|
| 1 | Taking out the submersible pump/Openwell Submersible Pump set forrepairsand lowering down after repairs the submersible pump set of any capacity& of any type from the bore well to a depth of not exc. 70 mtrs including scrapping of the existingpaint of submersible pump set and applying two coats of anti corrosive paint over a coat of primer complete after repair / replacement of spares and commisssioning all as directed by Engr-in-Charge.NOTE: COST OF REPAIR SHALL BE MEASURED AND PAID AGAINST RELEVANT ITEM |
| 2 | Repairs to submersible Pump set of electric driven of any type make and capacity upto 5 HP incl rewinding of the motor with same gauge and weightof PVC insulated copper conductor incl renewal of thrust plate,CI bowl,pump shaft,impeller ,Bearing,strainer,bush cable gaurd etc. reassembling, testing and commissioningcomplete all as directed by Engr-in-Charge. |
| 3 | Repairs toNon clog ,Open well submersible Pump set of electric driven of any type make and capacity upto 5 HP incl rewinding of the motor with same gauge and weightof PVC insulated copper conductor incl renewal of Mechanical seal, Bearing ,thrust plate,CI bowl,pump shaft,impeller ,strainer,bush cable gaurd etc. reassembling, testing and commissioningcomplete all as directed by Engr-in-Charge. |
| 4 | Renewal of column pipe 50 mm dia heavy duty ISI marked ,10 feet lengthboth ends machine threaded with longthread heavy duty socket complete all as directed by Engr-in-Charge. |
| 5 | Replacement of unserviceablePVC weather proof cable and replacementwithnewPVC weather proofcopper cable for size3 core2.5 sqmm suitable for submersible pump set complete all as directed by Engr-in-Charge. |
| 6 | Replace of non return valve gun metal 50 mm bore complete all as directed by Engr-in-Charge. |
| 7 | Replace of non return valve gun metal 150 mm bore complete all as directed by Engr-in-Charge. |
| 8 | Taking outold unserviceable MCCB 400/360 Amps and replacing the same with new MCCB 415 V,25 KA ,4 Pole ,400 Ampsall as directed. |
| 9 | Taking outold unserviceable MCCB 250 Amps and replacing the same with new MCCB 415 V,25 KA ,4 Pole ,250 Ampsall as directed. |
| 10 | Taking outold unserviceable MCCB 200 Amps and replacing the same with new MCCB 415 V,25 KA ,4 Pole ,200 Ampsall as directed. |
| 11 | Taking outold unserviceable MCCB 160 Amps and replacing the same with new MCCB 415 V,25 KA ,4 Pole ,160 Amps. |
| 12 | Taking outold unserviceable MCCB 100 Amps and replacing the same with new MCCB 415 V,25 KA ,4 Pole ,100 Amps. |
| 13 | Taking outold unserviceable MCCB 63 Amps and replacing the same with new MCCB 415 V,25 KA ,4 Pole ,63 Amps. |
| 14 | Material and labour for reparing/maintenance of existing electrical panel boards of pump sets by replaing worn out spares as starter/single phase preventor/relay /contactors MCCB\"s / MCB\"s / switch gear / cable glands/ lugs pin type,U type etc, cleaning of panel board, tightening of cable connection to avoid sparking, insulating bus bars bracket portion of conductor and to ensuring proper function of the panel board all as directed by Eng-in-Charge.NOTE: ( I ) Cost of spares as starter /single phase preventor/voltmeter/Amp meter/ relay / contactor /MCCB\"s/ MCB\"s / Switch gear / cable gland etc shall be measuredand paid against relevant item.(ii) Cost of lugs (pin type / U Type) ,insulation taps shall be included in quoted rate.(iii) Cost of fixing of spares shall deemed to be included in quoted rate. |
| 15 | Renewals/replacingthe followingspares to the existing elecrical panels complete all as directed by Engr-in-Charge. |
| 16 | S& F Voltmeter/Ammeter ,3 phase for range 0-200A Class-I, suitable as per existing |
| 17 | S&F in replacement of old unserviceable contactor ofcapacity upto 45 A,power operating voltage 415 V AC Capacity 3 pole with AC coil etc, suitable for existing contactor |
