3 type A1 (using 20mm graded stone aggregate) inbeams, cantilevers, bressummers, lintelsover 1.5m span complete all as specified and directed. |
| 156 | M&LRCC 1 : 1.5 : 3 type A1 (using 20mm graded stone aggregate) inslab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as pecified and directed.. |
| 157 | S&F TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 158 | -Ditto- all as per item no 157.00but 6 to 8 mm as above but for stirrups complete all as specified and directed. |
| 159 | M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter flat fair finished surface of concrete complete all as specified and directed. |
| 160 | M&L form work to sides ofpillars, posts, structs, piers, columns and stanchions square, rectangular or polygonal rough finished surfaces of concrete complete all as specified and directed. |
| 161 | M&L form work for soffit and sides of floor or roof beams, beam haunchings, girderss, ressummers, linterls, cnatilevers, shelves flat items including edges rough finished surface of concrete flat complete all as specified and directed. |
| 162 | M&L form work to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or slopine) rough finished surface of concrete flat complete all as specified and directed. |
| 163 | Form work to edge of concrete flats exceeding 10cm but not exc 20cm wide complete all as specified and directed. |
| 164 | M&L for PCC 1:3:6 ,type C1 using 20mm graded stone aggregate as in solid block masonry exc.100mm thick and built in CM(1:6) all as specified and directed. |
| 165 | M&L for Rendering10mm thick in CM 1:6 to RCC surface, surface finished even and fair without using extra cement mixed with WPC all as specified and directed. |
| 166 | M&L for Preparation of roof surface and applying one coat ofbitumen primer of approved make to concrete surfaces at the rate of 1.2 kg. per sq. m per coat complete all as specified & directed. |
| 167 | M & L for roof treatment using APP based polymeric membrane, minimum weighing 3 kg / sqm and minimum 3 mm thick, reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application with side over lap75 mm and end lap minimum 100 mm and sealing over lap and joints as per manufacturer\"sinstructions complete all as specified and directed. |
| 168 | M & L for two coats of aluminium paint using 0.15 ltr / sqm each coat above the APPmembrane complete all as specified and directed. |
| 169 | M&L for hardcore of gauge n.exc 0.63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface of a broken stone or boulders complete all as specified and directed. |
| 170 | M&L for 75mm thick PCC (1:2:4), type B2, using 40mm graded stone aggregate as in plinth protection / paving, surfae finished even & smooth without using extra cementcomplete as specified and directed. |
| 171 | S&F rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered 1000 Ltr capacity, hoisted and fixed in position on new or existing foundation and makingGI tubing inlet or outlet connection. |
| 172 | S & F 20 mm Brass valves ,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed |
| 173 | S & Fbevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers ® all as specified and directed. (Make : Modigaurd, Saint Globin) |
| 174 | S&F CP soap dishfixed to wall complete all as specified and directed.(Make :Cera/hindware/Jaguar) |
| 175 | S&F CP toilet paper holder with flap, fixed towall complete all as specified and directed. (Make :Cera/hindware/Jaguar) |
| 176 | M&L for Surface dressing n.exc 15cm deep including cleaning away grass vegetation saplings shrubs , bush wood, undfgrowth roots and trees not exc 30cm girth including disposal of spoils , in Hard dense Soill soil all as directed. |
| 177 | M&L forprecast reinforced cement concrete type B1 (1:2:4) incover slabstone aggregate, with plain faces, set in cement mortar (1:6) complete all as specified and directed. |
| 178 | M&L 25mm thick Sand filling under precast concrete inter locking paver floors or in foundations including watering and consolidation complete all as specified and directed. |
| 179 | Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light pointcomplete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc as directed by Engr- in charge. |
| 180 | Taking down the sub main wiring of any dia / sq mmon teak wood batten /PVC conduit GI earth wire all as directed. |
| 181 | Taking down cearfully byunscrewingthe unserviceable DB Boxes, MCB distribution boards SP & TPN with porcelain cutouts etc all as directed. |
| 182 | Material and labour for providing point wiring with two runs of 1.5 Sqmmmulti stranded copper conductor FRLSH PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor FRLSH PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and capingwith all fittings/fixture etc andsurface typePVC box, cover plate all as specified and directed by Engr-In-Charge. |
