Tender For Provision Of Certain Revenue And Minor Works Under Ge (Awc) Mhow.; 1 Surfaceexcavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft /loose soil complete all as specified and directed. 2 Excavating in trenches , n exc 1.5m wide and nexc. 1.5m in depth for foundation , etc. or for shaft ,wells and cesspits in soft/loose soil complete all as specified and directed. 3 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. 4 Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point in soils etc complete all as specified and directed. 5 M&L PCC 1:4:8 type D2 using 40mm grade stone aggregate as in foundation concrete filling and mass concrete complete all as specified and directed. 6 M&L PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate )in benching to man holes and finishing of exposed surfaces of concrete etc complete all as specified and as directed. 7 M&L for precast concrete 1:2:4 type B-1 (using 20mm graded stone aggregate)in manhole covers set in CM 1:4 including necessary form work etc.Note :-Reinforcement will be measured and paid separately) including necessary form work etc complete all as specified and as directed. 8 M&L RCC (nominal mix) 1:2:4 type B-1 (using 20mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed 9 Description all as per ser item No 8.00 above but in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified and directed 10 Description all as per ser item No 8.00 above but Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed 11 Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms / moulds / mitred / stopped ends etc complete all as specified and as directed. 12 Supply only integral water proofing compound of approved make complete all as specified and directed. 13 M&L for brick work with old size sub class B bricks straight or curved on plan exc. 6m mean radius and built in CM 1:6 etc complete all as directed. 14 M&L for brickwork with subclass ‘B’ old sized bricks, straight or curved on plan to any radius in half brick thick walls and built in CM 1:4 etc complete all as directed. 15 Cutting chasesin brick masonry walls built in cement mortor for concealed water tubing or concealed conduit wiring, etc., and making good in CM 1:3, cutting not exc 10 cm girth etc complete all as directed. 16 Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. 17 M&Lfor form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work not exceeding 200mm thick complete all as specfieid and as directed 18 Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. 19 S&F 30 mm thick Factory Made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet 5mm thick‘C’ channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and plain colour PVC sheets for top rail, lock rail & bottom rail on either side, and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s instructions and drawing. The width of stiles & rails will be in proportion to the width of the door shutter as per SSR Clause No 8B.2.1 20 M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing etc complete all as directed. 21 S&F 150 mm size aluminum anodised, barrel tower bolts of extruded section etc complete all as directed. 22 S&F aluminum alloy anodised, sliding door bolts with hasp and staple, (bolt type) and fixing clips of sheets, cast or extruded section and fixing boltand sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long etc complete all as specified and directed. 23 S & F 100mm sizeButt hinges, medium weight, cold rolled mild steel, and fixed etc complete all as directed. 24 S&F 150 mm long extruded anodized aluminum alloy handles, fabricated type,etc complete ass as directed. 25 M&L TMTsteel bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 26 Description all as per ser item No 25.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders 27 M&L for cleaning of roof surfaces and applying a coat of bituminous primer @ 0.25kg per sqm including layingtorch applied APP torch membrane 3.5kg / Sqmwith non woven polyster mat as reinforcement,with 100mm side lap and 150mm end lap Apply aluminium bituminous paint 0.11 Kg / sqm, M/s. Texas Ltd.( formerly known as STP Texsa Ltd )“MOPLY FV - 3 OR . HYPERPLAST OF IWL INDIA LTD. complete all as directed. 28 Material and labour for water proofing treatment with APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified with non woven polyester matt black finished over compatiable primer at 0.3 litre per sqm,torching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with at coat of bitumastic aluminium paint over the membrane. The over lap joint shall be provided of 100mm in longitudinal direction and 150mm in tranverse direction respectively.All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage. complete all as specified and directed.Note : The work shall be carried out by authorized applicators of manufacturers. 29 M&L Cement concrete type D-2, 1:4:8(using 40mm graded stone aggregate) 75mm thick as in subbaseof floor, pavings etc complete all as specified and directed. 30 M&L PCC 1:3:6 type C1 40mm thick laid in slope of 1:20 and alternate bays incl finished even and smooth without using extra cement and joints in the plinth protection shall be filled with mastic filling comprising of 1 part of heated bitumen 85/25 or 90/100 grade and 3 part of sand (all the wt) complete all as specified and directed. 