| 18 | S&F in replacement of old unserviceable contactor ofcapacity upto 95 A,power operating voltage 415 V AC Capacity 3 pole with AC coil etc, suitable for existing contactor |
| 19 | S&F in replacement of old unserviceable contactor ofcapacity upto 110/120 A,power operating voltage 415 V AC Capacity 3 pole with AC coil etc, suitable for existing contatctor |
| 20 | Over load relay 3 phase 415 Volts with range 16 to 45 A suitable for existing |
| 21 | Over load 3 phase 415 Volts relay with range 45 to 88 A suitable for existing |
| 22 | S& F Single phase preventor including Timer,415 V suitable for 100 HP motor. |
| 23 | Dismantling the centrifugal Pump/monoblock pumpset with motor of capacity Upto 3HP including disconnecting suction and delivery, power supply cable etc and reassembling same after replacement of necessary spares including greasing and painting of 2 coats of synthetic enamel paint using spray machine complete and replacing the same and testing all as specified and as directed by Engr in charge.NOTE: 1.In case of Centrifugal pump dismantling of pump and motor will be paid seperatly.2. In case of Monoblock pumpset pump/motor paid as one3. Spares such as bearing, bush, gland packing, coupling, capacitor will be measured & paid seperately |
| 24 | All as per item no 16 but for the capacity of 5 HP to 7.5 HP |
| 25 | All as per item no 16 but for the capacity of 10 HP to 15 HP |
| 26 | All as per item no 16 but for the capacity of 20 HP to 30 HP |
| 27 | All as per item no 16 but for the capacity of 40HP to 50HP. |
| 28 | All as per item no 16 but for the capacity of 60HP to 75 HP |
| 29 | All as per item no 16 but for the capacity of 90HP to 100HP |
| 30 | Supply only following worn out spares of Centrifugal/monoblock pump sets. |
| 31 | Bearing as per existing Size suitable for up to 3HP motor |
| 32 | Bearing as per existing Size suitable for 5HP to 7.5 HP motor |
| 33 | Bearing as per existing Size suitable for 10 HP to 12.5 HP motor |
| 34 | Bearing as per existing Size suitable for 20 HP to 30HP motor |
| 35 | Bearing as per existing Size suitable for 40HP to 50 HP motor |
| 36 | Bearing as per existing Size suitable for 60HP motor |
| 37 | Bearing as per existing Size suitable for 75 HP motor |
| 38 | Bearing as per existing Size suitable for 90 HP motor |
| 39 | Bearing as per existing Size suitable for 100 HP motor |
| 40 | Rubber bush/star rubber for coupling as per existing size for upto 30 HP motor |
| 41 | Rubber bush/star rubberfor coupling as per existing size forupto 50HP motor |
| 42 | Rubber bush/star rubber for coupling as per existing size forupto 75 HP motor |
| 43 | Rubber bush/star rubber for coupling as per existing size for upto90 HP motor |
| 44 | Rubber bush/star rubber for coupling as per existing size for upto 100 HP motor |
| 45 | Gland packingupto30 HP pump |
| 46 | Gland packing for 40 HP motor |
| 47 | Gland packing for 50 HP motor |
| 48 | Gland packing for 60 HP motor |
| 49 | Gland packing for 75 HP motor |
| 50 | Gland packing for 90 HP motor |
| 51 | Gland packing for 100 HP motor |
| 52 | Supply and replace old worn out couling with new Tyre coupling including machining,suitable to shaft dia of pump and motor of 5HP,12.5HP,20HP |
| 53 | Supply and replace old worn out couling with new Tyre coupling including machining,suitable to shaft dia of pump and motor of 30HP,40HP,50HP |
| 54 | Supply and replace old worn out couling with new Tyre coupling including machining,suitable to shaft dia of pump and motor of 60HP,75HP,90HP,100HP |
| 55 | Overhauling/servicing of Suction sweeper assembly trolley mounted with mud pump motor head 11.5 mtr make; Kirloskar for swimming pool complete all as specified and directer by Engr-in-charge. Notes:- including spares require for making the assembly serviceable deemed to be included in subjected item. |
