Tender For Internal Periodical Services With Misc Work At Arc Charbatia Under Ge (I) (Cg) Bhubaneswar; 1 M&L for preparation of old plastered ceiling surfaceswith removing of nails, making good holes, cracks if requiredand applying 1-coat of distemper oil emulsionon ceiling surface complete all as specified and directed. 2 M&L for preparation of old plastered wallsurfaceswith removing of nails, making good holes, cracks if requiredand applying 1-coat of distemper oil emulsionon wall surface complete all as specified and directed. 3 M&L for preparation of old plastered ceiling surfaceswith removing of nails, making good holes, cracks if requiredand applying 2-coat of distemper oil emulsionon ceiling surface complete all as specified and directed. 4 M&L for preparation of old plastered wallsurfaceswith removing of nails, making good holes, cracks if requiredand applying 2-coat of distemper oil emulsionon wall surface complete all as specified and directed. 5 M & Lapplying 1-coats of 1st quality acrylic distemper (ready mix)having VOC content less than 50 gms/Ltr, of approved manufacturer,of required shade and colour wall/ceiling complete all as specified and directed. 6 Taking down of cement plaster on walls of any description incl raking out of joints hacking for key scrubbing down with water etc complete all as specified and directed. 7 Demolition brick work built in cement mortar or cement lime mortarincluding all quoins, arches,pillars etc but excludingashlar facings, dressed stoneworks and precast articlescomplete all as specified and directed. 8 M&L for brick work with sub class B Fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.. 9 M & L for brickwork with sub-class B Fly ash bricks, straight or curved on plan to any radius in half brick thickwalls, built in CM (1:4) complete all as specified and directed. 10 M&L rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and smoot on walls in cement mortar (1:4), using water proofing Compound complete all as specified and directed.NOTE:WPC will be measured and paid separately as supply only. 11 Supply only integral water proofing compound complete all as specified and directed. 12 M & L for rendering 15mm thick in CM (1:6) on fair face of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed. 13 M & L for rendering 10-15mm thick in CM (1:4) onceiling patchy surface in 2-3layer at patch area on fair face of brick work or concrete surfacesfinished even and smooth (without using extra cement) including taking down of cement plaster on ceiling of any description incl raking out of joints hacking for key scrubbing down with water complete all as specified and directed. 14 M & L for preparing newly plastered wall/ceiling surfaces and applying two coat of distemper oil emulsion over a coat of chalk white primercomplete all as specified and directed. 15 M & LComplete removal of old existing treatment of wall, concrete surfaces and removing of nails, making good holes, cracks etc and applying two or more coats of 1st quality acrylic distemper (ready mix)having VOC content less than 50 gms/Ltr, of approved manufacturer,of required shade and colour over wall care putty in wall 1-2mm thick wall/celing complete all as specified and directed. 16 M & L for preparationfor old or previosuly treated wooden surfaces of any description not otherwise described over 10cm width or grith and applying one coats of synthetic ename paint on wooden surface complete all as specified and directed. 17 M & L for preparation of oldsteel surfaces of any descirption not otherwise described over 10cm width or grith and applying one coats of synthetic enamel paintcomplete all as specified and directed. 18 M&L for preparation of old wooden surface of any description not otherwise described over 10cm width or girth and applyingtwo coat of synthetic enamel paint complete all as specified and directed. 19 M & L for preparation of old or previously untreated steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint complete all as specified and directed. 20 S&F in repairs kitchen sinks without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste couplingincluding bedding in cement mortar on to dwarf wall or including fixing cantilever brackets andconnecting union to pipe, overall size 610mm X 460 bowl size 560mmX 406mm X 203mm etc (Make Prayag Cat No 1324D or equalent) complete all as specified and directed. 21 S & Fin repair 600mmx450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC board or plywood and fixed to plugs with chromium brass screws and cup washers complete all as specified and directed. 22 S&F in repair Door seal (Snake guard) with Aluminium frame powder coated complete all as specified and directed. 23 S&F in repair PTMT Angle stop valve,15mm bore, any colourhigh pressure screwed for any type of pipecomplete all as specified and directed. 24 S&F in repair PTMT Pillar tap,15mm bore, any colourhigh pressure screwed for any type of pipecomplete all as specified and directed. 