31 M & L for glazed ceramic coloured joint free tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick with and including 10mm thick CM 1:4 backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed. 32 M & L forNon - skid/Glossy finish/Matt finish joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) laid in floors area of each tile exc. 0.06 sqm but n.exc 0.11 sqm, in floors etc. with and incl 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed. 33 M&L 10mm thick bedding layer in CM 1:4 on roof top surfaces mixed with integral WPC 2% by weight of cement and finishing the same even and smooth without using extra cement etc complete all as directed. 34 M & Lfor 10 mm thick rendering in CM 1:6 on brick/ concrete surfaces and finishing the surfaces even and smooth with a thin layer of sagol etc complete all as directed. 35 M&L for rendering 15 mm thick in CM 1:4 mixed with water proofing compound on brick or concrete surface Note :- WPC will be measured and paid separately) finishing the surface even and smoothwith usingextra cement etc complete all as specified and as directed. 36 M&L for 15 mm thick rendering in CM 1:4 on brick/concrete external surfaces of walls sand faced sponge faced finish etc complete all as directed. 37 M&L for preparation of newly plastered surfaces of wallsand applying one coat of alkali resistant primer over a coat of birla white cement putty,sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as directed. 38 M&L for preparation of newly plastered surfaces of wallsand applying two coats of cement based paint etc complete all as directed. 39 M&L for preparation of newly plastered surface and applying three coats of white wash on ceiling etc complete all as directed 40 S & F 4.00 mm thick figured glass pin headed tupe fixed in ventillators etc complete all as directed. 41 M & L for preparation of new steel surfacesexc 10 cm width/girth and applying two coats of synthethic enamel paint over a coat of redoxide primer etc complete all as directed. 42 M & L for 15 mm bore of tube medium grade Galvanised steel water tubing with all fittings and fixed complete to walls, cuttings or laid in floor including taking down steel tubing with connections etc complete all as directed. 43 Description all as per ser item No 42.00 above above but 20mm bore pipe 44 S&F in repairs 32mm bore dia high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as directed. 45 S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as directed 46 S&F 15mm bore bib taps, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe etc complete all as directed 47 S&F 15mm bore pillar taps, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe etc complete all as directed 48 S&F 15mm bore stop valves, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe with long shank and cup (concealed type) etc complete all as directed 49 S&F 20mm bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipeetc complete all as directed. 50 S&F 20mm bore ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe etc complete all as specified. 51 S&F shower arm 15mm size, 195mm long with bend of 45degreee with flange of PTMT any colour. (Minimum weight 40 gms) complete all as specified and directed. 52 S&F fancy type Brass chromium plated 600mm long Towel Rod fixed with screws and wooden/plastic cleats etc complete all as directed. 53 S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as directed. 54 S&F 75mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as directed. 55 Description all as per ser item No 54.00 above but 110mm dia complete all as specified and directed. 56 S&F 110mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wallsetc complete all as directed. 57 S&F 75mm bore of pipe PVC (SWR) bends any radius with access door etc complete all as directed. 58 Description all as per ser item No 57.00 above but 110mm dia complete all as specified and directed. 59 S&F 110 mm bore of pipe PVC (SWR) plain bends any radius etc complete all as directed. 60 S&F 110mm bore of pipe PVC (SWR) vent cowletc complete all as directed. 61 S&F Cast iron Nahani trap with diameter of outlet 75mmwith grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as directed. 62 M&L for 1:4:8 type D-2 (40mm graded stone aggregate)Concrete bed to drain pipes including forming cradles against the sides of pipe after they are laid and tested for 150 mm bore of pipe etc complete all as specified and as directed. 63 Supply and lay Reinforced concrete pipes150 mm bore of pipe class NP2 laid in trenches and jointed complete with collars etc complete all as specified and directed. 64 Cutting into existing manholes for connecting new drains, 150mm internal dia of pipe making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed. 65 S & F glazed earthen ware viterous china squatting pan, `Orissa pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) white coloured etc complete all as directed. 66 S&F glazed earthen ware viterious china wash basin white coloured flat back size 550x400mm, outlet of 32mm bore HDPE outlet pipe with necessary fittings, 32mm bore brass CP waste couplings etc complete all as directed. 67 S & F PVC valve less, syphonic action type, flushing cistern10 ltr capacity, low level white, with inlet, ball valve, float and handle, including brackets etc complete all as directed. 68 S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as directed 69 S&F fancy type Brass chromium plated soap dish fixed with screws and wooden/plastic cleats etc complete all as directed. 70 M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering and levelled the surface complete all as specified and directed. 