|
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 2 | M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base finished even and fair surfaces without using extra cement, complete all as specified and directed. |
| 3 | M&L for non skid jointless cerermic coloured tiles(Ist quality) 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.38 Sqm in neat cement slurry and pointed in white or coloured cement with pigment over and including 15 mm thick screed bed in cement motar 1:6, complete all as specified and directed. |
| 4 | All as per above item No 3 but as in skirting, dados/Vertical surfaces over and including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 rough finished surfaces to receive tiles. |
| 5 | M&L for 9 to 10mm thick Vitrified ceramic tiles, light shade mat finish (Square / Rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 15 mm thick screed bed in cement motar 1:6, complete all as specified and directed. |
| 6 | All as per above item No 5 but as in skirting, dados/Vertical surfaces over and including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 rough finished surfaces to receive tiles. |
| 7 | M&Lfor coloured glazed ceramic tiles 350x250x7mm thick/450X350X7mm in vertical surfacesetc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 rough finished surfaces to receive tiles, complete all as specified and directed. |
| 8 | Demolition of Cement Concrete in ground floor and as inpavingsn.exc 15cm in thickness ( below or above ground level) in patches , & removal of rubbish outside MoD land, complete all as specified and directed. |
| 9 | M&L for 75mm thick cement concrete type B- 2, 1:2:4 (20mm graded stone aggregate) as insub floors , sub-base,floors and paving etc. finished even and fair surface without using extra cement complete all as specified and directed. |
| 10 | M&L sand filling under floors or in foundation, complete all as specified and directed. |
| 11 | M&L for 60mm thick Machine pressed precast concrete interlocking paver block (M-35 Grade) over and including 15mm thick screed bed in cement mortar 1:6 any shape and size confirming to IS 15658-2006 laid over sand cushioning, complete all as specified and directed.Note :-Sand cushioning shall be measured and paid seperately under relevent items. |
| 12 | Hacking out broken glass (any size shape, thickness, quality or description) from wooden/metalframe glazed with putty or fixed with beads having area not exc 0.50 sqm in each pane, complete all as specified and directed. |
| 13 | S&F 4.8mm thick sheet glass selected qualityplain in squares n exc 0.5 sqm each pane and fixed with glass putty or beading, complete all as specified and directed. |
| 14 | Taking down and refixing in same opening shutters of any descriptionexceeding 1 Sqm and not exceeding 2 Sqm each, complete all as specified and directed. |
| 15 | Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 16 | M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 17 | M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces even and fair without using extra cement, complete all as specified and directed. |
| 18 | M&L for rendering 5mm thick on fair faces of ceiling in cement mortar 1:3and surfaces finished even and smooth without using extra cement, complete all as specified and directed |
| 19 | M&L for preparation of new plastered surfaces of wall and applying two coats of exterior acrylic emulsionpaint over a coat of primer over a coat of wall care putty in camouflage pattern, using minimum 3 different approved tint/ colour as approved by GE, complete all as specified and directed. |
| 20 | M&L for preparation of new plastered surfaces of wall and applying two coats ofdistemper oil emulsion over a coat of primer, complete all as specified and directed. |
| 21 | M&L for preparation of newplastered surfaces of ceilingand applying three coats of white wash, complete all as specified and as directed. |
| 22 | M&L for preparation of old plastered surfaces of wall and applying two coats of distemper oil emulsion, complete all as specified and directed. |
| 23 | S & F as in repair 500 Ltrs capacity Rotational moulded polythylene water storage tank minimum three layered, white in color (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed. |
| 24 | S&F in repair 20mm dia PTMT ball valves, high pressure with polythene float and flynut complete screwsed for iron pipe for brass ferrule and fixed etc, complete all as specified and directed. |
| 25 | S & F in repair wash down water closet (Pedestal pattern) including connection to drain pipe (outgoing pipe) and to flush pipe, antisyphonage pipe etc, complete all as specified and directed. |
| 26 | S & F in repairs vitreous china urinal flat back, size 465mm x 355mmx 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and flush pipe and waste pipe) but including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screwes pointing around urinal back including waste coupling and discharge pipe, complete all as specified and directed. |
| 27 | S&F in repairvitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rest excluding flushing cistern and flush pipe complete including provision of cement concrete bedding, complete all as specified and directed. |
| 28 | S&F in repair vitreous china wash hand basin white flat back size 550mmx400m excluding taps waste china and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand but including waste coupling and waste pipe, complete all as specified and directed. |
| 29 | S&F in repair 15 mm bore Pillar taps fancy type, cast copper alloy chromium plated, screwed down high pressure, with crutch or butterfly handle, complete all as specified amnd directed. |
| 30 | S&F in repairs fancy type stop valve cast copper alloy chromium plated with long shank screwed down high pressure with crutch or butterfly handle of 15 mm bore, complete all as specified and directed. |
| 31 | S&F in repair 15mm bore fancy type bib tap cast copper alloy chromium plated, screwd down, high pressure with crutch or butter fly handle, for iron pipe or for brass ferrule and fixing, complete all as specified and directed. |
| 32 | S&F in repair tube \"medium grade\" galavanised, with all fitting and fixed complete to walls and ceiling etc 15mm bore, complete all as specified and directed. |
| 33 | All as per item No 32 above but for 20mm bore. |
| 34 | S&F in repair 20mm bore nipple PTMT suitable for HDPE water tank (Minimum weight 45gm), complete all as specified and directed. |
| 35 | M&L in replacement 75mm dia PVC (SWR)floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 36 | M&L in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed. |
| 37 | S&F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 38 | S&F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 39 | S&F in repair 75mm PVC (SWR) bends any radius, complete all as specified and directed. |
| 40 | S&F in repair 110mm PVC (SWR) bends any radius, complete all as specified and directed. |
| 41 | S&F in reapir 100mm dia PVC (SWR)P or S traps, complete all as specified and directed. |
| 42 | S & F in replacement kitchen sink with drainage board made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowel size 410mm x330mm x 160mm, complete all as specified and directed. |
| 43 | S&F in replacement stainless steeltowel rail, 20mm dia, D type, 60cm longfixed with and including chromium plated brass screw and wooden /plastic cleatetc, complete all as specified and directed. |
| 44 | S&F in replacement 10 Ltrs capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed. |
| 45 | S&F in replacementlooking mirror of selected quality glass with PVC frame size 600X450mm and fixed wooden /plastic cleatetc, complete all as specified and directed. |
| 46 | S&F in replacement of Plastic water closet seat, any colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 47 | S&F in replacement ofhealth faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m long flaxible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 48 | M&L for cleaning and removing of all scale and dirt etc of over head tank capacity not exceeding 500 Ltr and from mouths of circulating pipes using bleaching powder and after cleaning proper water supply checked to all connections where the water tank is connected etc, complete all as specified and directed. |
| 49 | Demolition of stone slab and tiles of any desc or any thickness in floor or apron etc laid bedded in cement morter, complete all as specified and directed. |
| 50 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 15 mm thick screed bed in cement mortar in 1:4, complete all as specified and directed. |