| 56 | M & L for Rewinding ofelectric motor 3 phase, 415 Volt capacity 1/2HP TO 3 HP, incoming disconnection electric connections, dismantling slots, taking out burnt windings and rewinding the motor with super enameled copper wire as per existing size including insulating material and varnishing,greasing, painting with super enameled paint as per colour coad assembling the motor after rewinding and mounting at its ownposition, replacing the old nut,bolts and testing all as directed. |
| 57 | All as per item no. 28 but for the capacity of 5HP. |
| 58 | All as per item no. 28 but for the capacity of 10HP,12.5HP |
| 59 | All as per item no. 28 but for the capacity of 15HP,20HP. |
| 60 | All as per item no. 28 but for the capacity of 30HP. |
| 61 | All as per item no. 28 but for the capacity of 40HP |
| 62 | All as per item no. 28 but for the capacity of 50HP |
| 63 | All as per item no. 28 but for the capacity of 60HP. |
| 64 | All as per item no. 28 but for the capacity of 75HP. |
| 65 | All as per item no. 28 but for the capacity of 90HP. |
| 66 | All as per item no. 28 but for the capacity of 100HP. |
| 67 | Taking out unserviceable foot valve 80 mm dia from the UG sump and S & F new foot valve 80 mm dia ball typeincl rubbergasket, bolts, buts complete all as directed. |
| 68 | Taking out unserviceable foot valve 100 mm dia from the UG sump and S & F new foot valve 100mm dia ball typeincl rubbergasket, bolts, buts complete all as directed. |
| 69 | Taking out unserviceable foot valve 150 mm dia from the UG sump and S & F new foot valve 150mm dia ball typeincl rubbergasket, bolts, buts complete all as directed. |
| 70 | Supply and fix spares for pumps of DSM 150/45, DSM 100/36, DSM 125/45, DBHS |
| 71 | a) Impeller 1st , II nd Stage |
| 72 | b) Pump Shaft |
| 73 | c) Shaft sleave |
| 74 | d) Cartrige bearing DE/NDE |
| 75 | e) Through bush |
| 76 | f) Split gland coupling |
| 77 | g) Wear ring |
| 78 | h) Lantern Ring |
| 79 | h) Gland coupling |
| 80 | Supply and replacing Automatic DOL starter suitable up to5 HP submersible/ centrifugal pump set |
| 81 | Supply and replacing Automatic star Delta starter suitable 7.5 HP to 12.5 HP submersible/ centrifugal pump set |
| 82 | Replacement of nuts bolts to top & bottom cover of DSM pump 100 HP, 90 HP, 75 HP. |
| 83 | Supply & fixing in replacement LT cable 1100 volts grade PVC insulated multistranded copper conductor cable single core of size 35 sqmm. |
| 84 | M&L for cleaning and sterilization of inside the RCC/ Steel Underground/semi underground/Over head/Sedmentation/clear water sumpsof capacity.(a). First Stage is to drain out the water by using exit valve or high capacity dewatering system. (b). Second stage is cleaning all the algae formation inside the tank .(c). Third strage is fresh water cleaning by high speed jet pump.(d). Fourth stage and first bacteria screening is decertification.(e). Fifth stage is cleaning the floor of water tank by industrial vaccum cleaner. (f) . Sixth stage is the second bacterio screening and sterilizing method by using ultra violet ray within the tnk and kills all suspended bacteria. (g)Seventh stage of cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified, branded strong oxidizing agent. NOTE:-(i) COMPANY WILL SUBMIT LABORATORY TEST CERTIFICATE OF CHEMICAL USED BEFORE CLEANING, FIX THE STICKER MENTIONING THE DATE OF CLEANING & NAME OF SITE AND ALSO PROVIDE CERTIFICATE CONFIRMING THE COMPLETION OF STERILIZATION OF WATER TANKS MENTIONING THE NAME OF STATION AND DATE OF CLEANING. ALL THE CLEANING & STERILIZATION STAFFS SHOULD BE UNDER ACCIDENTAL INSURANCE COVERAGE. (ii) OUTLET PIPE OF OHT SHOULD BE PLUGGED BEFORE CLEANING THE OHT TO AVOID.ENTERING SCALS AND THE SAME SHELL BE RECONNECTED AFTER CLEANING THE OHT AND THE QUOTED RATE IS DEEMED TO INCLUDE FOR THE ROVISION . (III) STERILIZATION TEAM WILL BE COMPRISED OF AT LEAST 30% MEMBERS WHO ARE MINIMUM03 MONTHS CERTIFICATE HOLDER IN WATER TANKS STERILIZATION. (IV) CONTRACTOR WILL BE RESPONSIBLE FOR RECTIFICATION OF COMPLAINTS OCCURRED DURING CLEANING THE TANK IE. NO WATER IN TANK/OVER FLOW DUE TO BROKEN OF FLOAT VALVE/ BLOCKAGE TO BE INCLUDED IN QUOTED RATE. NOTE:-THE WORK SHALL BE CARRIED THROUGH SPECILIZED AGENCY. |