25 S&F in repairs health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed. Make Prayag or Equivalent 26 S&F in repair PTMT Bib tap,15mm bore, any colourhigh pressure screwed for any type of pipecomplete all as specified and directed. 27 S&F in repair Vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including P or S trap, complete all as specified and directed. 28 S&F in repair for PVC water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. 29 S&F in repairvitreous China squatting pan of “Orissa Pattern” of size 580x440mm whitewith integral footrest complete including making good floors complete all as specified and directed. 30 S&F in repair10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe complete all as specified and directed. 31 S&F in repair sheet glass shelf assembly consisting of 5.5 mm th sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long complete all as specified and directed. 32 S&F in repair Soap dish PTMT , fixed to plugs with chromium plated brass screws complete all as specified and directed. 33 S&F in repair vitreous china wash hand basin white flat back of size 550 x 440mm including CI brackets, brass chromium plated 32 mm waste fitting coupling, waste pipe etc., complete all as specified and directed. 34 S & F in repairPVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. 35 S&F PVC waste pipe 32mm dia complete all as specified and as directed. 36 Supply & fixedin repair fancy type shower rose 30cm long CP brass pipe with swivel joint complete all as specified and directed. 37 S&Fin repairs tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges ofbrass chromium plated including brackets. complete all as specified and as directed. 38 S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified 39 S&F in repair stainlesssteel tubing of 25 mm diamin. 1.0 mm wall thickness as in curtain rod complete incl fixing of brackets,Knobfency typefixed with stainless steel screws etc complete all as specified & directed 40 Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended item complete all as specified and directed. 41 Use and waste of form work to chajjas or any other RCCwork for fair finish surfaces all as specified and directed . 42 M&L for RCC type A-11:1.5:3using 20mm graded mechanically crushed stone aggregate as in chajjas/lintel/beam/cookig plateform etc complete all as specified and directed. 43 M&L for TMT bars 10mm dia and over cut to length bent to shape required and binding with ms wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. 44 M&L for TMT bars 6 to 8mm dia and over cut to length bent to shape required and binding with ms wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. 45 Dismantling floor, hearth or wall tiling/stone slab including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 46 M&L for Glazed ceramic tile of approved shade and pattern on verticle surface such as skirting/dado etc. 350X250X7mm/ 450X300X7mm thick,set and jointed in neat cement slurry over and including 10mm thick backing coat plasterin CM (1:4) and pointed in white or coloured cement to match to coloured of tiles. complete all as directed as specified . 47 M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. 48 S & F 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm screed bedding in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed 49 Taking down chowkats or frames with shutter not exc 1.5 sqm (without taking off shutters from frames) and removing from site complete all as specified and directed. 50 S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.(Make-Rajshree) 51 S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded piain colour PVC `C channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. (Make-Rajshree) 52 S&F 125 mm long extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed. 53 S&F 200mm long aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed. 54 S&F 100mmbutt hinges,extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed type complete all as specified and directed. 55 S&F PTMT grating openable 100mm dia size with/without hole including fixing with white cement complete all as specified and directed. 56 S&F aluminium sliding windows with 50 micron powder coating, three track sliding windows with two glazed shutters, 5mm thick tinted glass ordinary quality and one shutter of stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm including good quality of bearing handle, locks, including EPDM gasket to render the glazing, air and water tight etc complete all as specified and directed. 57 S&F mild steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed. 58 M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work C/onforming to Fe 290 Gde E-165 complete all as specified and directed. 59 M & L for preparation of new or previously untreated steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint incl one coat of red oxide complete all as specified and directed. 60 Dismantling of structural steel work including door, gates, grills etc complete all as specified and directed.