71 M&L hard core of gauge exc 63mm but not exc 15cm broken bouldersdepositing, spreadand levelled in layers n exc 15cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed. 72 M & L100 mm thick Cement concrete type B-1, 1:2:4 (40mm graded stone aggregate) as in sub base.in cement mortar 1:6 and ponted in 1:3 complete all as specified and directed. 73 M&L for 40mm thick PCC 1:2:4 type B0 (12.5mm graded stoneaggregate)mixed with WPC at 2% by weight of cement, complete all as specified and as directed. Note:WPC shall be measured and paid separately. 74 Material and Labour Providing and laying 60mm thick factory made chamfered edge precast cement concrete interrlocking paver blocks of grade M-35 conforming to IS 15658-2006 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the 50 mm thick sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. 75 S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. 76 M&L 75mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floors etc complete all as specified and directed. 77 M&L 40mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregatecomplete all as specified and directed. 78 S&F steel works in tubular/ posts/ trusses/ purlinincluding special shaped washer etc. complete using ERW or onduction butt welded tubes conforming to IS 1161-1797 grade St 240 79 S & FPre- painted galvalume aluminum zinc coating GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa andAIZ 150 GRMS/Sqm as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. 80 S & F Powder coated aluminium sliding glazedwindows with three track shutter sliding (two shutters glazed and one shutterwire mesh) shall be following specification complete all as specified and as directed by Engr-in-charge.(i)Windows frame of cross section 101mm x 44mm x 1.5mm thick.(ii)Three way track for sliding shutters of cross section91.8mm x 31.75mm x1.1mm thick.(iii)Sliding shutter frame of cross section40 x 18 x 1mm thick.(iv)4 mm thick tintedglass superior quality.(v) IDPE Rubber guasket for fixing of glass.(vi)Locking cleats per shutter -01 Nos.(vii)Sliding rollers per shutter - 02 Nos.including satety steel grill(viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos. 81 Providing & Fixing RAJSHRI factory made 100% Solid WPC ( Wood Polymer Composite ) - Door Frame 125mm x 50 mm ( Moulded ) Single Rebated made from Wood Polymer Composite ( Single Extruded Process ) material comparising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & manufactured by RAJSHRIan ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of ( Min. 990 N ), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and length, , all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company( Hold Fast or Dash Fasteners shall be paid separately ) 82 Providing“RAJSHRI” Brand Factory Made 24mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Flush Door Shutter of required size comprising ofvirgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbmmanufactured by RAJSHRI an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 50 N ( Face ) & 1100 N ( Edge ),Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutterand fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company. 83 S&F aluminium anodised barrel tower bolts of extruded section with 100 mm long bolt, all as specified . 84 S&F aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, all as specified . 85 Providing and fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum ) False ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture contents less than 2% humidity resistance of 99% NRCO.50 to .75 as pe IS8225:1987, Noncombustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (Minimum) to be laid in true horizontal level suspended on interlocking metal T Grid of hot dipped galvanized iron section of 0.33 mm thick ( galvanised @ 120 gms per sqm including both sides ) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600mm, suspened from ceiling using galvaized mild steel items ( galvanizing @ 80 grams per sqm) i..e 50mm long, 8mm outer diameter M-6 dash fastener 6mm dia fully threaded hanger rod upto 1000mm length and L-swhape level adjuster of size 85x25 x 2mm galvanised iron permieter wall angle of size 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm ceneter to centre and 50mm long dry wall wood screws. The kwork shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge. 86 M&L for PCC 1:2:4 type B1 as in coping including use and removal of necessary steel formwork all as specified. 87 M&L forrendering 15 mm thick in cement mortar 1:6, on fair faces of brick or concrete surfaces, and surfaces finished even and fair complete all as specified. 88 M&L forrendering 10 mm thick in cement mortar 1:4, on fair faces of brick or concrete surfaces, and surfaces finished even and fair complete all as specified. 89 M & L for chequered cement concrete tiles 40cm x 40cm x 40 to 25 to 30mm thick (Glosy finished)with grey cementandpigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors and cut & polished complete all as specified and directed. 90 M&L for 75mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in sub base of fllor, plinth protection finishing the surface even and smooth without using extra cement. 91 S&F Glazed earthen ware coloured tilesany size 7mm thick set and jointed in neat cement slury and pointed in white/coloured cement to match in vertical surfaces incl 10 mm thick backing coat using CM 1:4 on vertical surfaces of walls etc to fixing glazed / ceremic tiles complete all as specifed and directed. 