| 183 | One light point or one fan point or bell point controlled by one switch SP one way 230 Volts. |
| 184 | One light point controlled by two way switches. |
| 185 | One Exhaust fan wall mounted/ceiling fan point controlled by one regulator/switch |
| 186 | One 3 pin socket out let 5/6 Amps on same board. |
| 187 | One socket out let 5/6 Amps on Independent board. |
| 188 | Material and labour for providing point wiring with two runs of 2.5 Sqmmmulti stranded copper conductor FRLSH PVC insulated single core 1100 volts grade & with one run of 2.5 Sqmm single core copper stranded FRLSH PVCinsulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping,ISI Marked complet for housing one 15 A Switch / socketscomplete. |
| 189 | S & F Sub Main Wiringwith FRLSH PVC Insulatedmultistranded copper conductorwires ofsize2x2.5 sq. mm + 1x2.5 sq. mm earth wire in casing caping complete as directed. |
| 190 | S & F Sub Main Wiringwith FRLSH PVC Insulatedmultistranded copper conductorwires ofsize2x4.0 sq. mm + 1x4.0 sq. mm earth wire in casing caping complete as directed. |
| 191 | Supply and fixPT switch Piano type 1 way 6A,230V ISI Marked |
| 192 | Supply and fixPT switch Piano type 1 way 16A,230V ISI Marked |
| 193 | Supply and fixSocket 6A/16A - 2/3 pin combined 2 module, flush type 230V ISI Marked |
| 194 | Supply and fixSocket, 6A - 2/3 pin combined 2 module, flush type 230V ISI Marked |
| 195 | Supply and fixing sheet metal enclouser single pole and neutral with2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete all as specified and directed. |
| 196 | M&L for ceiling rose 3 terminal size 65x20mmall as specified and directed. 230V ISI Marked |
| 197 | Supply and fixing in replacement sheet metal enclosure with DB\"s ( grouted in walls or surface mounted) double door type for MCB\"s 8 ways240 volts rated complete all as specified. |
| 198 | Supply and fixing in replacement sheet metal enclosure with DB\"s with neutral link( grouted in walls or surface mounted) double door type for MCB\"s 12 ways230 volts rated complete all as specified. |
| 199 | M&L for MCB SP 6-32 Amps B curve and electric connections with copper thimbles complete all as specified and directed by Engr-in-Charge. |
| 200 | M&L for MCB SPN 40-63 Amps B curve and electric connections with copper thimbles complete all as specified and directed by Engr-in-Charge. |
| 201 | Supply and fix in replacement high quality indoor Surface and wall mounted batten suitable for 20 Watt T8 Tube rod 4 feet long , including LED retrofit Tube rod 20 Watt T8 Tube rod 4 feet long 6000K colour temperaturewith extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integratedindustrial grade heavy duty electronic driver having THD<10%. complete with all accessories internally pre-wired and including connecting up with three core 0.5 Sqmm flexible copper conductor cable ceiling rose to fitting terminal. |
| 202 | Supply and fixing LED light fittingwith high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 203 | S & F Sub Main Wiringwith FRLSH PVC Insulatedmultistranded copper conductorwires ofsize2x6.0 sq. mm + 2x6.0 sq. mm earth wire in casing caping complete as directed. |
| 204 | M&L for providng and earthing complete with GI earth plate electrode 600 mm x 600 mm x 6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below ground level with top edge of the plate not less than 1.5 mts below normal ground level connected to GI wire 4mm diaby means of bolts,nuts,checknuts and washers of copper and connecting to earth dolly all as shown in electrical plate no. 5 of SSR Part 1 of 2009.00 and as specified or indicated and testing on completion including exaction/earth work in any type of strata PCC (1:3:6) type C1 earthin chamber, pre cast slab 50 mm thick in cement concrete (1:2:4) type B1 (reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm) funnel with wire mesh, watering pipe of 20 mm bore medium grade and lugs, inlcuding GI wire 4mm dia with GI protection pipe of 25 mm medium grade 7.5 meter long complete all as specified and directed by Engr-in-Charge |
| 205 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers Complete. |
| 206 | Material and labour for providing concealed point wiring with two runs of 1.5 Sqmmmulti stranded copper conductor FRLSH PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor FRLSH PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC conduitwith all fittings/fixture etc andModular switch/ Socket/ Regulator fixed on Concealed Metalic modular sunken box, frame and cover plate complete all as specified and directed by Engr-In-Charge.Note : The Cost of Metallic sunken box,frame and cover plate is included in quoted rates of this item. |
| 207 | One light point or one fan point or bell point controlled by one switch SP one way 230 Volts. |
