|
| 1 | Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 2 | Removing old loose bottom or side cover of RCC slab beam columns etc. rubbing surface of concrete steel using wire brush and applying 2 coats of Alkaline rust converting primer (Feovert) after a waiting time of 6 hrs between coats and then applying another anti corrosive protective coating system ) for reinforcement bars (IPNet-RB) Conforms to IS-2770 Part-1 (Pull out Test) ASTM-3963-86 (Adhesion Test) and then applying concrete penetrating corrosion inhibitor (EPCO-KP100) and applying bonding new to old concrete (Epibond) Conforms to ASTM-C-882-87 and plastering on the fresh bond coat with Polymer Modified Mortar (Monobond) with 20mm C.M 1:3 and finishing coat of 6mm C.P 1:3 (1 Cement : 3 Sand ) incl. cost of transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent. |
| 3 | Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete. |
| 4 | Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 5 | Painting one or more coats with superior quality ready mixed paint of wood work of approved brand & manufacture in all shades on old work to give an even shade. |
| 6 | Painting one or more coats with superior quality ready mixed paint of steel work of approved brand & manufacture in all shades on old work to give an even shade. |
| 7 | Removing and refixing of door/ window shutters paneled or paneled and glazed including replacing of existing hionges chiseling etc complete as directed by Engineer- in - charge;Below 1 Sq.m area |
| 8 | Removing and refixing of door/ window shutters paneled or paneled and glazed including replacing of existing hionges chiseling etc complete as directed by Engineer- in - charge;Above 1 Sq.m area |
| 9 | Providing & fixing bright finished brass 100 mm. mortice latch & lock & a pair of levers handles with necessary screws etc. complete (Indian make of approved quality). |
| 10 | Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary;Glass panes 2mm thick` |
| 11 | Providing and fixing of mosquito net with velcro for windows. |
| 12 | 25 mm thick wooden shelves supported on 40 x 40 x 6 mm T or L iron brackets fixed at suitable distances but not exceeding 7 cm apart in 7.5 x 7.5 x 15 cm blocks of cement concrete mix 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm.nominal size) with;Nano or equivalent |
| 13 | Providing and fixing aluminium handle anodised or dyed to required colour or shade with screws etc. complete.;125 mm |
| 14 | Providing and fixing aluminium tower bolt (barrel type) anodised or dyed to required colour or shade with screws etc. complete.;250 x 10 mm |
| 15 | Providing and fixing aluminium tower bolt (barrel type) anodised or dyed to required colour or shade with screws etc. complete.;100 x 10 mm |
| 16 | Providing and fixing anodised aluminium hooks and eyes.;150 mm |
| 17 | Providing and fixing anodised aluminium sliding door bolt anodised transparent or dyed required colour and shade with bolts nuts and screws etc. complete:;250 x 16 mm |
| 18 | Providing and fixing anodised aluminium flat latch;200 mm |
| 19 | Providing and fixing curtain rods of 1.25 mm thick anodized aluminium plates brackets in pelment instead of wooden curtain rods of 25 mm diameter and brackets (actual length of rods to be measured).;12 mm dia. |
| 20 | Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws.;Plain grill |
| 21 | Providing and fixing anodised aluminium shutters in accordance with the specification annexed herewith including transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Openable windows and ventilators using 18 mm series shutters section.;Acrylic sheet |
| 22 | Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section |
| 23 | Providing and fixing anodised aluminium shutters in accordance with the specification annexed herewith including transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Adjustable louvered windows.;Figured glass |
| 24 | Providing and fixing doors frame of WPC make of size 84\"x36\" and thickness 4\"x2\" including cost of labour, tools, machinery, hardware, etc. complete as per directions of Engineer-in-Charge. c)4 x 2 ½ \" |
| 25 | Providing and fixing doors shutter of WPC make (32mm thick shutter) of size 32\"x84\" including cost of labour, tools, machinery, hardware, etc. complete as per directions of Engineer-in-Charge. |
| 26 | Providing and laying jet black mirror polish granite flooring and dado over 20mm thick base of cement mortar 1:4 laid over and jointed with cement slurry including rubbling complete Granitic slab (jet blck with mirror polish) 20 mm thick add q0% wastage 1.00 |
| 27 | Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm. |
| 28 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead. |
| 29 | Providing and fixing 1st quality ceramic glazed wall tiles (Johnson Somany Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer-in-charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete.;Wall Ceramic Glazed Tiles : 200 x 300 |
| 30 | Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor treads of steps landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 31 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 32 | Demolishing lime concrete & disposal of material within 50 mts. lead. |
| 33 | Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand) finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m. |
| 34 | Waterproofing of sunken slabs toilet blocks terraces on slabs under brickbats roofs watertanks. Cleaning the surface and filling cracks (if any) applying EPCO ACR wherever necessary Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent |
| 35 | Providing and laying plum concrete in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggregate 40 mm nominal size) with plums not exceeding 15% of the volume of the finished concrete of size ranging from 150 to 300 mm (but the maximum dimension not exceeding 1/3rd (one third) the least dimension of member under consideration excluding the cost of centering and shuttering:;With granitic or basaltic stone plums in:;foundation and plinth |