92 S&F non skid ceramic coloured tilesany size 7 to 8mm thick (Sqare/Rectangular) area of each tile exc 0.06Sqm but n exc 0.11Sqm in floors set and jointed in neat cement slurry and pointed in white/ coloured cement to match all as specified. Including screed bed or bedding layer 20mm thick in CM 1:6 set andjointed in neat cement slurry and painted in white or doloured cement to match complete all as specifed and directed. 93 S&F MS framed work as in gates of angle or other sections complete all as specified.FE410 B 94 M&L for 1mm thick MS plain black sheet as covering to door shutters (riveted to steel door shutter frame and matching with existing surfacecomplete all as specified and directed. 95 Demolition of Concrete(reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. 96 M & L for Reinforced Cement Concrete grade M-25(nominal mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. 97 M & L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. 98 Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete. 99 Dismantling of Wallandceilingboards(fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet complete. 100 M&L Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified. 101 S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified. 102 M& L for chicken wire mesh 28 guage for fixing in GI frame work of PoP ceiling complete all as specified and directed. 103 M & L for Fully Modular kitchen with following spcification:(1) One base unit(below countertop) and one wall unit(above counter top)(2) Base unit:- L= 14ft (approx) with Box height= 850mm(3) wall unit :- L= 8ft (approx) with box height=600mm, partition/compartment will be described by manufacturer/user requirement.(4)Material to be used:- Plywood BWP Grade (IS710) with all faces will be laminated of 1mm thick glossy laminates as per approved shade and other edges as per laminates for Carcass and Shutters of base unit and wall unit.(5) Tandem Drawers:-4- 1 nos 6- 1 nos 8 - 3 nos(6) Cutlery Drawer :- 4- 1 nos(7) Plate Holder:-1 Nos(8) Thali Holder :-1 Nos(9) Pull Out:- 1 Nos (10) Detergent holder and dustbin holder :- 1 Nos(11) All hinges and channels to be soft close type.(12) All handles to be standard G profile type.(13) Pantry Unit :-1 Nos with 6 nos drawer of size 2ft x 2ft. (14) Chimney- Auto clean with sweep capacity of 1300 cum/hr with 5 years warranty of chimney parts and motor and 5 year AMC including fixing arrangement, duct pipe, cooker hood etc complete. Make: hindware, Faber and equivalent.Note: 1. Job will be executed by manufacturer having past experience and it will be approved by GE. 2.Any other part / item not included in the specification above, however required at site, shall be provided by the contractor & price of the same will be deemed to be included in the quoted rates.3. Manufacturer will make 3D plan and get it approved by GE. 104 M & L for Fully Modular kitchen with following spcification:(1) One base unit(below countertop) and one wall unit(above counter top)(2) Base unit:- L= 6 ft(approx) with Box height= 850mm(3) wall unit :- L= 4ft(approx) with box height=600mm, partition/compartment will be described by manufacturer/user requirement.(4)Material to be used:- Plywood BWP Grade (IS710) with all faces will be laminated of 1mm thick glossy laminates as per approved shade and other edges as per laminates for Carcass and Shutters of base unit and wall unit.(5) Tandem Drawers:-4-1 nos 6- 1 nos 8 - 3 nos(6) cutlery drawer :-4- 1 nos(7) Plate Holder:- 1 Nos(8) Thali Holder :- 1 Nos(9) Pull out:- 1 Nos (10) Detergent holder and dustbin holder :- 1 Nos(11) All hinges and channels to be soft close type.(12) All handles to be standard G profile type.Note: 1. Job will be executed by manufacturer having past experience and it will be approved by GE. 2. Any other part / item not included in the specification above, however required at site, shall be provided by the contractor & price of the same will be deemed to be included in the quoted rates.3. Manufacturer will make 3D plan and get it approved by GE. 105 S & F of S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever bracketsand connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm 106 Complete removal of existing treatment on wall(Internal/External) /roof projections including facis, cornics etc(Internal surfaces by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc) & (External surface by Jet washer) by skilled labour complete all as specified and directed. 107 M & L for providing and applying minimum 1mm thick wall care putty over prepared surface and rubbing it with mechanical sander (having mechanical vacuum mechanism) to achive the surface even and smooth for further application of finishes complete all as specified and directed. 108 M & L for applying two coats of plastic emulsion over a coat of primer on prepared wall putty surfaces of internal wall complete all as specified and as directed. 109 M&L brick work with Fly ash straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed. 110 Excavating in post holes (Or similar) each n exc 0.5 Cum getting out returning fillin in and ramming earth or broken rubble mixed with earth around, in layers n exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good. 111 M&L for MS framed structure roof trusses (framed), trussed, purlins, crane gantriesand fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats of Grade Fe 410 -W (Gde- E- 250) quality- A etc. complete all as specified and directed. 