| 85 | a)All as per Item no. 50 but for UG sump 100000 gallons capacity |
| 86 | b) All as per Item no. 50 but for UG sump10,000 gallons capacity |
| 87 | c)All as per Item no. 50 but for UG sump50000/30000 gallons capacity |
| 88 | d)All as per Item no. 50 but for O H Reservoir 300000 glns capacity |
| 89 | e)All as per Item no. 50 but for O H Reservoir 50000 glns capacity |
| 90 | f)All as per Item no. 50 but for O H Reservoir 150000 glns capacity |
| 91 | g)All as per Item no. 50 but for O H Reservoir 10000 glns capacity |
| 92 | h)All as per Item no. 50 but for O H Reservoir 25000 glns capacity |
| 93 | Cleaning fire static tank for fire fighting system drain out of water and taking out the sludges from the bottom ofthe static tank and clean surface by scraping and two coats of white cement washof capacity up to 10000 Glns complete all as specified and directed by Engr-in-charge |
| 94 | Cleaning fire static tank for fire fighting system drain out of water and taking out the sludges from the bottom ofthe static tank and clean surface by scraping and two coats of white cement washof capacity 10001 to 15000 Glns complete all as specified and directed by Engr-in-charge |
| 95 | Cleaning fire static tank for fire fighting system drain out of water and taking out the sludges from the bottom ofthe static tank and clean surface by scraping and two coats of white cement washof capacity 15001 to25000 Glns complete all as specified and directed by Engr-in-charge |
| 96 | Cleaning fire static tank for fire fighting system drain out of water and taking out the sludges from the bottom ofthe static tank and clean surface by scraping and two coats of white cement washof capacity 50000 Glns complete all as specified and directed by Engr-in-charge |
| 97 | S&F spare parts of chlorine dozers at various loaction as per directed by Engineer in charge |
| 98 | a) Pump head (ferrules 1/4 & duckbill included) |
| 99 | b) Pump Tube (pack of 5) |
| 100 | c) Injection cheack valve 3/8\" |
| 101 | d) 3/8 \" white suction/discharge tubing |
| 102 | e) Check valve duck bill only (pack of 5) |
| 103 | f) Connecting nut 3/8 \" |
| 104 | g) Connecting nut 3/8 with adapter(pack of 5) |
| 105 | h) Ferrule 1/4 \" (pack of 24) |
| 106 | Supply and fix XLPE insulated, armoured heavy duty electric cable withn aluminium conductor, 1100 volts grade, cross-sectional area 95 sq. mm,3.5 core as per direction of Engineer in charge |
| 107 | Supply and fix wall mounted metal enclosure consist of On load change over of capacity 250 Amps 415V, 4 pole to be installed as per the direction of Engineer in charge |
| 108 | Supply and fix wall mounted metal enclosure consist of On load change over of capacity 400 Amps 415V, 4 pole to be installed as per the direction of Engineer in charge |
| 109 | Supply only drinking water testing Kit having testing water parameter like PPM of chlorine,PH etc . |
| 110 | Supply only O tolidine reagent for testing of chlorine content in drinking water as per direction of engineer in charge. |
| 111 | Supply only swimming pool water clarifier as per direction of Engineer in charge |
| 112 | M & L for installation of sign board made of 3mm ACP sheet pasted on Recto Reflective Sign Board ncluding Frame working, SS Steel, fitting & Concreting work complete all as per direction and approval of Engineer in charge (Notes :- Matter/colour to be printed shall be provided by Deptt) |
| 113 | Material & Labour for painting of Pumps inlcuding motor, suction & Discharge Pipes of capacity upto 12.5 HP |
| 114 | Material & Labour for painting of Pumps inlcuding motor, suction & Discharge Pipes of capacity upto 50 HP |
| 115 | Material & Labour for painting of Pumps inlcuding motor, suction & Discharge Pipes of capacity upto 100 HP |