| 36 | Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete without door :;110 mm dia |
| 37 | Providing and fixing normal gauge polythene pipes of approved quality complete with special flange compression type fitting (of approved make) including trenching ad refilling etc (external work) (high density):;40 mm nominal bore |
| 38 | Providing and fixing rigid PVC S.W.R. (soil waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:;110 mm dia |
| 39 | Providing and fixing rigid PVC S.W.R. (soil waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:;75 mm dia |
| 40 | Providing and fixing ASTM UPVC pipe conforming to ASTM 2467 with ISO 14001 including all UPVC plain & brass threaded fittings including jointing of pipes & fittings with one step UPVC solvent cement trenching refilling & testing of joints complete as per direction of Engineer. External work.;SCH-80(blue)/(white);25mm outer dia. |
| 41 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).;15 mm outer dia CPVC pipe |
| 42 | Providing and fixing ball valve (brass) of approved quality :;High or low pressure with plastic floats:;25mm nominal bore |
| 43 | Providing and fixing brass full way valve (heavy) duty with wheel of approved quality :;15 mm nominal bore |
| 44 | Providing and fixing white vitereous china pedestal type (Europen type) water closet with seat as lid whth C.I. brass hinges and rubber fitings 15 lts white vitreous china low level flushing cistern with fittings as brackets 40 mm white precelain 3enameled flush bad 25 mm overflow pipe with specials and mosquito proof coupling of approved municipal design complete including cutting and making good the walls and floors where required.;W.C. pan with white plastic seat and lid |
| 45 | Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern 32 mm diameter M.I. or C.P. brass trap and union complete including cutting and making good the walls where required.;Flat back wash basin size 630x 450mm with a single 15 mm C.P. brass pillar taps. |
| 46 | Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws;600 x 20 mm size |
| 47 | Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw |
| 48 | Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993;15mm nominal bore |
| 49 | Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mm Jaquar make or equivalent. Confirming to IS 8931;1993;15mm nominal bore |
| 50 | Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS 8931:1993 15mm nominal bore. |
| 51 | Providing and fixing Hand Shower (Health Faucet) with 8mm dia ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards. |
| 52 | Providing and fixing CP shower with Arm of ESSCO/ARK Make or equivalent as per directions of Engineer in charge. |
| 53 | Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore:;45 cm (18\") length . |
| 54 | Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers. |
| 55 | Crack filler for plasters IPS cement sand screeds and non - structural cracks. Do Not open the cracks Clean the cracks so as to free them from oil dust loose particles etc. Moisten the surface with water Fill cracks with EPCO - ACR using spatula or a putty knife. While applying avoid formation of cavity or bubbles. After filling allow the surface to dry for at least 24 hours. Apply in layers at 24 hours interval. If the depth of the crack is more than 10mm. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalen. |
| 56 | An elastomeric cementitious waterproof coating for concrete and masonry.;Providing and applying on a well prepared vertical surface Masterseal 550EL of BASF make or equivalent elastomeric flexible two component polymers modified cementitious composite system that requires no addition of water at the site. The product shall be applied in minimum two coats to achieve total DFT of 1mm. The material shall be mixed and applied fully in accordance with the manufacturer\"s instructions. The product shall exhibit at least 40% elongation at ambient & 30% elongation in under water condition with tensile strength greater then 20 Kg/cm2. The product shall resist 1.5 bars pressure when tested as per DIN 1048 at 2mm DFT. When applied at 2mm DFT elastomeric coating shall be able to bridge crack up to 0.5mm width. All scaffolding ladders supporting materials etc. complete. Rates shall be inclusive of all labour materials tools and plant etc. complete. |
| 57 | Providing asbestos cement sheets roofings fixed with galvanized iron j or l hooks bolts & nuts 8mm dia G.I. plain and bitumen washer complete excluding the cost of purlines rafters and trusses.;Corrugated sheets 6mm thick. |
| 58 | Steel work welded (SAIL TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting hoisting fixing in position and applying priming coat of red lead paint.;In tees angles flats and channels |
| 59 | (B) By mechanical transport including loading unloading and stacking;(A) Limebuilding rubbish manure sludge moorum excavated rock;Limemoorum building rubbish;1KM |
| 60 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 including cutting of stone and making good the walls wherever required : Kitchen sink with drain board with coupling & all accessories complete with choke stop strainer Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete;Overall size 1040mmx510mm (41\"x20\"\") bowl size 460mmx410mmx200mm (18\"\"x 16\"\"x 8\"\") depth 200 mm. Glossy. 1.0mm thk\" |
| 61 | Providing and fixing brass bib cock (heavy) of approved quality :;20 mm nominal bore |
| 62 | Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931;1993 |
| 63 | Providing & fixing 600 x 120 mm glass shelf with C. P. brass brackets and guard rail complete fixed to wooden cleats with C. P. brass screws. |
| 64 | Providing, erecting and dismantling of scaffolding of width 1.20mts made up of 100mm dia wooden ballies with 38mm thick wooden planks platforms of width 1.20mts at every 2.50mts vertical spacing and for a total vertical height upto 9.00mts. from ground level etc. complete. Please Enable Macros to View BoQ information |