112 Supply only chain link fencing including line wire any mesh size and any type of standard rails staining bolt etc including provision of binding wire etc complete. 113 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire etc complete all as specified. 114 Earth work in excavation of all kind of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) , as directed by Engineer-incharge complete all as specifed and directed. 115 M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work, complete all as specified and directed. 116 M & LProviding and laying at or near ground levelfactory made kerb stone of M-25 grade cementconcrete in position to the required line, leveland curvature, jointed with cement mortar1:3 (1 cement: 3 coarse sand), includingmaking joints with or without grooves(thickness of joints except at sharp curveshall not to more than 5 mm), including making drainage opening wherever required complete. complete all as specified and directed. 117 M&L point wiring with 1.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceilingwith and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes any size/module, conceiled on walls and fixed by neans of brass screws incl modular cover plates and cover frme any size/module,for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for the following complete for One light / fan /bell controlled by one, one way switch 5/6 Amps all as specified and as directed . 118 Description all as per ser item No. 117.00 above, but for one 3 pin, 5/6 amps socket outlet point on independent boardcontrolled by one, one way 5/6 amps switch 119 Description all as per ser item No. 117.00 above , but for one 3 pin, 5/6 amps socket outlet point on same boardcontrolled by one, one way 5/6 amps switch 120 M&L point wiring with 2.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceilingwith and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes any size/module, conceiled on walls and fixed by neans of brass screws incl modular cover plates and cover frme any size/module,for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one 15A socket point independentcompleteincl taking down of old unsv point wiringall as specified and directed. 121 S&F in replacement of Ceiling rosethree terminals surface bakelite type, AC, 50 HZ, 230V complete all as specified and directed. 122 S & F modular switch1 way 6 A , 1 modulecomplete all as specified and directed. 123 S & Fswitch modular type 16 A, 1 module complete all as specified and directed. 124 S&F socketmodular type multipurposes 6/16 A, 2 module complete all as specified and directed. 125 S&F surface /wall mounted LED batten fiitng slim channel type poly carbonate bodyT-8 tube light luminare with system efficiency 120 lumens per watts. High quality polycarbonate end cap in white finish and snap fitted to the housing completeall as specified and directed.integrated electronic driver complete with all connectedaccessories all as specified and directed. 126 S & FLED bldg security light fitting30wattmade up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection complete incl mounting pipe made of GI tubing 40 mm size 1M length bend into size with mounting brackets nut bolt and washers all as specified and directed. 127 S&F MCB DB SPN 8 way ,IP-43, IK 09, double door type with metal doorwith 200 Amps rated bus bar ,230 volts, 50 Hz complete all as specifed and directed. 128 Supply & FixMCB SPN 32 Amps current rating C series 10 KA breaking capacitycomplete all as specified and directed. 129 Supply & FixMCB SP 6 to 32 Amps current rating C series 10 KA breaking capacitycomplete all as specified and directed. 130 M & L sub main wiring with 2 runs of 06 sqmm main wire along with 1 run of 6 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed / surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good disturbed surfaces complete all as specified and directed.NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. 131 S & Fexhaustfannon metalic single phase 230 volt of size 250 mmsweep with louverincl necessary altration in Aluminium or Iron window all as specified and as directed 132 supply and fix electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 ltrs BEE 5 star rated complete with all accessories such as safey valve, thermostat, NRV, connecion pipe etc. 133 Supply and laying and testing Cable XPLE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) 1100 volts grade with stranded aluminium conductor of6 sqmm4 core all as specified and as directed. 134 M&L fine sand cushioningfor cable protection in layers incl punning all as specified and directed.Note : Punned down thickness shall only be measured. 135 Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm all as specified and as directed. 136 S & F tubes, light grade,galvanised, with all fitting of size 40 mm laid in trenches for cable protection all as specified and directed. 137 S & Fmodular socket 6 Amps 2/3 pin combined2 module complete all as specified and directed. 138 S&F wall mounted fan 400 mm sweep, single phase 230 volts including flexible copper cable for electric connections, ISI marked complete all as specified and as directed. 139 M&L for LED ceiling fitting 33 to 36 watts, 2 ft x 2 ft fittings suitable for aluminium grid ceiling, lumen out put ≥ 122 lumen/ watt,THD < 10% environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source,incl inbuilt drivers suitable for Grid ceiling complete with atration of aluminium frame work wherever necessary during installation all as specified and directed.
