|
| 1 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | Dismantling stone slabs and tiles of any description or thickness in floors,aprons laid dry or laid dry and pointed complete all as specified and directed. |
| 3 | M&LPCC(1:4:8)typeD-2(using40mmgraded stone aggregate) as in foundations, filling and mass concrete all as specified and as directed. |
| 4 | M&Lfor chequered cement concrete tiles with grey cementand pigment of size n exc 0.16 Sqm and minimium 25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6complete all as specified |
| 5 | M&Lfor 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colourconferming to IS 15658-2006 andincluding joints filled with sandcomplete all as specified and as directed. |
| 6 | M&Lfor 18-20 mm thick Black granite slab of approved quality ofany sizebeddedand jointed in greycement slurry and pointed with white cement with admixture of pigment to match the shade of granite stonelaid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges complete allas specified anddirected. |
| 7 | M&L 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) for levelling course in floors complete all as specified anddirected. |
| 8 | M&L for Endura (Parking Tiles) colouredtiles 7-8mm thick of size 300x300x7mm thick in floors etc set and jointed in neat cement slurry and pointed in white or colouredcement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed. |
| 9 | Demolition of brick work or stone boulder masonary built in cement mortar including all quions ,arcches , pillars etc complete all as specified and as directed |
| 10 | M&L for fly ash bricks,with old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed |
| 11 | M&L forstonewalling of random rubble stone masonary, uncoursed, well bounded, bedded & solidely hearted built in cement mortar (1:6) using locally available best stone complete all as specified and directed |
| 12 | Extra over stone wallling for hammer dressing to face stones & dressing to face beds and joints as specified at RR walling uncoarsed or brought upto coarse, max depression on face from straight edge held against the dressed surface n.exc 20 mm complete all as specified and directed |
| 13 | M&L for PCC type C1 1:3:6 (20 mm graded aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 14 | M& L for raised pointing to RR, uncoarsed or brought upto course stone masonry in CM 1:4 complete all as specified and directed. |
| 15 | Demolition of reinforced cement concrete of any description and in any position not otherwise described comlplete all as specified and directed. |
| 16 | M&L RCC type B-1 1:2:4 using 20mm graded stone aggregateas in kitchen shelves , manhole cover, etc including dismantling of existing RCC workcomplete all as specified and directed. |
| 17 | M&L form work to suspended slab as in kitchen shelves etc.complete all as specified and as directed |
| 18 | M&L for Mild steel bars (TMT bars)5mm dia and over upto and including 10mm dia in strriups,spaces,nibs and binders complete all as specified and directed. |
| 19 | M&L TMTbar 10 mm dia and over, cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns,hooking end and binding with and including mild steel wire and annealednot less than .9 mm dia or securing with clips complete all as specified and directed. |
| 20 | Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified andas directed. |
| 21 | M&LRendering15mmthickonfairfacesofbrick work or concrete surface in cement plaster 1:4 finishing the surface even & smooth without using extra cement & with WPC (WPC will be measured & paid seperately) complete all as specified & as directed. |
| 22 | SupplyonlyWPC.(IntegralWaterProofing Compound)complete all as specified & as directed. |
| 23 | M&L forapplyingprimer of same make(as of exterior weather proof water base emulsionpaint )onwhite cement based putty allas specified and directed. (Putty shall be measured and paid seperately under relevant Item)complete all as specified & as directed. |
| 24 | Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails marks by filling with white cement base putty and applying two coat ofexterior weather proof water base emulsionpaint white/coloured. Make Asian- Apex or Equivalent complete all as specified & as directed. |
| 25 | M & L for preparation of newly plastered/Putty surfaces of wallsand applying two coat exterior weather proof water base emulsionpaint white/coloured over a coat of primer same make baseall as specified and directed.Make Asian- Apex or Equivalent. Note:- Primer& Putty shall be measured and paid seperately under relevant Itemcompleteall as specified and directed |
| 26 | M&L for preparation of newly plaster surface of wall and and apply 2mm thick cement base wall care putty in two coat (each coat not less than 1mm) over a coat of primer on walls and surface finished even and smooth with sand paper completeall as specified and directed |
| 27 | M&L for removal of complete existing treatment of wall(any no. of layers) and apply 2mm thickwhite cement base wall care putty in two coats (each coat not less than 1mm) on wallsand surface finished even and smooth with sand paper completeall as specified and directed |
| 28 | M & L for preparation of newly plastered surfaces and applying three coats of white wash complete all specified and directed. |
| 29 | S& F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165for portionsframedandhungas gates,includingpintlehinges, stops, hand-made sliding bolts, etc. complete all as specified and as directed. |
| 30 | Dismantling of Asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings etc complete all as specified and as directed. |
| 31 | Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in un-framed work complete all as specified and directed. |
| 32 | M&L inforJoist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming Fe-290 (Gde E165) complete all as specified and as directed. |
| 33 | S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161:1979 grade St.-240 complete all as specified and as directed. |
| 34 | S&F of 0.5mm thick Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strengthof550Mpaasinroofcovering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 35 | DittoallasperitemNo.34here-in-beforebut plainasinridgecompleteallasspecifiedand directed. |
| 36 | M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over and including one coat of red oxide, zinc chrome primer complete all as specified and as directed. |
| 37 | M & L for 75 mm thick cement concrete type C- 1, 1:3:6 (20mm graded aggregate) finishing even and smooth without using extra cementas in plinth protection complete all as specified and directed by Engineer-incharge. |
| 38 | M&L for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in surface channel and drains complete all as specified and directed. |
| 39 | M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered /stopped ends etc |
| 40 | M&L for preparation of old concreate/PCC tile surfaces by brooming with coir/wire brushes and wahsing down with water to remove the fine dust and applying two coats of Lacquer polish (1001) chemical with pigment as approved complete all as specified and directed. |