| 208 | One 3 pin socket out let 5/6 Amps on same board. |
| 209 | One socket out let 5/6 Amps on Independent board. |
| 210 | Supply and fix Modular switch 1 way 6A, 1 module |
| 211 | Supply and fixmodular Socket, 6A - 2/3 pin combined 2 moduler |
| 212 | Supply & fix LED street light fitting Energy saving and environmental friendly long life LED street light fittings 35 Watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded toughened glass having IP65 protection and Impact resistance of IK07 with 10KV Built-in Surge Protection Device, Thd<10% including 20/25mm dia bracket 60cm long/ clamp 25x4 mm/ nut bolts etc. The light fittings shall be fixed on pole/bldg withcomplete all as specified. |
| 213 | Supply and fix GI Pipe Light gradewith all connected accessoriesof sizes40 mm complete all as specified and directed |
| 214 | Supply & fix and testing Stop valves 25 mm dia, screwed foriron pipe orfor unions complete all as directed by Engr-In-Charge. |
| 215 | Supply & fix and testing Stop valves50 mm dia, screwed foriron pipe orfor unions complete all as directed by Engr-In-Charge. |
| 216 | Excavation in trenches not exc 1.5 m wide andnot exc 1.5 m in depth and getting it out for laying of cable / pole etc. complete all as directed. |
| 217 | Soft/loose soil |
| 218 | Hard/dense soil |
| 219 | Soft/disintegrated rock |
| 220 | Returning/ Refilling of excavated soil including spreading levelling and well ramming in layers for any type of soil complete all as directed by Engr-In- Charge. |
| 221 | Removing the surplus soil to a distance not exceeding 50 mtrs from the starting point and depositing at a height not exceeding 1.5 m above ground level complete all as directed by Engr-In- Charge. |
| 222 | Supplying ,Laying, jointing, testing and commissioning of LT under ground cable 1100 volts grade XLPE(cross linked polythene ) armoured with galvanised round steel wire or steel strip , electric power cable heavy duty, with multi stranded aluminium conductor of size 16 sqmm 2 core, laid in trenches, ducts fix on walls/poles with proper size saddles and clamp laid under roads/path/ drain /colverts or enclosed in GI pipe/ fix complete all as specified. |
| 223 | Supplying ,Laying, jointing, testing and commissioning of LT under ground cable 1100 volts grade XLPE(cross linked polythene ) armoured with galvanised round steel wire or steel strip , electric power cable heavy duty, with multi stranded aluminium conductor of size 35sqmm 3.5 core, laid in trenches, ducts fix on walls/poles with proper size saddles and clamp laid under roads/path/ drain /colverts or enclosed in GI pipe/ fix complete all as specified. |
| 224 | Supply and fix double walled corrugated pipe class SN4 32 mm dia including laying in ground and fix along the wall as per direction of Engr-In-Charge. |
| 225 | Supply and fix MCB SPN 40 Amp, 230 volt \"C\" series complete |
| 226 | S&F MCB SP 240 volt 6 to 32 A \"C\" series complete |
| 227 | Supply and fixModular switch 1 way 16A, 1 module |
| 228 | Supply and fixmodolar Socket 6A/16A - 2/3 pin combined2 module, |
| 229 | Supply and fix Modular Bell push 6A 1 module |
| 230 | Supply and fix bell electric 230V single pole complete as directed. |
| 231 | S/F modular Fan step regulator, 120W - 2 module |
| 232 | Supply and fix Modular switch 2 way 6A, 1 module |
| 233 | S & F LED light fittingPDC housingopal diffser IP 65 Potection 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 234 | S&F angle / batten holder insulated body with back platefor batten fittings |
| 235 | Taking down ceiling fan single phase 240 V 1200 mm /1400mm sweep from the siteincl dismantling blades and removingfan and blade to wksp including disconnecting carefully and paintingwith synthetic enamel paint by sprayingincluding fillingcavities with filler two coat after cleaning all dustetc andhanging in original positionconnecting upincluding provision of cable from ceiling rose to connector of fan complete as directed. |
| 236 | Taking down the existing street light fitting and Supply & fix (inRepalcement)energy saving and environmental frindly long life LEDStreet light fitting35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete withimpact and corrosion resistant including thermalmanagement in multiple opticsIP 65/IP66 road way luminarieswith LEDs as light source and lensembedded PC cover /toughened glassand impact resistance of IK07 and electronic driverfixed on pole/wallwith and includingsuitabledia sizebracket as per manufacturer recommendation, bracket complete with MS flat iron clamps (clamp shall be 40x5 mm MS flat), nuts and bolts and washers painting the clamps with coat of aluminium paint over a coat of red oxide primer including connection complete all as specified. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
